514-111-76

Section 4; Pro LED Ind for pdfs 19/1/00 7:37 pm Page 14 PROFESSIONAL LED INDICATORS - Ø 12 .7mm Mounting • Bright nickel plated brass housing • Robust termination tags accept pushon connectors • AC versions available • Sealed to IP67 514 SERIES Dimensions in mm (Typical) Scale 1:1 MLQ = 10 LEDs Anode termination indicated by red sleeve Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE DC Vopr STANDARD INTENSITY CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE LENGTH λp VIEWING ANGLE OPERATING TEMP Topr STORAGE TEMP Tstg Wide -20~+60 -30~+85 Wide -20~+60 -30~+85 °C °C STANDARD INTENSITY 514-105-04 Red 2.0* 20 90 625 514-111-04 Yellow 2.1* 20 40 590 565 514-114-04 Green 2.2* 20 40 514-105-21 Red 12 20 90 625 514-111-21 Yellow 12 20 40 590 514-114-21 Green 12 20 40 565 Coloured Diffused 514-105-22 Red 24 20 90 625 514-111-22 Yellow 24 20 40 590 514-114-22 Green 24 20 40 565 HIGH INTENSITY 514-102-04 Red 514-102-21 Red 514-102-22 Red Coloured Diffused UNITS 1.9* 20 500 12 20 500 660 660 24 20 500 660 Vdc mA mcd nm * = Voltage DC for 20mA product is Vf@20mA, not Vopr Please note - This product is also available at 24, 28, and 110Vdc, 110 and 230Vac. Indicators supplied at voltages above 75Vdc must be used with insulated terminations or ordered with flying leads to comply with the Low Voltage Directive. Please contact our Sales department for further details. LED PRODUCTS CAN BE STATIC SENSITIVE Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 • email: sales@marl.co.uk • website: www.marl.co.uk • website: www.marl-leds.com