TLRK1100C

Tentative TL(RK,RMK,SK,OK,YK)1100C(T11) TLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11) TLOK1100C(T11), TLYK1100C(T11) ・本資料は、製品の紹介を目的とした技術検討資料です。最終仕様段階で特性内容 の変更を伴う場合もあります。製品設計を行う場合は、営業部門に最終仕様を ご確認頂けます様お願い致します。 ・This material is technological examination material to aim at the product introduction. The change in the content of the characteristic might be accompanied at the final specification process. The final specification will be able to be gotten in the brokerage department when the product is designed and to get the confirmation. HOL-0206 1 2007-04-19 Tentative TL(RK,RMK,SK,OK,YK)1100C(T11) Preliminary TOSHIBA LED Lamps TLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11), TLOK1100C(T11), TLYK1100C(T11) Panel Circuit Indicator • • • • • • • • • • Surface-mount devices 3.2 (L) × 2.8 (W) × 1.9 (H) mm Flat-top type InGaAℓP LEDs High luminous intensity Low drive current, high-intensity light emission Colors: Red, Orange, Yellow Pb-free reflow soldering is possible Applications: automotive use, message signboards, backlighting etc. Standard embossed tape packing: T11 (2000/reel) 8-mm tape reel Unit: mm Color and Material Product Name TLRK1100C TLRMK1100C TLSK1100C TLOK1100C TLYK1100C Color Red Red Red Orange Yellow InGaAℓP Material JEDEC JEITA TOSHIBA Weight: 0.035 g (typ.) ― ― 4-3R1 HOL-0206 2 2007-04-19 Tentative Maximum Ratings (Ta = 25°C) Product Name TLRK1100C TLRMK1100C TLSK1100C TLOK1100C TLYK1100C 40 4 Forward Current IF (mA) Please see Note 1 Reverse Voltage VR (V) TL(RK,RMK,SK,OK,YK)1100C(T11) Operation Temperature Topr (°C) Storage Temperature Tstg (°C) Power Dissipation PD (mW) 96 −40~100 −40~100 100 Note 1: Forward current derating 50 IF – Ta IF (mA) Allowable forward current 40 30 20 10 0 0 20 40 60 80 100 120 Ambient temperature Ta (°C)) Electrical Characteristics (Ta = 25°C) Product Name Min TLRK1100C TLRMK1100C TLSK1100C TLOK1100C TLYK1100C Unit 1.8 1.8 1.8 1.8 1.9 Forward Voltage VF Typ. 2.1 2.1 2.1 2.1 2.2 V Max 2.4 2.4 2.4 2.4 2.5 mA µA V 20 10 4 IF Reverse Current IR Max VR HOL-0206 3 2007-04-19 Tentative Optical Characteristics–1 (Ta = 25°C) Product Name TLRK1100C TLRMK1100C TLSK1100C TLOK1100C TLYK1100C Unit Luminous Intensity IV Min 100 160 250 250 160 mcd Typ. 300 400 500 500 400 mcd Max 500 800 1250 1250 800 mcd IF 20 20 20 20 20 mA TL(RK,RMK,SK,OK,YK)1100C(T11) Available Iv rank Please see Note 2 RA / SA / TA SA / TA / UA TA / UA / VA TA / UA / VA SA / TA / UA mA Note 2: The specification on the above table is used for Iv classification of LEDs in Toshiba facility. Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned. Luminous Intensity IV Min 100 160 250 400 630 mcd Max 200 320 500 800 1250 mcd Rank RA SA TA UA VA Unit Optical Characteristics–2 (Ta = 25°C) Emission Spectrum Product Name Peak Emission Wavelength λp Min Typ. Max ∆λ Typ. 14 14 14 14 13 nm Dominant Wavelength λd Min 624 620 607 599 583 Typ. 630 626 613 605 590 nm Max 638 634 621 613 595 mA 20 IF TLRK1100C TLRMK1100C TLSK1100C TLOK1100C TLYK1100C Unit ⎯ ⎯ ⎯ ⎯ ⎯ 644 636 623 612 592 nm ⎯ ⎯ ⎯ ⎯ ⎯ The cautions • This product is designed as a general display light source usage, and it has applied the measurement standard that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional application (ex. Light source for sensor, optical communication and etc) except general display light source. HOL-0206 4 2007-04-19 Tentative TLRK1100C IF – V F 100 TL(RK,RMK,SK,OK,YK)1100C(T11) (typ.) IV – IF 1000 500 300 Ta = 25°C (typ.) (mA) 30 IF Luminous intensity 1.8 2.0 2.2 2.4 Forward current IV 10 100 50 30 3 1 1.6 10 1 (mcd) 3 5 10 30 50 100 Forward voltage VF (V) Forward current IF (mA) IV – Tc 10 (typ.) 1.0 Wavelength characteristic IF = 20 mA (typ.) Relative luminous intensity 5 3 Ta = 25°C 0.8 Relative luminous intensity IV 0.6 1 0.5 0.3 0.4 0.2 0.1 −25 0 25 50 75 100 0 580 600 620 640 660 680 700 Case temperature Tc (°C) Wavelength