MT4164S4-HR-A

MT4164S4-HR-A (Red Diffused) - STANDARD LEDs 11.3 0.5 RED WIRE ANODE 140.0±5 12.0±1.5 4.8 0.8 2.80±0.5 BLACK WIRE CATHODE TIN PLATING 7.0 6.0 SELECTOR GUIDE Part Number Dice Lens Color / Type Pack Size View Angle 2θ 1/2 MT4164S4-HR-A Orange Red Diffused 5mm Panel Mount 40 ° ELECTRICAL / OPTICAL CHARACTERISTICS AT T A=25°C Parameter Symbol Device Min. Typ. Max. Units Test Conditions Forward Voltage Reverse Current Luminous Intensity Peak Wavelength Dominant Wavelength Spectral Line Half-Width VF IR IV λ peak λD ∆λ 1/2 Orange Orange Orange Orange Orange Orange 33 - 2.1 55 635 626 35 2.6 100 - V μA mcd nm nm nm IF=20mA VR=5V IF=20mA IF=20mA IF=20mA IF=20mA ABSOLUTE MAXIMUM RATINGS AT TA=25°C Parameter Rating Units Forward Current ( IF ) Power Dissipation ( PD ) Reverse Voltage ( VR ) Operating Temperature ( T OPR ) Storage Temperature ( TSTG ) Lead Solder Temperature ( T SOL ) 1. All Dimensions Are In Millimeters (inches). 2. Tolerance Is +-0.25(0.01") Unless Otherwise Noted. 3. Specifications Are Subject To Change Without Notice. 30 78 5 -25 ~ +85 -40 ~ +100 260 °C @ for 5 sec. max mA mW V °C °C Marktech Optoelectronics | 3 Northway Lane North | Latham, NY 12110 | www.marktechopto.com Page 1 of 3 MT4164S4-HR-A (Red Diffused) - STANDARD LEDs Typical Electrical/Optical Characteristic Curves 50 40 30 20 10 50 Relative Luminous Intensity 1.6 2.0 2.4 2.8 3.2 Forward Current IF(mA) 40 30 20 10 0 1.2 0.0 10.0 20.0 30.0 Applied Voltage (V) FORWARD CURRENT VS.APPLIED VOLTAGE Forward Current (mA) FORWARD CURRENT VS. LUMINOUS INTENSITY 0° 50 40 30 20 10 10° 20° 30° Forward Current IF(mA) 40° 1.0 0.9 0.8 20 40 60 Temperature(。C) 80 100 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 0 0.7 FORWARD CURRENT VS. AMBIENT TEMPERATURE RADIATION DIAGRAM Marktech Optoelectronics | 3 Northway Lane North | Latham, NY 12110 | www.marktechopto.com Page 2 of 3 MT4164S4-HR-A (Red Diffused) - STANDARD LEDs Marktech Optoelectronics | 3 Northway Lane North | Latham, NY 12110 | www.marktechopto.com Page 3 of 3