1N4004GP-TP

1N4001GP THRU 1N4007GP Features • Glass Passivated Junction • Low Current Leakage And Low Cost • Epoxy Meets UL 94 V-0 Flammability Rating • Halogen Free Available Upon Request By Adding Suffix "-HF" • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix Designates Compliant. See Ordering Information) 1 Amp Glass Passivated Rectifier 50 - 1000 Volts Maximum Ratings • Operating Junction Temperature Range: -55°C to +175°C • Storage Temperature Range: -55°C to +175°C • Thermal Resistance: 55°C/W Junction to Ambient • Thermal Resistance: 20°C/W Junction to Lead MCC Part Number Maximum Recurrent Peak Reverse Voltage Device Marking DO-41 Maximum DC Blocking Voltage Maximum RMS Voltage 1N4001GP 1N4001GP 50V 35V 50V 1N4002GP 1N4002GP 100V 70V 100V 1N4003GP 1N4003GP 200V 140V 200V 1N4004GP 1N4004GP 400V 280V 400V 1N4005GP 1N4005GP 600V 420V 600V 1N4006GP 1N4006GP 800V 560V 800V 1N4007GP 1N4007GP 1000V 700V 1000V D Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 1.0A See Fig. 3 Peak Forward Surge Current IFSM 30A 8.3ms,Half Sine Maximum Instantaneous Forward Voltage VF 1.1V IFM=1.0A; TJ=25⁰C(Note 2) Maximum DC Reverse Current At Rated DC Blocking Voltage IR 5.0μA 50μA TJ=25⁰C; TJ=125⁰C Typical Junction Capacitance CJ 15pF Measured at 1.0MHz VR=4.0V Typical Reverse Recovery Time trr 2.0μs A Cathode Mark B D C IF=0.5A; IR=1.0A; Irr=0.25A Note 1. High Temperature Solder Exemption Applied,See EU Directive Annex 7a. DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.71 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ 2. Pulse Test: Puls Width 300 usec, Duty Cycle 2% Rev.3-4-12012020 1/3 MCCSEMI.COM 1N4001GP THRU 1N4007GP Curve Characteristics Fig. 1 - Typical Instantaneous Forward Characteristics Fig. 2 - Typical Reverse Leakage Characteristics Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) 10 1 0.1 TJ=25°C 0.01 0.6 0.8 1.0 1.2 1.4 TJ=125°C 1 TJ=75°C TJ=25°C 0.1 0.01 20 Peak Forward Surge Current (A) 1.0 TA 0.8 0.6 0.4 Resistive or Inductive Load 25 50 75 100 125 150 175 100 120 30 25 20 15 10 5 0 200 Temperature (°C) Rev.3-4-12012020 80 Fig. 4 - Maximum Non-Repetitive Peak Forward Surge Current TL 0 60 Fig. 3 - Forward Current Derating Curve 35 0.2 40 Percent of Rated Peak Reverse Voltage (%) 1.2 Average Forward Current (A) 10 Instantaneous Forward Voltage (V) 1.4 0.0 100 8.3 ms Single Half Sine-Wave 1 10 100 Number of Cycles at 60 Hz 2/3 MCCSEMI.COM 1N4001GP THRU 1N4007GP Ordering Information Device Packing (Part Number)-TP Tape&Reel: 5Kpcs/Reel (Part Number)-AP Ammo Packing: 5Kpcs/Ammo Box (Part Number)-BP Bulk:1Kpcs/Box,50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-4-12012020 3/3 MCCSEMI.COM