λ (nm) Radiation pattern Ta = 25°C (typ.) 30° 40° 50° 60° 70° 80° 90° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0 0.2 0.4 0.6 0.8 HOL-0206 5 2007-04-19 Tentative TLRMK1100C IF – V F 100 TL(RK,RMK,SK,OK,YK)1100C(T11) (typ.) 1000 500 300 Ta = 25°C IV – IF (typ.) (mA) 30 10 Luminous intensity 1.8 2.0 2.2 2.4 Forward current IV 100 50 30 3 1 1.6 10 1 IF (mcd) 3 5 10 30 50 100 Forward voltage VF (V) Forward current IF (mA) IV – Tc 10 (typ.) 1.0 Wavelength characteristic IF = 20 mA (typ.) IV 5 Ta = 25°C Relative luminous intensity 0 25 50 75 100 Relative luminous intensity 0.8 3 0.6 1 0.5 0.3 0.4 0.2 0.1 −25 0 580 600 620 640 660 680 700 Case temperature Tc (°C) Wavelength λ (nm) Radiation pattern Ta = 25°C (typ.) 30° 40° 50° 60° 70° 80° 90° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0 0.2 0.4 0.6 0.8 HOL-0206 6 2007-04-19 Tentative TLSK1100C IF – V F 100 TL(RK,RMK,SK,OK,YK)1100C(T11) (typ.) 1000 500 300 Ta = 25°C IV – IF (typ.) 30 IF Forward current 10 Luminous intensity 1.8 2.0 2.2 2.4 IV 100 50 30 3 1 1.6 10 1 (mcd) (mA) 3 5 10 30 50 100 Forward voltage VF (V) Forward current IF (mA) IV – Tc 10 (typ.) 1.0 Wavelength characteristic IF = 20 mA (typ.) IV 5 Ta = 25°C Relative luminous intensity 0 25 50 75 100 0.8 Relative luminous intensity 3 0.6 1 0.5 0.3 0.4 0.2 0.1 −25 0 560 580 600 620 640 660 680 Case temperature Tc (°C) Wavelength λ (nm) Radiation pattern Ta = 25°C (typ.) 30° 40° 50° 60° 70° 80° 90° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0 0.2 0.4 0.6 0.8 HOL-0206 7 2007-04-19 Tentative TLOK1100C IF – V F 100 TL(RK,RMK,SK,OK,YK)1100C(T11) (typ.) 1000 Ta = 25°C IV – IF (typ.) (mcd) Luminous intensity 1.8 2.0 2.2 2.4 (mA) 500 300 30 Forward current IF 10 IV 100 50 30 3 1 1.6 10 1 3 5 10 30 50 100 Forward voltage VF (V) Forward current IF (mA) IV – Tc 10 (typ.) Wavelength characteristic 1.0 IF = 20 mA Ta = 25°C (typ.) IV Relative luminous intensity 5 3 0.8 Relative luminous intensity 0.6 1 0.5 0.3 0.4 0.2 0.1 −25 0 25 50 75 100 0 540 560 580 600 620 640 660 Case temperature Tc (°C) Wavelength λ (nm) Radiation pattern Ta = 25°C (typ.) 30° 40° 50° 60° 70° 80° 90° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0 0.2 0.4 0.6 0.8 HOL-0206 8 2007-04-19 Tentative TLYK1100C IF – V F 100 TL(RK,RMK,SK,OK,YK)1100C(T11) (typ.) (mcd) IV – IF 1000 500 300 Ta = 25°C (typ.) (mA) 30 IF Luminous intensity Forward current IV 10 100 50 30 3 1 1.6 10 1 1.8 2.0 2.2 2.4 3 5 10 30 50 100 Forward voltage VF (V) Forward current IF (mA) IV – Tc 10 (typ.) Wavelength characteristic 1.0 IF = 20 mA Ta = 25°C (typ.) IV Relative luminous intensity 5 3 0.8 Relative luminous intensity 0.6 1 0.5 0.3 0.4 0.2 0.1 −25 0 25 50 75 100 0 540 560 580 600 620 640 660 Case temperature Tc (°C) Wavelength λ (nm) Radiation pattern Ta = 25°C (typ.) 30° 40° 50° 60° 70° 80° 90° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 1.0 0 0.2 0.4 0.6 0.8 HOL-0206 9 2007-04-19 Tentative Packaging TL(RK,RMK,SK,OK,YK)1100C(T11) These LED devices are packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air before soldering and they should therefore be stored under the following conditions: 1. This moisture proof bag may be stored unopened within 12 months at the following conditions. Temperature: 5°C~30°C Humidity: 90% (max) 2. After opening the moisture proof bag, the devices should be assembled within 168 hours in an environment of 5°C to 30°C/60% RH or below. 3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to pink) or the expiration date has passed, the devices should be baked in taping with reel. After baking, use the baked devices within 72 hours, but perform baking only once. Baking conditions: 60±5°C, for 12 to 24 hours. Expiration date: 12 months from sealing date, which is imprinted on the same side as this label affixed. 