1512S24WFR

www.make-ps.com E-mail:info@make-ps.com 1500WFR series Single and Dual Output DC/DC Converter FEATURES • • • • • • • 15W Continuous Output Power Compact 1” X 2” X 0.4” Case Industry Standard Pin-Out Up to 82% Efficiency -25oC to +71oC Operating Temperature Range 18.75W/In3 Power Density Low Cost DESCRIPTIONS The 1500WFR series is a family of low cost single and dual output 15W DC/DC converters specifically designed for spacecritical applications. These models operate from wide (2:1) input voltage ranges of 18 to 36 or 36 to 72 VDC; and provide regulated outputs of 5, 12, 15, ±12 or ±15 VDC. Standard features include 500 VDC input/output isolation, an internal input filter, line/load regulation of ±1.0% and a minimum switching frequency of 190 kHz. All models are packaged in compact, low profile 1” X 2” X 0.4” inch metal case. This miniature size yields a power density as high as 18.75 watts/in3. Operation is specified over the full operating temperature range of -25 oC to +71 oC. Cooling is by free-air convection. INPUT CHARACTERISTICS Min Typ Max Unit/Comments Input Voltage Range 24 VDC Input Models 48 VDC Input Models Input Filter 18 36 24 48 36 72 VDC VDC Pi Networks OUTPUT CHARACTERISTICS Output Voltage Accuracy Output Voltage Balance Dual Outputs Minimum Load Line Regulation Load Regulation Ripple/Noise Transient Response Temperature Coefficient Short Circuit Protection Min Typ Max Unit/Comments ±1.0 %; Output voltage at nominal line & FL ±1.0 %; Equal Output Loads 10% of Full Load ±0.2 % 1 ±1.0 % 2 100 mV p-p, Nom.Line FL, 20Mhz B.W. using 1 μf bypass capacitor 500 μS to within 1% error band for 25% step load change ±0.02 % per oC Current Limit, Continuous GENERAL CHARACTERISTICS Switching Frequency Isolation Voltage Isolation Resistance Min Typ Max Unit/Comments kHz 190 VDC, 1 minute 500 Mohm, 500VDC 1000 1 2 = % Output voltage measured from min. input line to maximum at 100% Load. = Output voltage measured from 25% Load to 100% Load, at Nominal Line. >> 1 www.make-ps.com ENVIRONMENTAL SPECIFICATIONS Operating Temp. Range Storage Temp. Range Maximum Case Temp. Derating Relative Humidity Cooling Min -25 -40 Typ Max +71 +100 +100 Unit/Comments o C; Ambient o C o C None Required 95 % Humidity; noncondensing Free-Air Convection E-mail:info@make-ps.com PHYSICAL CHARACTERISTICS Case Size Case Material Pin Coating Shielding Weight Unit/Comments 1.0 X 2.0 X 0.4 inches (25.4 X 50.8 X 10.2 mm) Black Coated Metal with NonConductive Base Tin (-Y models) Six Sided Continuous 35 Grams OUTLINE DRAWING 0.40 (10.2) 0.40 (10.2) 0.10 (2.54) 3 4 5 + Vout Common - Vout or No Pin .040± .005 (1.0) DIA. 0.80 (20.3) BOTTOM 1 2 SIDE (50.8) 2.00 +Vin - Vin 0.60 (15.2) 0.40 (10.2) 0.22 MIN. (5.6) 0.40 (10.2) 0.40 (10.2) 1.00 (25.4) PIN OUT CHART Pins 1 2 3 4 5 Single + Vin - Vin + Vout No Pin - Vout Dual + Vin - Vin + Vout Common - Vout Notes: 1. Unless otherwise specified dimensions are in inches (mm). Tolerances Inches mm X.XX = ±0.02 X.X = ±0.5 X.XXX= ±0.010 X.XX = ±0.25 2. Pin Coating: Tin (-Y models) All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified. External, low ESR, 10 microfarad (minimum) capacitor across input is recommended for operation. >> 2 www.make-ps.com HOW TO ORDER E-mail:info@make-ps.com HOW TO ORDER 15 XX S XX WFR - Y Wattage Output Voltage Output Configuration (S=Single, D=Dual) ROHS Compliant Series Nominal Input Voltage MODEL SELECTION CHART Model Nominal Input Voltage (VDC) 24 24 24 24 24 48 48 48 48 48 Input Voltage Range (VDC) 18 - 36 18 - 36 18 - 36 18 - 36 18 - 36 36 - 72 36 - 72 36 - 72 36 - 72 36 - 72 Output Voltage (VDC) 5 12 15 ±12 ±15 5 12 15 ±12 ±15 Output Current (mA) 3000 1250 1000 ±625 ±500 3000 1250 1000 ±625 ±500 No Load Input Current (mA) 20 20 20 30 30 10 10 10 10 10 Full Load Input Current (mA) 800 780 780 780 780 390 380 380 380 380 Output Efficiency @ FL (%) 78 80 80 80 80 80 82 82 82 82 1505S24WFR 1512S24WFR 1515S24WFR 1512D24WFR 1515D24WFR 1505S48WFR 1512S48WFR 1515S48WFR 1512D48WFR 1515D48WFR >> 3