327-502-22

PANEL INDICATOR LEDs - Ø8.0mm Mounting FEATURES 327 SERIES Unobtrusive lens for flush mounting Flying lead terminations and low current versions available PACK QUANTITY = 20 PIECES Sealed to IP40 Supplied complete with mounting hardware Product illustrated 327-501-21 SPECIFICATIONS Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR LENS Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE Vopr CURRENT lopr LUMINOUS lv@20mA WAVE λp OPERATING T opr STORAGE T stg DC DC INTENSITY LENGTH TEMP TEMP HIGH INTENSITY 327-000-21-50 327-000-21-53 327-000-21-55 327-501-21 327-521-21 327-532-21 327-930-21 327-997-21 327-501-23 327-521-23 327-532-23 327-930-23 327-997-23 UNITS Red/Yellow Red/Green Yellow/Green Red Yellow Green Blue Cold White Red Yellow Green Blue Cold White White Diffused White Diffused White Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 Vdc 20 20 20 20 20 20 20 20 20 20 20 20 20 mA 900/4300 900/7800 4300/7800 11000 16000 23000 7000 14000 11000 16000 23000 7000 14000 mcd 660/590 660/525 590/525 643 591 527 470 *see below 643 591 527 470 *see below nm -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ -40 ~ +95^ 0 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +100 0 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes C C x y 997F-C 0.245 0.229 *Typical emission colour cold white 0.361 0.356 0.264 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 0.385 0.351 0.220 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. shown. Refer to page 3. Appropriate LED numbers How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS080/07 Issue 1 SAMPLES AVAILABLE Page 1 of 4 327 Series Colour dot denotes LED colour Common Anode MOUNTING HOLE Dimensions in mm (Typical) Not to scale Anode termination indicated by long tag for single colour, high intensity devices MATERIALS Body Panel Washer T ermination Pins Retaining Clip Fresnel lens Header Nylon 6 Neoprene Tin on Nickel Plated Phosphor Bronze Spring steel Polycarbonate PTFE PUSH-ON CONNECTORS 909-000-00 is gold plated 910-000-00 is tin plated for use with 327 series. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low contact. and gas tight electrical resistance Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES POWER MAXIMUM REVERSE MAXIMUM CUTOUT 8.0 mm PANEL MOUNTING MINIMUM PANEL MIN/MAX. 327 UNITS 625 DISSIPATION 3 VOLTAGE CENTRES 17.0 mm THICKNESS 13.0 mm mW Vdc OPTIONAL FLYING LEAD TERMINATIONS ORDER SUFFIX 13 13 17 17 CODE SUPPLY VOLTAGE WIRE COLOUR WIRE LENGTH NO/DIAMETER CONDUCTORS OF DIAMETER INSULATION OVER COMMENTS DC Products AC Products DC Products AC Products Red-anode / Black-cathode Brown-live / Blue-neutral Red-anode / Black-cathode Brown-live / Blue-neutral 150mm 150mm 1000mm 1000mm Customised available 7/0.2mm 1.2mm lengths PROTECTION DIODE SUFFIX 01 ORDER CODE CIRCUIT COMMENTS Available on all indicators except Bi-Colour devices and when diode test is specified. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 080/07 Issue 1 SAMPLES AVAILABLE Page 2 of 4 Diode Test Facility ORDER CODE SUFFIX 03 05 09 04 TERMINATION CIRCUIT COMMENTS 3 PINS 150mm of flying leads colours as shown 1000mm of flying leads colours as shown 3 PINS TEST POSITIVE Not available LED with Bi-colour 06 10 150mm of flying leads colours as shown 1000mm of flying leads colours as shown TEST NEGATIVE Test Positive Cathode Test Negative Cathode Anode Anode T est Identification Mark T est Identification Mark De-rating Information 505, 511, 532, 930 & 997 512 & 514 521 535 501 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 080/07 Issue 1 SAMPLES AVAILABLE Page 3 of 4 327 Series Part numbers also available in the 327 Series: PART NO. COLOUR VOLTAGE (Vdc) Vopr PART NO. COLOUR VOLTAGE (Vdc) Vopr 327-000-21-51 327-000-21-54 327-000-22-50 327-000-22-51 327-000-22-54 327-000-22-55 327-000-22-61 327-000-22-62 327-000-22-63 327-000-22-64 327-000-22-65 327-501-04 327-501-20-50 327-501-21 327-501-22 327-501-22-50 327-501-22-51 327-501-24 327-501-25 327-501-76-19 327-502-22 327-502-22-02 327-502-22-50 327-502-42 327-502-42-02 327-502-53 327-502-75 327-503-04-21 327-503-22 327-503-24 327-505-04-03 327-509-22 327-509-42 327-511-04-03 UNITS Yellow/Yellow Red/Red Red/Red Red/Yellow Red/Yellow Red/Green Red/Green Red/Red Red/Yellow Yellow/Green Yellow/Green Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Yellow Yellow Green 12Vdc 12Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 24Vdc 20mA 5/6Vdc 12Vdc 24Vdc 24Vdc 24Vdc 48Vdc 110Vdc 230Vac 24Vdc 24Vdc 24Vdc 15Vdc 15Vdc 50Vdc 110Vac 20mA 24Vdc 48Vdc 20mA 24Vdc 15Vdc 20mA 327-512-04 327-512-04-03 327-512-20 327-512-22 327-512-48-50 327-514-48-50 327-521-04 327-521-21 327-521-22 327-521-22-50 327-521-24 327-521-42-50 327-521-60 327-521-75 327-532-04 327-532-20 327-532-22 327-532-22-50 327-532-24 327-532-25 327-532-76-13 327-532-76-19 327-535-22-35 327-930-04 327-930-21 327-930-22 327-930-75 327-997-04 327-997-22 327-997-76-15 327-997-76-50 327-997-76-51 UNITS Green Green Green Green Green Green Yellow Yellow Yellow Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Green Green Green Green Blue Blue Blue Blue White White White White White 20mA 20mA 5/6Vdc 24Vdc 60Vdc 60Vdc 20mA 12Vdc 24Vdc 24Vdc 48Vdc 15Vdc 75Vdc 110Vac 20mA 5/6Vdc 24Vdc 24Vdc 48Vdc 110Vdc 230Vac 230Vac 24Vdc 20mA 12Vdc 24Vdc 110Vac 20mA 24Vdc 230Vac 230Vac 230Vac The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 080/07 Issue 1 SAMPLES AVAILABLE Page 4 of 4