BPAK0058E015B01

DATASHEET ® 1 5V POWER AND ENERGY SERIES ULTRACAPACITOR PACKS BPAK0052 P015 B01 BPAK0052 P015 B02 BPAK0058 E015 B01 BPAK0058 E015 B02 FEATURES AND BENEFITS • 15 V working voltage • Individually balanced cells • Rugged, fully enclosed system • Screw terminals • Module-to-module balance cable included • UL Recognized APPLICATIONS • Automotive subsystems • Consumer electronics • Portable power tools • Renewable energy systems • Short term UPs and telecom PRODUCT SPECIFICATIONS CAPACITANCE Nominal capacitance Tolerance capacitance VOLTAGE Rated voltage Surge voltage Maximum operating voltage Isolation voltage RESISTANCE ESR, DC Resistance tolerance Thermal resistance (Rth) TEMPERATURE Operating temperature range Storage temperature range Temperature characteristics Capacitance change Internal resistance change POWER Pd Pmax ENERGY Emax LIFESPAN Endurance After 1,000 hours application of rated voltage at 65°C. BPAK0052 B01 BPAK0052 B02 BPAK0058 B01 BPAK0058 B02 52 F 52 F ±20% 15 V 15 V 50 V 1,100 V 58 F 58 F 0.8 mΩ 6.5°C/W 0.58 mΩ ±25% 5.3°C/W -40°C to +65°C -40°C to +70°C 19 mΩ 1.8°C/W 19 mΩ 1.8°C/W Within ±5% of initial measured value at 25°C (at -40°C) Within 150% of initial measured value at 25°C (at -40°C) 3,000 W/kg 11,200 W/kg 3.63 Wh/kg 3,000 W/kg 11,200 W/kg 3.63 Wh/kg Capacitance change Internal resistance change Life test After 10 years at rated voltage and 25°C. Within 20% of initial specified value Within 25% of initial specified value Capacitance change Internal resistance Within 20% of initial specified value Within 100% of initial specified value Page 1 • Document number: 1009361.10 DATASHEET ® 1 5V POWER AND ENERGY SERIES ULTRACAPACITOR PACKS BPAK0052 P015 B01 BPAK0052 P015 B02 BPAK0058 E015 B01 BPAK0058 E015 B02 PRODUCT SPECIFICATIONS (cont.) CYCLES Capacitance change Internal resistance CURRENT Leakage current After 72 hours at 25°C. Initial leakage current can be higher. BPAK0052 B01 BPAK0052 B02 BPAK0058 B01 BPAK0058 B02 Capacitors cycled between specified voltage and half rated voltage under constant current at 25 °C (500,000 cycles). Within 20% of initial specified value Within 100% of initial specified value 1 mA 1,500 A 55 mA 1,500 A 1 mA 1,500 A 55 mA 1,500 A Short circuit current (lsc) CAUTION: C urrent possible with short circuit from UR. Do not use as an operating current Maximum continuous current Maximum peak current, 1 sec CONNECTION Terminal MONITORING (IN-BUILT) Balancing Thermal monitoring SIZE Dimensions Mass Volume RATINGS Vibration resistance 20 A 80 A 20 A 80 A Screw 20 A 80 A 20 A 80 A Active Passive N/A See drawing. Active Passive 500g 0.566 L 500g 0.566 L IEC 61373 560g 0.566 L 560g 0.566 L Page 2 • Document number: 1009361.10 DATASHEET ® 1 5V P OWER AND ENERGY SERIES U LTRACAPACITOR PACKS BPAK0052 P015 B01 BPAK0052 P015 B02 BPAK0058 E015 B01 BPAK0058 E015 B02 DIMENSIONS (mm) Part number BPAK0052 P015 B01 BPAK0052 P015 B02 BPAK0058 E015 B01 BPAK0058 E015 B02 L 216 216 216 216 W 69 69 69 69 H 38 38 38 38 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. MOUNTING RECOMMENDATIONS Units may be mounted and operated in any orientation. The pack should be shock mounted within a protective enclosure. Care should be taken to prevent motion between the pack and the enclosure. This motion can wear through the shrink-wrap covering over time and expose electrically conductive surfaces. Do not reverse polarize module. MARKINGS Modules are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, warning marking, serial number. Maxwell Technologies, Inc. Worldwide Headquarters 9244 Balboa Avenue San Diego, CA 92123 USA Tel: +1 858 503 3300 US Free Call: +1 877 511 4324 Fax: +1 858 503 3301 Maxwell Technologies SA CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Brucker Strasse 21 D-82205 Gilching Germany T: +49 (0)8105 24 16 10 F: +49 (0)8105 24 16 19 Online: www.maxwell.com • Email: info@maxwell.com Maxwell Technologies, Inc. Shanghai Representative Office Rm.2104, Suncome Liauw’s Plaza 738 Shang Cheng Road, Pudong New Area Shanghai 200120, P.R. China Tel: +86 21 5836 5733 Fax: +86 21 5836 5620 Page 3 • Document number: 1009361.10