512-997-76

FEATURES PROFESSIONAL LED INDICATORS Ø12.7mm Mounting 512 SERIES PACK QUANTITY = 10 PIECES l Robust bright nickel plated brass housing l Sealed to IP67 l Flying lead terminations available l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 512-501-21 Red Smoked 12 19 11000 643 -40 ~ +95^ -40 ~ +100 Yes 512-521-21 Yellow Smoked 12 19 16000 591 -40 ~ +95^ -40 ~ +100 Yes 512-532-21 Green Smoked 12 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 512-930-21 Blue Smoked 12 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 512-997-21 Cool White Smoked 12 20 14000 * -40 ~ +95^ -40 ~ +100 Yes 512-501-23 Red Smoked 24-28 20 11000 624 -40 ~ +95^ -40 ~ +100 Yes 512-521-23 Yellow Smoked 24-28 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 512-532-23 Green Smoked 24-28 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 512-930-23 Blue Smoked 24-28 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 512-997-23 Cool White Smoked 24-28 20 14000 * -40 ~ +95^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. fig 1 * = Typical emission colour: cool white x=0.31, y=0.32 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ^ = Products must be derated when used above 40°C - Refer to fig 1. Max forward DC current vs ambient How to Order: temperature (Tjmax=105°C) website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 017/07 Issue 1 SAMPLES AVAILABLE Page 1 of 2 512 Series Mounting Hole Dimensions in mm (Typical) Anode termination indicated by red sleeve Mounting hole to be clean and burr free Not to scale MATERIALS Body PUSH-ON CONNECTORS Brass to BS 2874 CZ121 Nickel plated to BS 1224 Nut Brass to BS 2874 CZ121 nickel plated to BS 1224 Panel Seal Viton Termination Brass to BS 2874 CZ108 Copper flash undercoat with silver flash finish Lock Washer Zinc plated steel Fresnel lens Polycarbonate Encapsulation PC5430 resin 925-000-00 is brass tin plated. For use with 512 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 512 MAXIMUM MAXIMUM DISSIPATION VOLTAGE POWER PANEL REVERSE 1000 1000 mw NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 12.7 1.0 x,y=19.5 1.5-8.0 mm Nm mm mm CUTOUT Vdc MOUNTING MOUNTING PANEL OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 017/07 Issue 1 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2