MTG7-001I-XQD00-WW-BDE7

Cree XQ-D White Series on Board Cree XQ-D White Series on Board The XLamp XQ-D LEDs delivers the unique combination of small size, reliability and novel light distribution. This combination of features enable the next generation of designs for applications that require broader light distribution, such as omnidirectional lamps and fixtures. FEATURES > Cree's smallest lighting class: 1.6 x 1.6 x 1.6 mm > Wide viewing angle: 145° > 700 mA maximum drive current FLUX CHARACTERISTICS COLOR Cool White Neutral White Warm White CHARACTERISTICS Viewing angle (FWHM) Thermal Resistance, Junction to Solder Point ESD classification (HBM per Mil-Std-883D) DC forward current Reverse voltage Forward voltage (@ 80 mA, 25 °C) Temperature coefficient of voltage APPLICATIONS > Non-Directional > Distributed > Exterior Area > Landscape CCT (TYP.) MIN.FLUX (LM) @350MA KIT USED 122 6000K LF53 114 4000K BEE5 107 3000K BDE7 UNIT degrees °C/W mA V V mV/°C MINIMUM TYPICAL 145 7.5 Class 1 350 MAXIMUM 3.1 -3 It is highly recommended for the user to review the CREE Series page for additional and most recent technical data at: http://www.cree.com/led-components-and-modules/products/xlamp/discrete-directional/xlamp-xqd Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: info@marktechopto.com 700 -5 3.5 Cree XQ-D White Series on Board * Exceeding maximum ratings may damage the LED and cause potential safety hazards. * Elevated operating temperatures can be expected to negatively impact the service life (lumen output) * All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. * End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are within the absolute maximum ratings. Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 100C/W so that the LED is not exposed to a condition beyond the absolute maximum ratings. Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. Hardware (not included) > Mount with #4 Machine Screws. > 16AWG Maximum Wire Gauge. > Use only with constant current power supplies. PCB Fabrication > Layer Count: 1 > Core Material: 6061-T6 Aluminum > Single Layer Copper Weight: 1oz > Solder Mask: White > Finishing Plating: Pb Free HASL Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: info@marktechopto.com