532-102-63

FEATURES PROFESSIONAL LED INDICATORS Ø12.7mm Mounting 532 SERIES l Each product will operate over a wide voltage input range PACK QUANTITY = 10 PIECES l Robust stainless steel housing l 180° viewing angle l Full internal potting to resist shock and vibration l Sealed to IP67 l Fitted with an internal diode to provide reverse voltage protection to 1000Vdc SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 532-102-63 Red (GaAlAs) Colour Diffused 12-28 8-20 450 660 -40 ~ +85^ -40 ~ +85 Yes 532-111-63 Yellow Colour Diffused 12-28 8-20 50 590 -40 ~ +85^ -40 ~ +85 Yes 532-114-63 Green Colour Diffused 12-28 8-20 60 565 -40 ~ +85^ -40 ~ +85 Yes 532-102-75 Red (GaAlAs) Colour Diffused 110Vac 6 450 660 -40 ~ +85^ -40 ~ +85 Yes 532-111-75 Yellow Colour Diffused 110Vac 6 50 590 -40 ~ +85^ -40 ~ +85 Yes 532-114-75 Green Colour Diffused 110Vac 6 60 565 -40 ~ +85^ -40 ~ +85 Yes Vdc mA mcd nm °C °C UNITS 102,111 & 114 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 070/07 Issue 1 SAMPLES AVAILABLE Page 1 of 2 532 Series All other voltages 20mA to 48Vac/dc Mounting Hole Dimensions in mm (Typical) Anode termination indicated by red sleeve Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Stainless steel grade 316 Nut Stainless steel grade 316 Panel Seal Viton Termination Copper with silver flash finish Lock Washer Stainless steel Fresnel lens Polycarbonate Encapsulation PC5430 resin Header Nylon 6 A82 925-000-00 is brass tin plated. For use with 532 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM PANEL POWER CUTOUT DISSIPATION MOUNTING TORQUE MINIMUM MIN/MAX. CENTRES THICKNESS MOUNTING PANEL 532 825 12.7 1.0 X,Y=19.5 1.5-8.0 UNITS mw mm Nm mm mm How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 070/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2