2A04-AP

MCC TM Micro Commercial Components 2A01 THRU 2A07
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features 2 Amp Silicon Rectifier 50 to 1000 Volts Halogen free available upon request by adding suffix "-HF" • • Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) • • • • Low Forward Voltage Drop High Current Capability Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 DO-15 Maximum Ratings • • • Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Typical Thermal Resistance (R θJA) 40°C/W MCC Catalog Number Device Marking 2A01 2A02 2A03 2A04 2A05 2A06 2A07 2A01 2A02 2A03 2A04 2A05 2A06 2A07 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V D A Cathode Mark B D C Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward IF(AV) 2A TA = 75°C Current Peak Forward Surge IFSM 60A 8.3ms, half sine Current IFM = 2.0A; Maximum 1.0V Instantaneous VF TA = 25°C Forward Voltage Maximum DC Reverse Current At IR 5.0µA TA = 25°C Rated DC Blocking 50µA TA = 100°C Voltage Typical Junction CJ 20pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse Test: Pulse Width 300µsec, Duty Cycle 1% Note: DIMENSIONS DIM A B C D INCHES MIN .230 .104 .026 1.000 MAX .300 .140 .034 --- MM MIN 5.80 2.60 .70 25.40 MAX 7.60 3.60 .90 --- NOTE 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: B www.mccsemi.com 1 of 4 2013/01/01 MCC 2A01 thru 2A07 Figure 1 Typical Forward Characteristics TM Micro Commercial Components 20 Figure 2 Forward Derating Curve 10 3.0 6 4 2.5 2 25°C µAmps 2.0 1 .6 1.5 Amps .4 1.0 .2 .5 .1 Single Phase, Half Wave 60Hz Resistive or Inductive Load .06 0 .04 0 50 75 100 125 150 175 °C .02 .01 .2 .4 .6 .8 1.0 Average Forward Rectified Current - Amperesversus Ambient Temperature - °C 1.2 Volts Instantaneous Forward Current - MicroAmperesversus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25°C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pFversus Reverse Voltage - Volts Revision: B www.mccsemi.com 2 of 4 2013/01/01 MCC 2A01 thru 2A07 TM Micro Commercial Components Figure 5 Peak Forward Surge Current Figure 4 Typical Reverse Characteristics 120 10 6 100 4 80 2 TJ=100°C 60 1 Amps .6 40 .4 20 .2 0 Amps .1 1 2 4 6 8 10 20 40 60 80 100 Cycles .06 Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles .04 TJ=25°C .02 .01 .006 .00 4 .002 .001 20 40 60 80 100 120 140 Volts Instantaneous Reverse Current - Ampsversus Percent Of Rated Peak Reverse Voltage - Volts Revision: B www.mccsemi.com 3 of 4 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 4Kpcs/Reel Part Number-AP Ammo Packing: 3Kpcs/Ammo Box Part Number-BP Bulk: 25Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 4 of 4 2013/01/01 3