614-535-21-35

PROFESSIONAL LED INDICATORS Ø8.1mm Mounting FEATURES Black anodised aluminium housing Sealed to IP67 Common anode version available Colour coded flying lead terminations Internal reverse protection diode fitted as standard in all voltage models. This product is configured to work as a three colour option LED. Red, Green and Amber 614 SERIES Tri-colour PACK QUANTITY = 10 PIECES SPECIFICATION Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS DC (Vdc) Vopr VOLTAGE DC (mA) lopr CURRENT INTENSITY LUMINOUS lv@20mA (mcd) LENGTH λp (nm) WAVE TEMP T opr OPERATING TEMP T stg STORAGE TRI-COLOUR STANDARD INTENSITY 614-535-04-35 614-535-20-35 614-535-21-35 614-535-22-35 UNITS Red/Green Red/Green Red/Green Red/Green Water Clear Water Clear Water Clear Water Clear 2.0/2.2* 5/6 12 24 Vdc 20/10 20/10 19/9 13/7 mA 5/5 5/5 5/5 5/5 mcd 627/565 627/565 627/565 627/565 nm -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ °C -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 °C Yes Yes Yes Yes Please note there are two LED die built into these units allowing the colour options as detailed above. Please contact our sales department for further details of other available options. * = Voltage DC for 20mA product if Vf@20mA, not Vopr. ^ = Products must be de-rated according to the derating information. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 BS EN ISO 9001:2000 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer © MARL INTERNATIONAL LTD 2008 : DS 072/07 Issue 2 SAMPLES AVAILABLE Page 1 of 2 614 Series MOUNTING HOLE Dimensions in mm (Typical) Not to scale Red wire denotes red anode, green wire denotes green anode. Centre wire is common cathode black. MATERIALS Body Nut Panel Seal Lens Encapsulation Lock Washer Black Anodised Aluminium Bright Nickel Plated Brass Viton Polycarbonate PC5430 Resin Spring Steel CIRCUIT DIAGRAM TECHNICAL CHARACTERISTICS SERIES MAXIMUM DISSIPATION 614 UNITS 700 mW POWER PANEL NUT MINIMUM MIN/MAX. THICKNESS 1.5-13.0 mm PANEL CUTOUT TORQUE 0.6 Nm MOUNTING CENTRES x,y = 14.5 mm MOUNTING 8.1 Vdc CONNECTION OPTIONS • Red LED option - Red wire termination anode • Green LED option - Green wire termination anode • Amber LED option - Red and Green wire termination anode • Black wire termination cathode website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2008 : DS 072/07 Issue 2 SAMPLES AVAILABLE Page 2 of 2