614-530-04

PROFESSIONAL LED INDICATORS Ø8.1mm Mounting FEATURES Black anodised aluminium housing 614 SERIES Bi-colour PACK QUANTITY = 10 PIECES Sealed to IP67 Flying lead terminations available on the Bi-colour Dual state LED indicator saves panel space and reduces assembly time. SPECIFICATION Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS DC (Vdc) Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH λp (nm) TEMP T opr TEMP T stg BI-COLOUR STANDARD INTENSITY 614-530-04 614-530-20 614-530-21 614-530-23 UNITS Red/Green Red/Green Red/Green Red/Green Water Clear Water Clear Water Clear Water Clear 2.0/2.2 5/6 12 24-28 Vdc 20 15/20 20 20 mA 30/20 30/20 30/20 30/20 mcd 627/565 627/565 627/565 627/565 nm -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ °C -50 ~ +100 -50 ~ +100 -50 ~ +100 -50 ~ +100 °C Fig 1 Yes Yes Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information Refer to Fig 1 530 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 042/06 Issue 2 SAMPLES AVAILABLE Page 1 of 2 614 Series MOUNTING HOLE Dimensions in mm (Typical) Not to scale Anode termination indicated by long pin. Mounting hole to be clean and burr free. MATERIALS Body Nut Panel Seal T ermination T ags Lens Encapsulation Lock Washer Black Anodised Aluminium Bright Nickel Plated Brass Viton Tin Plated Phosphor Bronze Polycarbonate PC5430 Resin Spring Steel PUSH-ON CONNECTORS 909-000-00 is gold plated. 910-000-00 is tin plated series lamps. For use with 614 (Bi-colour) Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM DISSIPATION 614 UNITS 700 mW POWER PANEL MOUNTING TORQUE MINIMUM MIN/MAX. PANEL THICKNESS CUTOUT MOUNTING CENTRES 8.1 mm 0.6 Nm x,y = 14.5 mm 1.5-13.0 mm OPTIONAL FLYING LEAD TERMINATIONS ORDER SUFFIX CODE SUPPLY WIRE WIRE NO/DIAMETER CONDUCTORS OF DIAMETER INSULATION OVER COMMENTS VOLTAGE COLOUR LENGTH 15 19 DC Products DC Products Red-anode / Black-cathode Red-anode / Black-cathode 150mm 1000mm 19/0.15mm 1.2mm lengths Customised available website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 042/06 Issue 2 Page 2 of 2