307-301-22

PANEL INDICATOR LEDs - Ø4.8mm Mounting FEATURES Low profile lens styling Smoked & water clear lens options Flying lead terminations and low current versions available 307 SERIES PACK QUANTITY = 20 PIECES Sealed to IP40 Supplied complete with mounting hardware Product illustrated 307-303-21 Indicator secured to panel with spring steel retaining clip SPECIFICATIONS Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR LENS Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE Vopr CURRENT lopr LUMINOUS lv@20mA WAVE λp OPERATING T opr STORAGE T stg DC DC INTENSITY LENGTH TEMP TEMP STANDARD INTENSITY 307-303-21 307-306-21 307-309-21 307-312-21 Red Orange Yellow Green Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 12 20 20 21 20 120 110 44 120 627 627 590 565 -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 Yes Yes Yes Yes HIGH INTENSITY 307-301-21 307-325-21 307-324-21 307-934-21 307-998-21 307-301-23 307-325-23 307-324-23 307-934-23 307-998-23 UNITS Red Yellow Green Blue Cold White Red Yellow Green Blue Cold White Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 Vdc 20 20 20 20 20 20 20 20 20 20 mA 900 4300 7800 2300 4600 900 4300 7800 2300 4600 mcd 660 590 525 470 *see below 660 590 525 470 *see below nm -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ -0 ~ +85^ 0 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 -0 ~ +85 0 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes C C x y 998 0.296 0.276 *Typical emission colour cold white 0.283 0.330 0.330 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 0.305 0.339 0.318 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. shown. Refer to page 3. Appropriate LED numbers How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS046/07 Issue 1 SAMPLES AVAILABLE Page 1 of 3 307 Series 20.0 20.0 9.0 0.7Sq Ø4.8 Ø6.4 Ø4.7 2.9 MOUNTING HOLE Dimensions in mm (Typical) Not to scale Anode termination indicated by long tag. Mounting hole to be clean an burr free Materials Body Panel Washer T ermination Pins Retaining Clip Fresnel lens Header Nylon 6 Neoprene Tin on Nickel Plated Phosphor Bronze Spring steel Polycarbonate PTFE Push-on Connectors 909-000-00 is gold plated 910-000-00 is tin plated for use with 307 series. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. provides low contact. Dual metal contact design resistance and gas tight electrical Dimensions in mm (Typical) Not to scale Technical Characteristics SERIES POWER MAXIMUM REVERSE MAXIMUM CUTOUT PANEL MOUNTING MINIMUM PANEL MAX. DISSIPATION 307 UNITS 425 mW VOLTAGE 3 Vdc CENTRES 10.0 mm THICKNESS 11.0 mm 4.8 mm Optional Flying Lead Terminations ORDER SUFFIX 13 13 17 17 CODE SUPPLY VOLTAGE WIRE COLOUR WIRE LENGTH NO/DIAMETER CONDUCTORS OF DIAMETER INSULATION OVER COMMENTS DC Products AC Products DC Products AC Products Red-anode / Black-cathode Brown-live / Blue-neutral Red-anode / Black-cathode Brown-live / Blue-neutral 150mm 150mm 1000mm 1000mm Customised available 7/0.2mm 1.2mm lengths Optional Reverse Protection Diode SUFFIX 01 ORDER CODE CIRCUIT COMMENTS Available on all indicators except Bi-Colour devices. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 046/07 Issue 1 SAMPLES AVAILABLE Page 2 of 3 307 Series Part numbers also available in the 307 Series: PART NO. COLOUR VOLTAGE (Vdc) Vopr PART NO. COLOUR VOLTAGE (Vdc) Vopr 307-301-04 307-301-20 307-301-22 307-301-22-15 307-301-22-50 307-301-72 307-303-04 307-303-20 307-303-23 307-303-72 307-306-20 307-306-23 307-309-04 307-309-20 307-309-23 307-309-23-21 307-309-72 307-309-72-50 307-312-04 307-312-20 307-312-21-50 307-312-23 307-312-72 UNITS Red Red Red Red Red Red Red Red Red Red Orange Orange Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green 20mA 5/6Vdc 24Vdc 24Vdc 24Vdc 24Vac 20mA 5/6Vdc 24-28Vdc 24Vac 5/6Vdc 24-28Vdc 20mA 5/6Vdc 24-28Vdc 24-28Vdc 24Vac 24Vac 20mA 5/6Vdc 12Vdc 24-28Vdc 24Vac 307-320-22 307-324-04 307-324-20 307-324-22 307-324-22-15 307-325-04 307-325-20 307-325-22 307-325-22-15 307-325-22-50 307-325-72 307-934-04 307-934-22 307-934-22-50 307-998-04 307-998-22 307-998-22-15 307-998-22-19 307-998-22-50 307-998-22-51 307-998-72 UNITS Blue Green Green Green Green Yellow Yellow Yellow Yellow Yellow Yellow Blue Blue Blue Cold White Cold White Cold White Cold White Cold White Cold White Cold White 24Vdc 20mA 5/6Vdc 24Vdc 24Vdc 20mA 5/6Vdc 24Vdc 24Vdc 24Vdc 24Vac 20mA 24Vdc 24Vdc 20mA 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vac The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. De-rating Information 301, 303, 306 & 309 312 324, 934 & 998 325 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 046/07 Issue 1 SAMPLES AVAILABLE Page 3 of 3