4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting. Furthermore, prevent the devices from being destructed against static electricity for baking of it. 5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not throw or drop the packed devices. Mounting Method Soldering • Reflow soldering (example) Temperature profile for Pb soldering (example) 10 s max (*) 240°C max Package surface temperature (°C) Temperature profile for Pb-free soldering (example) 5 s max(*) 260°C max Package surface temperature (°C) (*) (*) 4°C/s max (*) 140~160°C max(*) 4°C/s max(*) 60~120 s max(*) Time (s) 4°C/s max(*) max(*) 150~180°C 230°C (*) 4°C/s max max(*) 60~120 s Time 30~50s max(*) (s) • • • • The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under the above conditions. Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of opening the package. Second reflow soldering In case of second reflow soldering should be performed within 168 h of the first reflow under the above conditions. Storage conditions before the second reflow soldering: 30°C, 60% RH (max) Make any necessary soldering corrections manually. (only once at each soldering point) Soldering iron : 25 W Temperature : 300°C or less Time : within 3 s If the products need to be performed by other soldering method (ex. wave soldering), please contact Toshiba sales representative. • Recommended soldering pattern 1.65 1.15 1.65 2.41 Unit: mm HOL-0206 10 2007-04-19 Tentative Cleaning TL(RK,RMK,SK,OK,YK)1100C(T11) When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the recommended conditions). In selecting the one for your actual usage, please perform sufficient review on washing condition, using condition and etc. ASAHI CLEAN AK-225AES KAO CLEAN TROUGH 750H PINE ALPHA ST-100S TOSHIBA TECHNOCARE (FRW-17, FRW-1, FRV-100) : (made by ASAHI GLASS) : (made by KAO) : (made by ARAKAWA CHEMICAL) : (made by GE TOSHIBA SILICONES) Precautions when Mounting Do not apply force to the plastic part of the LED under high-temperature conditions. To avoid damaging the LED plastic, do not apply friction using a hard material. When installing the PCB in a product, ensure that the device does not come into contact with other cmponents. Tape Specifications 1. Product number format The type of package used for shipment is denoted by a symbol suffix after the product number. The method of classification is as below. (this method, however does not apply to products whose electrical characteristics differ from standard Toshiba specifications) (1) Tape Type: T11 (4-mm pitch) (2) Example TLYK1100C (T11) Tape type Toshiba product No. 2. Tape dimensions Unit: mm Symbol D E P0 t F D1 Dimension 1.5 1.75 4.0 0.3 3.5 1.5 Tolerance +0.1/−0 ±0.1 ±0.1 ±0.05 ±0.05 ±0.1 Symbol P2 W P A0 B0 K0 Dimension 2.0 8.0 4.0 2.9 3.7 2.3 Tolerance ±0.05 ±0.3 ±0.1 ±0.1 ±0.1 ±0.1 P0 D P2 E F W t K0 B0 Polarity P A0 D1 HOL-0206 11 2007-04-19 Tentative 3. Reel dimensions TL(RK,RMK,SK,OK,YK)1100C(T11) Unit: mm 9 ± 0.3 11.4 ± 1.0 +0 180 −4 2 ± 0.5 4. Leader and trailer sections of tape 40 mm or more (Note 1) 40 mm or more (Note 2) Leading part: 190 mm (min) Note1: Empty trailer section Note2: Empty leader section φ13 φ60 φ44 HOL-0206 12 2007-04-19 Tentative 5. Packing form (1) Packing quantity Reel Carton 2,000 pcs 10,000 pcs TL(RK,RMK,SK,OK,YK)1100C(T11) (2) Packing form: Each reel is sealed in an aluminum pack with silica gel. 6. Label format (1) Example: TLYK1100C (T11) P/N: TYPE ADDC TOSHIBA TLYK1100C (T11) Q’TY 32C 2,000 pcs 2000 Lot Number Key code for TSB (RANK SYMBOL) Use under 5-30degC/60%RH within 168h [[G]]/RoHS COMPATIBLE *Y3804xxxxxxxxxxxxxxxxx* SEAL DATE: DIFFUSED IN ***** ASSEMBLED IN ***** (2) Label location • Reel • Carton Tape feel direction Label position Label position • The aluminum package in which the reel is supplied also has the label attached to center of one side. HOL-0206 13 2007-04-19 Tentative TL(RK,RMK,SK,OK,YK)1100C(T11) RESTRICTIONS ON PRODUCT USE • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. HOL-0206 14 2007-04-19