612-330-23

612 SERIES PANEL INDICATOR LED FEATURES • • • • • • • Marl Part Number 612-301-04 612-325-04 612-324-04 612-330-04 612-338-04-15 612-934-04 612-998-04 612-301-20 612-325-20 612-324-20 612-330-20 612-934-20 612-998-20 612-301-21 612-325-21 612-324-21 612-330-21 612-934-21 612-998-21 612-301-23 612-325-23 612-324-23 612-330-23 612-934-23 612-998-23 LED Colour Red Yellow Green Red/Green Bi-Colour Red/Green/Amber Tri-Colour † Blue Cool White Red Yellow Green Red/Green Bi-Colour Blue Cool White Red Yellow Green Red/Green Bi-Colour Blue Cool White Red Yellow Green Red/Green Bi-Colour Blue Cool White Typical Emission Colours Cool White LED X 0.296 0.283 Y 0.276 0.305 Ø6.35mm mounting Black anodised aluminium housing Sealed to IP67 - weatherproof Wide viewing angle - smoked lens Internal potting Range of LED colour options Range of voltage options Typical Voltage Max. Reverse DC Vopr Voltage 1.85 ** 2.0 ** 3.2 ** 2.0/2.2 ** 2.0/2.2 ** 3.2 ** 3.2 ** 5-6 5-6 5-6 5-6 5-6 5-6 12 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 24-28 Vdc 0.330 0.360 3 3 3 3 3 3 3 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 Vdc 612-301-04-19 Wire Length 150mm 1000mm • • • • • • • • • Typical Current DC Iopr 20 20 20 20 20 20 20 19 18 16 20 20 16 18 18 19 20 19 18 17 @ 28V 17 @ 28V 16 @ 28V 17 @ 28V 14 @ 28V 14 @ 28V mA Typical LED Luminous Intensity 33 401 1010 20 30/40 225 1194 33 401 830 20 225 932 33 401 1010 20 225 1194 27 308 830 20 @ 20mA 175 932 mcd Standard industrial mounting size Suitable for portable equipment Suitable for external applications Smoked lens gives good on/off contrast ratio Suitable for high vibration applications Suitable for status panel indication Manufactured with internal resistor Outstanding reliability Vandal resistant Typical LED Wavelength λp 660 590 525 627/565 627/565 465 See Below 660 590 525 627/565 465 See Below 660 590 525 627/565 465 See Below 660 590 525 627/565 465 See Below nm Operating Temp Topr * -40 to +85 -40 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 °C Storage Temp Tstg -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 °C 0.330 0.318 OPTIONAL FLYING LEAD TERMINATORS Marl Part No Suffix 612-301-04-15 BENEFITS Wire Colour Red - Anode Black - Cathode No/Diameter of Conductors 19/0.16mm Diameter of Insulation Wire Specification Type 44, 22 Gauge High Performance Wire 1.2mm NOTES Intensities (lv) and colour shades of white (X-Y co-ordinates) may vary between LEDs within a batch. Additional LED Colours, Voltage Options and Flying Lead lengths available for semicustom projects. Please contact our Sales Team. All LED components are supplied in anti-static packaging. † Tri-Colour model has 3x 150mm flying leads (Anode Red, Anode Green and Common Cathode). Amber is generated by powering Red and Green simultaneously. * LED Characteristics stated at Ta = 25°C. For operating temperature derating graphs, please refer to sheet 2. ** These are Current models and the voltage shown is Vf at 20mA, not Vopr. Additionally, there is no reverse protection diode in Current models. To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E sales@marl.co.uk | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited Q 05480 DSN 612 Version DS003/2017. Page 1 of 2 612 SERIES PANEL INDICATOR LED TECHNICAL CHARACTERISTICS Series 612 Max. Power Dissipation Panel Cutout Nut Mounting Torque Min. Mounting Centres Min. - Max. Panel Thickness mW mm Nm mm mm 500 6.35 0.6 11.0 1.5 - 7.0 TECHNICAL DRAWING Weight (g): 5 Dimensions in mm (typical). Not to scale. Mounting hole to be clean and burr free. Anode termination denoted by long pin. Tri-colour model uses 3x 150mm flying leads instead of pins: Red = Red Anode, Green = Green Anode, Black = Common Cathode. 6.35 2.54 10 + 0.1 0 PUSH ON CONNECTOR 11.8 9 5.1 15 0.65 Sq 2.5 909-000-00 is gold plated, 910-000-00 is tin plated - for use with 612 series lamps. Dimensions in mm (typical). Not to scale. Mounting Hole 30 20 40 30 20 Cool White LED 50 40 30 20 50 30 10 10 0 0 0 0 0 20 40 60 80 100 50 8.5 0 20 40 60 80 100 Ambient Temperature Ta (°C) 0 20 40 60 80 100 Ambient Temperature Ta (°C) R 20 10 8.5 Red+Green Bi-Colour LED 40 10 Ambient Temperature Ta (°C) Forward Current If (mA) Blue / Green LED Forward Current If (mA) 40 50 Forward Current If (mA) Red / Yellow LED 50 Forward Current If (mA) Forward Current If (mA) DE-RATING GRAPHS G 7.5 5 0 20 40 60 80 100 Ambient Temperature Ta (°C) Red+Green Tri-Colour LED 40 30 R 20 G 10 0 0 20 40 60 80 100 Ambient Temperature Ta (°C) MATERIALS Body Nut Panel Seal Black Anodised Aluminium Nickel Plated Brass Viton Lens Encapsulation Polycarbonate Black Polyurethane Lock Washer Termination Spring Steel Silver Flash Coated Brass DESIGN CONSIDERATIONS Electro-Static Discharge (ESD) Build up of electro-static discharge occurs in many situations involving people moving and handling products.The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015. Voltage, Current and Temperature The forward voltage / current value of an LED is dependent upon the ambient temperature of the environment in which To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E sales@marl.co.uk | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited it is operated. Therefore, care must be taken to operate the LED at the correct voltage / current values, depending upon the ambient temperature. Marl should be contacted if the device is to be operated outside the temperature range specified. Marl accept no liability for any product that is operated outside the stated voltage or temperature range. Q 05480 DSN 612 Version DS003/2017. Page 2 of 2