1005S24FPW

www.make-ps.com E-mail:info@make-ps.com 1000FPW series Single & Dual Output DC/DC Converter FEATURES • • • • 6 sided Continuous Shielding Wide 2:1 Input Voltage Range Efficiency to 83% >700,000 Hours MTBF DESCRIPTIONS The 1000PFW series is a family of compact 10 W, high performance DC/DC converters. These converters are specifically designed to provide the flexibility, power density, and reliability required to fulfill local power needs in applications ranging from telecom switch systems to portable instrumentation. 24 models operate over 2:1 input ranges of 9 to 18, 18 to 36 or 36 to 72 VDC; providing single, dual or triple output combinations of 3.3, 5, 12, 15, 24, ±5, ±12 and ±15 VDC. All models are packaged in compact, low profile 2.0” X 1.0” X 0.4” metal cases. INPUT CHARACTERISTICS Min Typ Max Unit/Comments Input Voltage Range 12 VDC Input Models 24 VDC Input Models 48 VDC Input Models Input Filter 9 18 36 12 24 48 18 36 72 VDC VDC VDC Pi Filter OUTPUT CHARACTERISTICS Output Voltage Accuracy Voltage Balance: Dual Outputs Line Regulation Load Regulation Single Outputs Dual Outputs Ripple/Noise Short Circuit Protection Temperature Coefficient Minimum Load Min Typ Max Unit/Comments ±1.0 % 1 ±2.0 %; Equal Output Loads ±0.3 % 2 ±0.5 % 3 ±0.5 % 3 ; Equal Loads 100 mV Pk-Pk Continuous, Automatic Recovery ±0.02 % per oC 10 % Full load GENERAL CHARACTERISTICS Switching Frequency Isolation Voltage Isolation Resistance MTBF (MIL-HBK-217F) Min Typ Max Unit/Comments kHz 350 VDC, 1 minute 1500 Mohm, 500VDC 1000 Thousand Hours, 700 +25oC, Ground Benign 1 2 3 = Output voltage at nominal line & FL = % Output voltage measured from min. input line to maximum = Output voltage measured from FL to 10% Load >> 1 www.make-ps.com ENVIRONMENTAL SPECIFICATIONS Operating Temp. Range Storage Temp. Range Relative Humidity Cooling Min -25 -40 Typ Max +71 +125 95 Unit/Comments o C; Ambient o C % Humidity; noncondensing Free-Air Convection E-mail:info@make-ps.com PHYSICAL CHARACTERISTICS Case Size Case Material Flammability Weight Unit/Comments 2.0 X 1.0 X 0.4 inches (50.8 X 25.4 X 10.2 mm) Coated Metal with NonConductive Base UL94V-0 32 Grams OUTLINE DRAWING .40 [10.2] .40 [10.2] .10 [2.54] 5X Ø.04 [1.0] Ø .04 [1.00] 3 4 5 .80 [20.32] BOTTOM 1 2 2.00 [50.80] SIDE .60 [15.24] .24 [6.0] .20 [5.08] .40 [10.16] 1.00 [25.40] .40 [10.16] PIN OUT CHART Pin 1 2 3 4 5 Single + Vin - Vin + Vout No Pin -Vout Dual + Vin - Vin + Vout Common - Vout Notes: 1. Unless otherwise specified dimensions are in inches (mm). Tolerances Inches mm X.XX = ±0.02 X.X = ±0.5 X.XXX= ±0.010 X.XX = ±0.25 2. Pin ±0.002 ±0.05 All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified. External, low ESR, 10 microfarad (minimum) capacitor across output is recommended for operation. >> 2 www.make-ps.com HOW TO ORDER E-mail:info@make-ps.com HOW TO ORDER 10 XX D XX FPW - Y Wattage Output Voltage Output Configuration (S=Single, D=Dual) RoHS Compliant Model Series Nominal Input Voltage MODEL SELECTION CHART Model Full Load Nominal Input Voltage No Load Input Current Input Current Range Input Voltage (mA) (mA) (VDC) (VDC) 12 12 12 12 12 24 24 24 24 24 48 48 48 48 48 12 12 12 24 24 24 48 48 48 9 - 18 9 - 18 9 - 18 9 - 18 9 - 18 18 - 36 18 - 36 18 - 36 18 - 36 18 - 36 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 9 - 18 9 - 18 9 - 18 18 - 36 18 - 36 18 - 36 36 - 72 36 - 72 36 - 72 40 40 40 40 40 20 20 20 20 20 10 10 10 10 10 40 40 40 20 20 20 10 10 10 917 1110 1050 1050 1040 434 534 510 510 502 217 260 253 253 251 1068 1040 1040 520 507 507 257 251 251 Output Voltage (VDC) 3.3 5 12 15 24 3.3 5 12 15 24 3.3 5 12 15 24 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 Full Load Output Current (mA) 2400 2000 830 670 416 2400 2000 830 670 416 2400 2000 830 670 416 ±1000 ±416 ±333 ±1000 ±416 ±333 ±1000 ±416 ±333 Efficiency (%) 1003S12FPW 1005S12FPW 1012S12FPW 1015S12FPW 1024S12FPW 1003S24FPW 1005S24FPW 1012S24FPW 1015S24FPW 1024S24FPW 1003S48FPW 1005S48FPW 1012S48FPW 1015S48FPW 1024S48FPW 1005D12FPW 1012D12FPW 1015D12FPW 1005D24FPW 1012D24FPW 1015D24FPW 1005D48FPW 1012D48FPW 1015D48FPW 72 75 79 79 80 76 78 82 82 83 76 80 82 82 83 78 80 80 80 82 82 81 83 83 >> 3 www.make-ps.com DERATING CURVES E-mail:info@make-ps.com MODEL 1000FPW Pout % 100 90 80 70 60 50 40 30 20 10 0 -40 100LFM Natural Convection 400LFM 200LFM 50 60 70 80 90 100 110 TEMPERATURE ° C >> 4