1N5931BP-TP

MCC TM Micro Commercial Components 1N5913BP THRU 1N5956BP
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • • • • • • • • • Glass Passivated Junction Low Profile Package Low Inductance Built-in Strain Relief Halogen free available upon request by adding suffix "-HF" Lead Free Finish/RoHS Compliant (Note1)("P"Suffix designates Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Marking : 1N5913B~1N5956B type number and Cathode Band 1.5 Watt Zener Diode 3.3to 200 Volts DO-41 Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Value Unit Forward Voltage at IF=200mA VF 1.5 V D Ptot 1.5 W A Power Dissipation at (2) Cathode Mark TL = 75° C B Pwak forward Surge Current 8.3ms single half D I FSM 10 Amps sine/square wave Junction Temperature C Tj -55 ~ +175 o C DIMENSIONS Storage Temperature INCHES TSTG -55 ~ +175 o C Range Note1: High Temperature Solder Exemption Applied, see EU Directive Annex 7. MM DIM NOTE MIN MAX MIN MAX A 0.160 0.205 4.10 5.20 B 0.080 0.107 2.00 2.70 Diameter C 0.028 0.034 0.71 0.86 Diameter D 1.000 ----- 25.40 ----- 2. 0.375" lead length from body. Revision: C www.mccsemi.com 1 of 5 2013/01/01 MCC 1N5913BP THRU 1N5956BP TM Micro Commercial Components ELECTRICAL CHARACTERISTICS @25°C MCC PART NUMBER MAXIMUM DYNAMIC ZENER TEST VOLTAGE CURRENT VZ IZT IMPEDANCE ZZT @IZT KNEE CURRENT IZK KNEE IMPEDANCE ZZK MAXIMUM REVERSE CURRENT IR A REVERSE VOLTAGE VR VOLTS mA OHMS mA OHMS 1N5913BP 3.3 113.6 10 1 500 100 VOLTS 1 1N5914BP 3.6 104.2 9 1 500 75 1 1N5915BP 3.9 96.1 7.5 1 500 25 1 1N5916BP 4.3 87.2 6 1 500 5 1 1N5917BP 4.7 79.8 5 1 500 5 1.5 1N5918BP 5.1 73.5 4 1 350 5 2 1N5919BP 5.6 66.9 2 1 250 5 3 1N5920BP 6.2 60.5 2 1 200 5 4 1N5921BP 6.8 55.1 2.5 1 200 5 5.2 1N5922BP 7.5 50 3 0.5 400 5 6 1N5923BP 8.2 45.7 3.5 0.5 400 5 6.5 1N5924BP 9.1 41.2 4 0.5 500 5 7 1N5925BP 10 37.5 4.5 0.25 500 5 8 1N5926BP 11 34.1 5.5 0.25 550 1 8.4 1N5927BP 12 31.2 6.5 0.25 550 1 9.1 1N5928BP 13 28.8 7 0.25 550 1 9.9 1N5929BP 15 25 9 0.25 600 1 11.4 1N5930BP 16 23.4 10 0.25 600 1 12.2 1N5931BP 18 20.8 12 0.25 650 1 13.7 1N5932BP 20 18.7 14 0.25 650 1 15.2 1N5933BP 22 17 17.5 0.25 650 1 16.7 1N5934BP 24 15.6 19 0.25 700 1 18.2 1N5935BP 27 13.9 23 0.25 700 1 20.6 1N5936BP 30 12.5 28 0.25 750 1 22.8 1N5937BP 33 11.4 33 0.25 800 1 25.1 1N5938BP 36 10.4 38 0.25 850 1 27.4 1N5939BP 39 9.6 45 0.25 900 1 29.7 1N5940BP 43 8.7 53 0.25 950 1 32.7 1N5941BP 47 8 67 0.25 1000 1 35.8 1N5942BP 51 7.3 70 0.25 1100 1 38.8 1N5943BP 56 6.7 86 0.25 1300 1 42.6 1N5944BP 62 6 100 0.25 1500 1 47.1 1N5945BP 68 5.5 120 0.25 1700 1 51.7 1N5946BP 75 5 140 0.25 2000 1 56 1N5947BP 82 4.6 160 0.25 2500 1 62.2 69.2 1N5948BP 91 4.1 200 0.25 3000 1 1N5949BP 100 3.7 250 0.25 3100 1 76 1N5950BP 110 3.4 300 0.25 4000 1 83.6 1N5951BP 120 3.1 380 0.25 4500 1 91.2 1N5952BP 130 2.9 450 0.25 5000 1 98.8 1N5953BP 150 2.5 600 0.25 6000 1 114 1N5954BP 160 2.3 700 0.25 6500 1 121.6 1N5955BP 180 2.1 900 0.25 7000 1 136.8 1N5956BP 200 1.9 1200 0.25 8000 1 152 * TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation - The type numbers listed indicate a tolerance of +/-5% Revision: C www.mccsemi.com 2 of 5 2013/01/01 MCC 1N5913BP THRU 1N5956BP TM Micro Commercial Components Characteristics (Tj=25℃ unless otherwise specified) Symbol Parameter Vz Reverse zener voltage @ IZT IZT Reverse current ZZT Maximum zener impedance @ IZT IZK Reverse current ZZK Maximum zener impedance @ IZK IR Reverse leakage current @ VR VR Breakdown voltage IF Forward current VF Forward voltage @ IF Figure 1. Zener voltage regulator Figure 2. Steady state power derating Figure 3. Vz – 3.3 thru 10 volts Figure 4. Zener voltage – 3.3 to 12 volts Figure 5. Zener voltage – 14 to 43 volts Revision: C www.mccsemi.com 3 of 5 2013/01/01 MCC 1N5913BP THRU 1N5956BP TM Micro Commercial Components Figure 6. Effect of zener voltage Figure 7. Capacitance curve Figure 8. Typical pulse rating curve Figure 9. Pulse waveform Figure 10. Pulse waveform Revision: C www.mccsemi.com 4 of 5 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 5 of 5 2013/01/01