1N5929BP-TP

1N5918BP THRU 1N5956BP Features • • • • Glass Passivated Junction Halogen Free Available Upon Request By Adding Suffix "-HF" Epoxy Meets UL 94 V-0 Flammability Rating Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates Compliant. See Ordering Information) 1.5 Watt Zener Diode 5.1 to 200 Volts Maximum Ratings • • Operating Junction Temperature Range: -55°C to +175°C Storage Temperature Range: -55°C to +175°C Symbol Rating Conditions Peak Forward Surge Current IFSM 10A 8.3ms single half sine/square wave Power Dissipation PD 1.5W Parameter Maximum Forward Voltage DO-41 TL= 75°C,Note 2 D VF 1.5V IF=200mA Note: 1. High Temperature Solder Exemption Applied, See EU Directive Annex Notes 7a. 2. 0.375" lead length from body. A Cathode Mark B D C DIM A B C D Rev.3-2-12012020 1/4 DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.70 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ MCCSEMI.COM 1N5918BP THRU 1N5956BP Electrical Characteristics @ 25°C Unless Otherwise Specified MCC Part Number 1N5918BP 1N5919BP 1N5920BP 1N5921BP 1N5922BP 1N5923BP 1N5924BP 1N5925BP 1N5926BP 1N5927BP 1N5928BP 1N5929BP 1N5930BP 1N5931BP 1N5932BP 1N5933BP 1N5934BP 1N5935BP 1N5936BP 1N5937BP 1N5938BP 1N5939BP 1N5940BP 1N5941BP 1N5942BP 1N5943BP 1N5944BP 1N5945BP 1N5946BP 1N5947BP 1N5948BP 1N5949BP 1N5950BP 1N5951BP 1N5952BP 1N5953BP 1N5954BP 1N5955BP 1N5956BP Zener Voltage Test Current Maximum Dynamic Impedance Knee Current Knee Impedance Maximum Reverse Current Reverse Voltage MARKING VZ IZT ZZT @ IZT IZK ZZk IR VR CODE V 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 mA 73.5 66.9 60.5 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8 7.3 6.7 6 5.5 5 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 Ω 4 2 2 2.5 3 3.5 4 4.5 5.5 6.5 7 9 10 12 14 17.5 19 23 28 33 38 45 53 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200 mA 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Ω 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 µA 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 V 2 3 4 5.2 6 6.5 7 8 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152 1N5918BP 1N5919BP 1N5920BP 1N5921BP 1N5922BP 1N5923BP 1N5924BP 1N5925BP 1N5926BP 1N5927BP 1N5928BP 1N5929BP 1N5930BP 1N5931BP 1N5932BP 1N5933BP 1N5934BP 1N5935BP 1N5936BP 1N5937BP 1N5938BP 1N5939BP 1N5940BP 1N5941BP 1N5942BP 1N5943BP 1N5944BP 1N5945BP 1N5946BP 1N5947BP 1N5948BP 1N5949BP 1N5950BP 1N5951BP 1N5952BP 1N5953BP 1N5954BP 1N5955BP 1N5956BP Note : TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation - The type numbers listed indicate a tolerance of +/-5% Rev.3-2-12012020 2/4 MCCSEMI.COM 1N5918BP THRU 1N5956BP Curve Characteristics Fig. 2 - Typical Zener Breakdown Characteristics Fig. 1 - Power Derating Curve 100 2.0 20 1.5 Zener Current (mA) Power Dissipation (W) 50 1.0 0.5 10 5 2 1 0.5 VZ − 5.1 thru 10 Volts 0.2 0.1 0.0 0 25 50 75 100 125 150 175 0 2 4 6 8 10 Zener Voltage (V) Lead Temperature (°C) Fig. 3 - Typical Zener Breakdown Characteristics 100 VZ − 12 thru 68 Volts 50 Zener Current (mA) 20 10 5 2 1 0.5 0.2 0.1 0 10 20 30 40 50 60 70 80 Zener Voltage (V) Rev.3-2-12012020 3/4 MCCSEMI.COM 1N5918BP THRU 1N5956BP Ordering Information Device Packing (Part Number)-TP Tape&Reel: 5Kpcs/Reel (Part Number)-AP Ammo Packing: 5Kpcs/Ammo Box (Part Number)-BP Bulk:1Kpcs/Box,50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-12012020 4/4 MCCSEMI.COM