696-998-21

PROFESSIONAL LED INDICATORS Ø6.1mm Mounting FEATURES Black anodised aluminium housing 696 SERIES PACK QUANTITY = 10 PIECES Counter sunk mounting for flush styling Sealed to IP67 Wide viewing angle Vandal resistant Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical T echnical Characteristics (T a = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE LENS DC (Vdc) Vopr DC (mA) lopr INTENSITY lv@20mA (mcd) LENGTH λp (nm) TEMP T opr TEMP T stg HIGH INTENSITY 696-301-21 696-325-21 696-324-21 696-934-21 696-998-21 696-301-23 696-325-23 696-324-23 696-934-23 696-998-23 UNITS Red Yellow Green Blue Cool White Red Yellow Green Blue Cool White Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused Colour Diffused 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 Vdc 20 20 20 20 20 20 20 20 20 20 mA 900 4300 7800 2300 4600 900 4300 7800 2300 4600 mcd 660 590 525 470 see below 660 590 525 470 see below nm -40 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ -40 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ -30 ~ +85^ °C -40 ~ +85 -40 ~ +120 -40 ~ +100 -40 ~ +100 -40 ~ +100 -40 ~ +85 -40 ~ +120 -40 ~ +100 -40 ~ +100 -40 ~ +100 °C Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. x y 998 0.296 0.276 *Typical emission colour cool white 0.283 0.330 0.330 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 0.305 0.339 0.318 How to Order: website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 055/06 Issue 2 SAMPLES AVAILABLE Page 1 of 3 696 Series Panel seal Sealing ring Panel and Mounting Hole Dimensions in mm (Typical) Not to scale * Min/max panel thickness is 3mm / 6.5mm Anode termination indicated by long pin Mounting hole to be clean and burr free MATERIALS Body Nut Sealing Ring T ermination Lock Washer Fresnel lens Encapsulation Black Anodised Aluminium Black Anodised Aluminium Black Anodised Aluminium Tin Plated Phosphor Bronze Stainless steel Polycarbonate PC5430 resin PUSH-ON CONNECTORS 909-000-00 is gold plated 910-000-00 is tin plated For use with 696 series lamps Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM DISSIPATION POWER MAXIMUM VOLTAGE 1000 REVERSE PANEL NUT MINIMUM MIN/MAX. THICKNESS PANEL CUTOUT 696 500 mw 6.1 mm 0.65 Nm TORQUE MOUNTING x,y = 15.0 mm CENTRES MOUNTING 3.0-6.5 mm Vdc OPTIONAL FLYING LEAD TERMINATIONS ORDER SUFFIX 15 15 19 19 CODE SUPPLY WIRE WIRE NO/DIAMETER CONDUCTORS OF DIAMETER INSULATION OVER COMMENTS VOLTAGE COLOUR LENGTH DC Products AC Products DC Products AC Products Red-anode / Black-cathode Brown-live / Blue-neutral Red-anode / Black-cathode Brown-live / Blue-neutral 150mm 150mm 1000mm 1000mm Customised available 19/0.15mm 1.2mm lengths website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 055/06 Issue 2 Page 2 of 3 DERATING INFORMATION 301 325 324, 934 & 998 website: www.marl.co.uk • email: sales@marl.co.uk • • T elephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 relating to either products or service. for products or service. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer BS EN ISO 9001:2000 © MARL INTERNATIONAL LTD 2007 : DS 055/06 Issue 2 Page 3 of 3