524-997-22

524 series features Industrial LED Indicator - Ø 8.1mm mounting Robust stainless steel housing Low profile styling and Wide viewing angle Sunlight readable LEDs Sealed to IP67 Colour diffused lens Suitable for high vibration applications Internal reverse protection diode fitted as standard Pack quantity = 10 pieces specifications Typical characteristics (Ta = 25°C) Voltage DC (Vdc) Vopr Current DC (mA) Iopr Luminous Intensity (mcd) Iv at 20mA Wave Length (nm) λp 524-501-21 Red 12 20 600 630 -40 ~ +80^ -40 ~ +100 D 524-521-21 Yellow 12 20 600 585 -40 ~ +80^ -40 ~ +100 D 524-532-21 Green 12 20 800 515 -40 ~ +80^ -40 ~ +100 F 524-930-21 Blue 12 20 400 465 -40 ~ +80^ -40 ~ +100 F 524-997-21 Cool White 12 20 1200 * -40 ~ +80^ -40 ~ +100 F 524-501-23 Red 24 - 28 20 600 630 -40 ~ +80^ -40 ~ +100 D 524-521-23 Yellow 24 - 28 20 600 585 -40 ~ +80^ -40 ~ +100 D 524-532-23 Green 24 - 28 20 800 515 -40 ~ +80^ -40 ~ +100 F 524-930-23 Blue 24 - 28 20 400 465 -40 ~ +80^ -40 ~ +100 F 524-997-23 Cool White 24 - 28 20 1200 * -40 ~ +80^ -40 ~ +100 F Colour Operating Temp. (°C) Topr Storage Temp. (°C) Tstg De-rating Graphs high intensity ^ = Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs, refer to graphs on page 3. 997 *Typical Emission Colour Cool White x 0.31 y 0.32 Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited ds: 059/ 10 issue 5 BS EN ISO 9001:2008 approved manufacturer page 1 of 4 industrial panel lamps Part Number 524 series technical data Mounting Hole Sleeve Anode termination indicated by red sleeve Mounting hole to be clean and burr free Dimensions in mm (typical) Not to scale housing material Body Nut Panel Seal Termination Lock Washer Fresnel Lens Encapsulation push on connectors Stainless Steel grade 303 Stainless Steel grade 303 Viton Brass to BS 2874 CZ108 Copper flash undercoat with silver flash finish Stainless Steel Polycarbonate PC5430 Resin 925-000-00 is Brass Tin Plated. For use with 524 Series Lamps Dimensions in mm (typical) Not to scale. technical characteristics Max. Power Dissipation Max. Reverse Voltage 524 825 units mW Series Panel Cutout Nut Mounting Torque Min. Mounting Centres Max. Panel Thickness 1000 8.1 0.65 x, y = 14.5 1.5 - 13.0 Vdc mm Nm mm mm optional flying lead terminators Order Code Suffix 15 15 19 19 Supply Voltage DC products AC products DC products AC products Wire Colour Red-anode/ Black-cathode Brown-live/ Blue-neutral Red-anode/ Black-cathode Brown-live/ Blue-neutral Wire Length 150mm 150mm 1000mm 1000mm No/Diameter of Conductor 19/ 0.15mm Diameter Insulation 1.2mm Comments Customised lengths available to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited ds: 059/ 10 issue 5 BS EN ISO 9001:2008 approved manufacturer page 2 of 4 524 series de-rating information Derating Graph F 55 50 50 45 45 Forward Current IF (mA) Forward Current IF (mA) Derating Graph D 55 40 35 30 25 20 15 10 40 35 30 25 20 15 10 5 0 0.0 5 20.0 40.0 60.0 80.0 100.0 Ambient Temperature Ta (°C) 0 0.0 20.0 40.0 60.0 80.0 100.0 Ambient Temperature Ta (°C) design considerations Electro-Static Discharge (ESD) Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015. Power De-Rating The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated voltage. to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited ds: 059/ 10 issue 5 BS EN ISO 9001:2008 approved manufacturer page 3 of 4 524 series also available Part numbers also available in the 524 series: Part Number Colour Voltage DC (Vdc) Vopr 524-532-20-19 Green 5/6Vdc 524-532-20-22 Green 5/6Vdc 524-501-04 Red *20mA 524-532-21-22 Green 12Vdc 524-501-04-15 Red *20mA 524-532-22 Green 24Vdc 524-501-20 Red 5/6Vdc 524-532-22-15 Green 24Vdc 524-501-20-19 Red 5/6Vdc 524-532-22-22 Green 24Vdc 524-501-20-22 Red 5/6Vdc 524-532-24 Green 48Vdc 524-501-21-15 Red 12Vdc 524-532-24-19 Green 48Vdc 524-501-22 Red 24Vdc 524-532-24-22 Green 48Vdc 524-501-22-22 Red 24Vdc 524-532-25 110Vdc 524-501-24 Red 48Vdc 524-532-72-15 Green 24Vac 524-501-24-19 Red 48Vdc 524-532-75-15 Green 110Vac 524-501-25 Red 110Vdc 524-532-76-15 Green 230Vac 524-501-75-15 Red 110Vac 524-532-86 Green 115Vac 524-501-76-15 Red 230Vac 524-532-86-22 Green 115Vac 524-501-86-19 Red 115Vac 524-930-04 Blue *20mA 524-512-04 Green *20mA 524-930-04-15 Blue *20mA 524-512-21 Green 12Vdc 524-930-04-50 Blue *20mA 524-512-24 Green 48Vdc 524-930-20 Blue 5/6Vdc 524-512-86 Green 115Vac 524-930-21-15 Blue 12Vdc 524-521-04 Yellow *20mA 524-930-21-19 Blue 12Vdc 524-521-04-15 Yellow *20mA 524-930-22 Blue 24Vdc 524-521-20 Yellow 5/6Vdc 524-930-24 Blue 48Vdc 524-521-20-19 Yellow 5/6Vdc 524-930-25 Blue 110Vdc 524-521-20-22 Yellow 5/6Vdc 524-997-04 White *20mA 524-521-21-15 Yellow 12Vdc 524-997-04-15 White *20mA 524-521-22 Yellow 24Vdc 524-997-21-15 White 12Vdc 524-521-22-22 Yellow 24Vdc 524-997-22 White 24Vdc 524-521-24-22 Yellow 48Vdc 524-997-22-22 White 24Vdc 524-523-23 Red 28Vdc 524-997-24 White 48Vdc 524-525-23 Green 28Vdc 524-997-24-22 White 48Vdc 524-530-04-50 Red/ Green *20mA 524-997-72 24Vac 524-530-20 524-997-86-22 White Red/ Green 5/6Vdc 524-530-21-15 Red/ Green 12Vdc 524-530-23 Red/ Green 28Vdc 524-532-04 Green *20mA 524-532-04-15 Green *20mA 524-532-20 Green 5/6Vdc 524-532-20-15 Green 5/6Vdc Green White 115Vac The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. * = These products do not contain an integral resistor. to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales@marl.co.uk w: www.leds.co.uk © marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited ds: 059/ 10 issue 5 BS EN ISO 9001:2008 approved manufacturer page 4 of 4