215D24UFR

215D24UFR

  • 厂商:

    MAKE-PS

  • 封装:

  • 描述:

    215D24UFR - Single & Dual Output DC/DC Converter - Make-Ps

  • 详情介绍
  • 数据手册
  • 价格&库存
215D24UFR 数据手册
www.make-ps.com E-mail:info@make-ps.com 200UFR series Single & Dual Output DC/DC Converter FEATURES • • • • • • • Up to 80% Efficiency 1500 VDC Isolation 4:1 Input Range Low Ripple and Noise Short Circuit and Over Current Protection Remote On/Off Internal SMD construction DESCRIPTIONS The 200UFR series are 2 watts power modules designed to provide low output ripple and wide operating temperature range of -40oC to +85oC in a low-profile SIP package. The series consists of 14 models with input voltages of 24V and 48V, and offers regulated output voltages of 3.3V, 5V, 12V, 15V, ±5V, ±12V and ±15V. The 200UFR are ideal for datacom, mobile battery driven equipment, distributed power architectures, telecommunication equipment, mixed analog/digital subsystems, automatic test instrumentation and industrial robot systems. INPUT CHARACTERISTICS Min Typ Max Unit/Comments Input Voltage 24 VDC Input Models VDC 24 36 9 48 VDC Input Models VDC 18 48 75 Input Fuse Requirements 24 VDC Input Models mA; Slow blow type 350 48 VDC Input Models mA; Slow blow type 135 Start Voltage VDC 9 7 Under Voltage Shutdown VDC 9 6 Remonte On VDC 0.6 Remote Off VDC 2.7 Control Input Current (ON) mA 1 Control Input Current (OFF) mA 1 Input Filter Pi Filter OUTPUT CHARACTERISTICS Output Voltage Set Point Line Regulation Min Typ Max Unit/Comments ±2.0 % Output voltage at nominal line & FL ±0.2 ±0.5 % Output voltage measured from min. input line to maximum ±0.75 % Output voltage measured from FL to 25% load 75 mV p-p, Over Line, Load & Temp., 20 MHz B.W., 25% to 100% FL see Note 1 see Note 1 ±0.01 ±0.02 % per degree C GENERAL CHARACTERISTICS Switching Frequency Isolation Voltage Isolation Resistance Isolation Capacitance MTBF (MIL-HBK-217F) Min Typ Max Unit/Comments kHz 300 VDC, 1 minute 1500 Mohm, 500VDC 1000 250 500 pF, 100kHz, 1Volt Million Hours, 1 +25oC, Ground Benign Load Regulation Ripple/Noise Overload Protection Short Circuit Protection Temperature Coefficient Note 1: Overload time should be limited to 10 sec and/or the temperature should be maintained > B-37 www.make-ps.com ENVIRONMENTAL SPECIFICATIONS Operating Temp. Range Storage Temp. Range Relative Humidity Cooling Min -40 -40 Typ Max +85 +105 95 Unit/Comments C; Ambient o C % Humidity; noncondensing Free-Air Convection o E-mail:info@make-ps.com PHYSICAL CHARACTERISTICS Case Size Case Material Flammability Weight Unit/Comments 1.02 X 0.36 X 0.49 inches (25.95 X9.25 X 12.45 mm) Non-Conductive Black Plastic UL94V-0 6.5 Grams OUTLINE DRAWING SIDE VIEW 0.49 (12.45) 0.13 (3.2) 0.08 (2.03) 0.1(2.54) 0.1(2.54)x8 = 0.8(20.32) 1.02 (25.95) 0.36 (9.25) BOTTOM VIEW 1 2 3 6 7 8 9 0.012(0.3) PIN 7 PLACES 0.114 (2.9) 0.02(0.5) PIN 7 PLACES PIN OUT CHART Pins 1 2 3 6 7 8 9 SINGLE DUAL - V in - V in + V in + V in Remote On/Off Remote On/Off + V out +V out NC COMMON NC NC - V out - V out Notes: 1. Unless otherwise specified dimensions are in inches (mm). Tolerances Inches mm X.XX = ±0.01 X.X = ±0.25 X.XXX= ±0.005 X.XX = ±0.13 Pin : ±0.002 ±0.05 NC = No Connection >> B-38 www.make-ps.com HOW TO ORDER E-mail:info@make-ps.com HOW TO ORDER 2 15 Wattage Output Voltage Output Configuration (S=Single, D=Dual) D XX UFR - Y ROHS Compliant Series Nominal Input Voltage MODEL SELECTION CHART Model Nominal Input Voltage (VDC) 24 24 24 24 48 48 48 48 24 24 24 48 48 48 203S24UFR 205S24UFR 212S24UFR 215S24UFR 203S48UFR 205S48UFR 212S48UFR 215S48UFR 205D24UFR 212D24UFR 215D24UFR 205D48UFR 212D48UFR 215D48UFR Input Voltage Range (mA) 9 - 36 9 - 36 9 - 36 9 - 36 18 - 75 18 - 75 18 - 75 18 - 75 9 - 36 9 - 36 9 - 36 18 - 75 18 - 75 18 - 75 Output Voltage (VDC) 3.3 5 12 15 3.3 5 12 15 ±5 ±12 ±15 ±5 ±12 ±15 Full Load Output Current (mA) 500 400 167 134 500 400 167 134 ±200 ±83 ±67 ±200 ±83 ±67 No Load Input Current (mA) 20 20 20 20 15 15 15 15 20 20 20 15 15 15 Full Load Input Current (mA) 97 110 106 105 49 58 54 54 144 108 106 60 55 55 Efficiency (%) Full Load 71 76 79 80 70 72 78 78 73 77 79 70 76 76 >> B-39 www.make-ps.com DERATING CURVES E-mail:info@make-ps.com MODEL 200UFR Pout % 100 90 80 70 60 50 40 30 20 10 0 -40 100LFM Natural Convection 400LFM 200LFM 50 60 70 80 90 100 110 TEMPERATURE ° C >> B-40
215D24UFR
### 物料型号 - 型号:200UFR系列

