604-998-23

604 SERIES PANEL INDICATOR LED Marl Part Number LED Colour 604-301-04 604-325-04 604-324-04 604-934-04 604-998-04 604-301-20 604-325-20 604-324-20 604-934-20 604-998-20 604-301-21 604-325-21 604-324-21 604-934-21 604-998-21 604-301-23 604-325-23 604-324-23 604-934-23 604-998-23 604-301-24 604-325-24 604-324-24 604-934-24 604-998-24 Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White FEATURES BENEFITS • • • • • • • • • • • • • • • • • • Ø5.0mm mounting Nickel plated brass housing Sealed to IP67 - weatherproof Wide viewing angle - flat smoked lens Internal potting 150mm flying leads as standard Range of LED colour options Range of voltage options Our smallest mounting size in a metallic housing Suitable for industrial applications Suitable for external applications Smoked lens gives good on/off contrast ratio Suitable for high vibration applications Rapid installation Suitable for status panel indication Manufactured with internal resistor Outstanding reliability Vandal resistant Typical Voltage DC Vopr Typical Current DC Iopr Typical LED Luminous Intensity Typical LED Wavelength λp Operating Temp Topr * Storage Temp Tstg 1.85 ** 2.0 ** 3.2 ** 3.2 ** 3.2 ** 5-6 5-6 5-6 5-6 5-6 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 48 48 48 48 48 Vdc 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 12 12 12 12 12 mA 33 401 1010 225 1194 33 401 1010 225 1194 33 401 1010 225 1194 27 308 830 175 932 18 208 615 125 648 mcd 640 590 525 471 See Below 640 590 525 471 See Below 640 590 525 471 See Below 640 590 525 471 See Below 640 590 525 471 See Below nm -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 -40 to +75 °C -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 -40 to +100 °C Typical Emission Colours Cool White LED X 0.292 0.285 0.330 0.330 Y 0.286 0.300 0.350 0.329 NOTES Intensities (lv) and colour shades of white (X-Y co-ordinates) may vary between LEDs within a batch. Additional LED Colours, Voltage Options and Flying Lead lengths available for semicustom projects. Please contact our Sales Team. All LED components are supplied in anti-static packaging. * For operating temperature derating graphs, please refer to sheet 2. ** These are Current models and the voltage shown is Vf at 20mA, not Vopr. To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E sales@marl.co.uk | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited Q 05480 DSN 604 Version 2014-09-25-095300. Page 1 of 2 604 SERIES PANEL INDICATOR LED TECHNICAL CHARACTERISTICS Series Max. Power Dissipation Max. Reverse Voltage Panel Cutout Nut Mounting Torque Min. Mounting Centres Min - Max. Panel Thickness 604 425 5 5.0 0.35 10.0 1.5 - 8.0 mW Vdc mm Nm mm mm TECHNICAL DRAWING Weight (g): 4.9 Dimensions in mm (typical). Not to scale. Mounting hole to be clean and burr free. Anode termination indicated by red flying lead. 0 +0 .1 RED LEAD +VE 15.2 150 5 2.5 7.9 5.1 5 BLACK LEAD -VE Mounting Hole 30 20 10 0 40 30 20 10 0 20 40 60 80 Ambient Temperature Ta (°C) 100 0 50 Blue / Green LED Forward Current If (mA) 40 Yellow LED 50 Forward Current If (mA) Red LED 50 Forward Current If (mA) Forward Current If (mA) DE-RATING GRAPHS 40 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 0 0 Cool White LED 40 30 20 10 8.5 0 50 8.5 20 40 60 80 Ambient Temperature Ta (°C) 100 0 0 20 40 60 80 100 Ambient Temperature Ta (°C) MATERIALS Body Nut Panel Seal Fresnel Lens Encapsulation Lock Washer Termination Bright Nickel Plated Brass Bright Nickel Plated Brass Viton Polycarbonate Black Polyurethane Beryllium Copper Defence Standard 61/12, Part 18 chemical & flame retardant 150mm colour coded flying leads DESIGN CONSIDERATIONS Electro-Static Discharge (ESD) Build up of electro-static discharge occurs in many situations involving people moving and handling products.The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015. it is operated. Therefore, care must be taken to operate the LED at the correct voltage / current values, depending upon the ambient temperature. Marl should be contacted if the device is to be operated outside the temperature range specified. Marl accept no liability for any product that is operated outside the stated voltage or temperature range. Voltage, Current and Temperature The forward voltage / current value of an LED is dependent upon the ambient temperature of the environment in which To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E sales@marl.co.uk | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited Q 05480 DSN 604 Version 2014-09-25-095300. Page 2 of 2