10A01_11

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# 10A01 THRU 10A07 10 Amp Rectifier 50 to 1000 Volts R-6 Features • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) • • • • • • • High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 400A Peak Low Reverse Leakage Current and Diffused Junction Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C Device Marking Maximum Reccurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V IF(AV) IFSM 10 A 400A Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum Ratings MCC Catalog Number 10A01 10A02 10A03 10A04 10A05 10A06 10A07 D 10A01 10A02 10A03 10A04 10A05 10A06 10A07 A Cathode B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance TA = 50°C 8.3ms, half sine IFM = 10A; TA = 25°C TA = 25°C TA = 100°C DIM A B C D D VF 1.0V 10µA 100µA C IR DIMENSIONS INCHES MIN .340 .340 .048 1.000 MM MIN 8.60 8.60 1.20 25.40 CJ 150pF Measured at 1.0MHz, VR=4.0V MAX .360 .360 .052 --- MAX 9.10 9.10 1.30 --- NOTE Typical Thermal Resistance Junction to Ambien RthJA 10K/W Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: A www.mccsemi.com 1 of 3 2011/01/01 10A01 thru 10A07 I(AV), AVERAGE RECTIFIED CURRENT (A) MCC Micro Commercial Components 100 TM 12 10 8.0 6.0 4.0 2.0 0 IF, INSTANTANEOUS FORWARD CURRENT (A) 10 1.0 Tj = 25ºC 0 50 100 150 TA, AMBIENT TEMPERATURE (ºC) Fi g. 1 Forward Current Derating Curve 200 0.1 0 0.4 0.8 Pulse Width = 300 ms 2% Duty Cycle 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 750 IFSM, PEAK FORWARD SURGE CURRENT (A) 1000 600 Cj, JUNCTION CAPACITANCE (pF) Tj = 25°C f = 1MHz 100 10A01 - 10A04 450 10A05 - 10A07 300 10 150 8.3ms Single Half Sine-Wave JEDEC Method 0 1 1.0 10 100 1 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Peak Forward Surge Current 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 Revision: A www.mccsemi.com 2 of 3 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 500pcs/Reel Ammo Packing: 450pcs/Ammo Box Bulk: 4.8Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 3 of 3 2011/01/01 3