671-289-87-50

PROFESSIONAL LED INDICATORS Ø25.4mm Mounting FEATURES 671 SERIES PACK QUANTITY = 1 PIECE Black anodised aluminium housing Bi-Polar product fitted with a bridge rectifier for true AC/DC operation Sealed to IP67 Large LED indication Specially designed mounting kit to allow 32mm mounting SPECIFICATION Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS AC/DC Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH λp (nm) TEMP T opr TEMP T stg HIGH INTENSITY 671-289-87-50 671-293-87-50 671-292-87-50 671-294-87-50 671-295-87-50 671-295-91-50 UNITS 295 *Typical emission colour cold white 0.391 0.380 0.280 Red Yellow Green Blue Cold White Cold White Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 130 130 130 130 130 230 Vac/dc 17 17 17 17 17 10 mA 400 821 200 19 890 890 mcd 660 588 568 470 * * nm -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ °C -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 °C Yes Yes Yes Yes Yes Yes x y 0.248 0.286 0.436 0.381 0.284 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 289,293,294 & 295 292 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 013/07 Issue 1 SAMPLES AVAILABLE Page 1 of 2 671 Series Mounting Hole Dimensions in mm (Typical) Not to scale Mounting hole to be clean and burr free MATERIALS Body Nut Panel Seal T erminations Lens Encapsulation Header Lock Washer Black Anodised Aluminium Aluminium Neoprene Zinc Plated Steel Epoxy PC5430 Resin Nylon 66 Spring Steel MOUNTING KIT Part number: 949-000-00 32mm mounting kit and washer which increases the overall mounting diameter of either 671 or 672 series. TECHNICAL CHARACTERISTICS SERIES MAXIMUM DISSIPATION 671 UNITS 2500 mw POWER PANEL NUT MINIMUM MIN/MAX. THICKNESS 2.0-10.0 mm PANEL CUTOUT TORQUE 1.2 Nm MOUNTING CENTRES x,y = 41.0 mm MOUNTING 25.4 website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply BS EN ISO 9001:2000 Approved Manufacturer © MARL INTERNATIONAL LTD 2007 : DS 013/07 Issue 1 Page 2 of 2