### 器件简介 - 描述:200UFR系列是2瓦特功率模块,旨在提供低输出纹波和宽工作温度范围(-40°C至+85°C),采用低轮廓SIP封装。该系列包含14种型号,输入电压为24V和48V,提供3.3V、5V、12V、15V、±5V、±12V和±15V的稳定输出电压。

### 引脚分配 - 单输出: - 1号引脚:-Vin - 2号引脚:+Vin - 3号引脚:Remote On/Off - 6号引脚:+Vout - 双输出: - 1号引脚:-Vin - 2号引脚:+Vin - 3号引脚:Remote On/Off - 6号引脚:+Vout - 7号引脚:COMMON - 8、9号引脚:NC(无连接)

### 参数特性 - 效率:高达88% - 隔离:1500VDC隔离 - 输入范围:4:1输入范围 - 纹波和噪声:75mVp-p(全负载、全温度、20MHz带宽) - 保护:短路和过流保护 - 远程开/关:支持远程控制

### 功能详解 - 输出特性: - 线压调整率:±0.2%至±0.5% - 负载调整率:+0.75% - 过载保护和短路保护:详见注释1(过载时间应限制在10秒内,温度应维持在85°C以下) - 输入特性: - 24VDC输入型号:9V至36V - 48VDC输入型号:18V至75V - 输入保险丝要求:24VDC型号350mA,48VDC型号135mA - 一般特性: - 开关频率:300kHz - 隔离电压:1500Vmt - 隔离电阻:1000Mohm(500VDC) - 隔离电容:250pF至500pF(100kHz,1Volt)

### 应用信息 - 应用领域:数据通信、移动电池驱动设备、分布式电源电信设备、混合模拟/数字架构、子系统、自动测试仪器和工业机器人系统。

### 封装信息 - 尺寸:1.02 X 0.36 X 0.49英寸(25.95 X 9.25 X 12.45毫米) - 材料:非导电黑色塑料 - 阻燃等级:UL94V-0 - 重量:6.5克
215D24UFR 价格&库存

很抱歉,暂时无法提供与“215D24UFR”相匹配的价格&库存,您可以联系我们找货

免费人工找货