1N5818-TP

1N5817 THRU 1N5819 Features • • • • • • • Halogen Free Available Upon Request By Adding Suffix "-HF" Guard Ring Protection Low Forward Voltage Low Power Loss For High Efficiency Epoxy Meets UL 94 V-0 Flammability Rating Moisture Sensitivity Level 1 Lead Free Finish/RoHS Compliant(Note 1)("P" Suffix Designates Compliant. See Ordering Information) 1.0 Amp Schottky Barrier Rectifier 20 to 40 Volts Maximum Ratings DO-41 • Operating Junction Temperature Range: -55⁰C to +125⁰C • Storage Temperature Range: -55⁰C to +125⁰C • Maximum Thermal Resistance: 80°C/W Junction to Ambient MCC Part Number 1N5817 1N5818 1N5819 Device Marking Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 20V 30V 40V 1N5817 1N5818 1N5819 14V 21V 28V D 20V 30V 40V A Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 1.0A TA = 90°C Peak Forward Surge Current IFSM 25A 8.3ms,Half Sine Maximum Instantaneous Forward Voltage 1N5817 1N5818 1N5819 Cathode Mark B D VF 0.45V 0.55V 0.60V IFM=1.0A; TJ=25⁰C* C Maximum DC Reverse Current at Rated DC Blocking Voltage IR 0.1mA 10mA TJ=25⁰C; TJ=100⁰C Typical Reverse Recovery Time trr 10ns IF=0.5A, IR=1.0A IRR=0.25A Typical Junction Capacitance CJ 110pF Measured at 1.0MHz VR=4.0V *Pulse test: Pulse width 300 µsec, Duty cycle 2% DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.71 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ Note : 1.High Temperature Solder Exemption Applied, See EU Directive Annex 7a. Rev.3-1-01012019 Downloaded from Arrow.com. 1/3 MCCSEMI.COM 1N5817 THRU 1N5819 Curve Characteristics 30 1.0 25 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 1.2 0.8 0.6 0.4 0.2 Resistive or Inductive Load 0.0 0 25 15 10 5 8.3 ms Single Half Sine-Wave 50 100 75 125 1 100 10 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Instantaneous Forward Characteristics 5 Instantaneous Forward Current (A) TJ=125°C 2 Instantaneous Forward Current (A) 20 0 5 1 0.5 0.2 0.1 TJ=75°C 0.05 TJ=25°C 0.02 0.01 0.0 1N5817 0.2 0.1 0.3 0.4 0.5 0.6 0.7 2 1 TJ=125°C 0.5 0.2 TJ=75°C 0.1 0.05 TJ=25°C 0.02 0.01 0.0 0.8 1N5819 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Instantaneous Forward Voltage (V) Instantaneous Forward Voltage (V) Fig. 5 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Reverse Leakage Characteristics 10000 0.8 10000 Instantaneous Reverse Leakage Current (μA) Instantaneous Reverse Leakage Current (μA) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current TJ=125°C 1000 TJ=75°C 100 10 TJ=25°C 1N5817 1 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Rev.3-1-01012019 Downloaded from Arrow.com. 1000 TJ=125°C 100 TJ=75°C 10 TJ=25°C 1 20 40 60 1N5819 80 100 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM 1N5817 THRU 1N5819 Ordering Information Device Packing Part Number-TP Tape&Reel:5Kpcs/Reel Part Number-AP Ammo Packing:5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 Downloaded from Arrow.com. 3/3 MCCSEMI.COM