TTSHSM-502-D-06-T-V-K-LF

8 7 6 4 5 2 3 1 F F Recomended P.C. Board Layout SCALE 6:1 .105 [2.67] .269 [6.84] E E .050[1.27] .026[0.66] .050[1.27] x No. of Positions TTSHSM-5 XX - D - 06 - XX - V - XXX - K - XX - X - LF (A) (B) (C ) (D) (E) (F) (G) (H) (I) (J) A. Pins Per Row - 1 through 40 B. Row Specification - D= Double Row C. Pin Options - See Pin Option box below Mates with: D. Plating Options LSSHS - See Plating Options below SMSS E. Vertical SSHS. F. Polarized Position - Leave blank if not required - e.g. .200[5.08] =200 G. K= Keying Shroud H. Packing Information - TR= Tape and Reel - TB= Tube I. Pad - P= Plastic - O= No Pad - If left blank, packaging at MLE’s discretion Pad may be metal, mylar, or plastic J. Lead Free .050 [1.27] D 01 .016[0.40] Sq. C G T GT H F FT .050[1.27] x No. of Positions - .050[1.27] .200[5.08] .085[2.16] .099 [2.51] B .115 [2.92] .050[1.27] Pin Options Post Height .120 3.05mm 06 Specifications: Current Rating: 1.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 300V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40°C to +105°C Max. Process Temperature Peak: 260°C up to 10 secs. Process: 230°C up to 60 secs. Wave: 260°C up to 6 secs. Reflow: 260°C up to 10 sec. Manual Solder: 350°C up to 5 secs. .126 [3.20] .120 [3.05] Plating options -10µ Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10µ Gold on Contact Area/ Matte Tin on Tail -30µ Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail D C B Materials: Contact Material: Phosphor Bronze Insulator Material: Nylon 6T Plating: Au or Sn over 50µ” [1.27] Ni .135[3.43] .198[5.03] .230[5.84] Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. UNLESS OTHERWISE SPECIFIED: A PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 8 7 6 5 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS ±.100 TWO DECIMAL ±.100 THREE DECIMAL ±.005 FOUR DECIMAL ±.002 3 04/27/16 CHECKED GWE 04/27/16 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: TTSHSM-5-V-K SERIES SIZE DWG. NO. REV C A SCALE 10:1 SHEET 1 OF 1 1