651-111-23

PROFESSIONAL LED INDICATORS Ø12.7mm Mounting FEATURES Black anodised aluminium housing 651 SERIES PACK QUANTITY = 10 PIECES Excellent wide viewing angle characteristics Sealed to IP67 Suitable for high vibration applications Internal reverse protection diode fitted as standard in all voltage models SPECIFICATION Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS DC (Vdc) Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH λp (nm) TEMP T opr TEMP T stg STANDARD INTENSITY 651-105-21 651-111-21 651-114-21 651-105-23 651-111-23 651-114-23 Red Yellow Green Red Yellow Green Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 24-28 24-28 24-28 20 20 20 20 20 20 100 50 60 100 50 60 627 590 565 627 590 565 -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 Yes Yes Yes Yes Yes Yes HIGH INTENSITY 651-102-21 651-102-23 UNITS Red Red Colour Diffused Colour Diffused 12 24-28 Vdc 19 19 mA 450 450 mcd 660 660 nm -40 ~ +85^ -40 ~ +85^ °C -40 ~ +85 -40 ~ +85 °C Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information - Refer to Fig 1 Fig 1 105,111,114 & 102 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 044/06 Issue 2 SAMPLES AVAILABLE Page 1 of 2 651 Series MOUNTING HOLE Dimensions in mm (Typical) Not to scale Anode termination indicated by red sleeve Mounting hole to be cleaned and burr free MATERIALS Body Nut Panel Seal T ermination T ags Fresnel lens Encapsulation Lock Washer Black Anodised Aluminium Black Anodised Aluminium Viton Silver Flash Coated Brass Epoxy PC5430 resin Spring Steel PUSH-ON CONNECTORS 925-000-00 is brass tin plated. For use with 651 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM DISSIPATION 651 UNITS 1000 mw POWER MAXIMUM VOLTAGE 3* / 1000• Vdc REVERSE PANEL NUT MINIMUM MIN/MAX. THICKNESS 1.5-8.0 mm PANEL CUTOUT TORQUE 1.0 Nm MOUNTING CENTRES x,y = 19.5 mm MOUNTING 12.7 mm * = Current Version • = Voltage Version OPTIONAL FLYING LEAD TERMINATIONS ORDER SUFFIX 15 15 19 19 CODE SUPPLY WIRE WIRE NO/DIAMETER CONDUCTORS OF DIAMETER INSULATION OVER COMMENTS VOLTAGE COLOUR LENGTH DC Products AC Products DC Products AC Products Red-anode / Black-cathode Brown-live / Blue-neutral Red-anode / Black-cathode Brown-live / Blue-neutral 150mm 150mm 1000mm 1000mm Customised available 19/0.15mm 1.2mm lengths website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 044/06 Issue 2 Page 2 of 2