2EZ28D5-TP

2EZ5.1D5 THRU 2EZ75D5 Features • • • • Glass Passivated Junction Excellent Clamping Capability Halogen Free Available Upon Request By Adding Suffix "-HF" Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates Compliant. See Ordering Information) 2.0 W Silicon Zener Diodes 5.1 to 75 Volts Maximum Ratings • • Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Parameter Peak Forward Surge Current Power Dissipation Symbol Rating IFSM 15A Note 2 2.0W Note 3 PD Power Derating Maximum Forward Voltage 36mW/oC VF 1.2V DO-41 Conditions D Above 75oC IF=200mA A Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7a 2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 3. Mounted on 5.0mm2 (0.013mm thick) land areas. Cathode Mark B D C DIM A B C D Rev.3-2-12012020 1/4 DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.70 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ MCCSEMI.COM 2EZ5.1D5 THRU 2EZ75D5 Electrical Characteristics @ 25°C Unless Otherwise Specified MCC Part Number 2EZ5.1D5 2EZ5.6D5 2EZ6.2D5 2EZ6.8D5 2EZ7.5D5 2EZ8.2D5 2EZ9.1D5 2EZ10D5 2EZ11D5 2EZ12D5 2EZ13D5 2EZ14D5 2EZ15D5 2EZ16D5 2EZ17D5 2EZ18D5 2EZ19D5 2EZ20D5 2EZ22D5 2EZ24D5 2EZ27D5 2EZ30D5 2EZ33D5 2EZ36D5 2EZ39D5 2EZ43D5 2EZ47D5 2EZ51D5 2EZ56D5 2EZ62D5 2EZ68D5 2EZ75D5 Nominal Zener Voltage Test current VZ@IZT IZT V mA 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 98 89.5 80.5 73.5 66.5 61 55 50 45.5 41.5 38.5 35.7 33.4 31.2 29.4 27.8 26.3 25 22.8 20.8 18.5 16.6 15.1 13.9 12.8 11.6 10.6 9.8 9.0 8.1 7.4 6.7 Leakage Current Maximum Zener Impedance ZZT @ IZT ZZk @ IZK IZK IR VR Ω Ω mA µA(Max.) V 3.5 2.5 1.5 2.0 2.0 2.3 2.5 3.5 4.0 4.5 5.0 5.5 7.0 8.0 9.0 10 11 11 12 13 18 20 23 25 30 35 40 48 55 60 75 90 600 500 700 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 5.0 5.0 5.0 5.0 5.0 5.0 3.0 3.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 7.6 8.4 9.1 9.9 10.6 11.4 12.2 13.0 13.7 14.4 15.2 16.7 18.2 20.6 22.5 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56.0 Maximum Zener Current IZM mA 356 324 292 266 242 220 200 182 166 152 138 130 122 114 107 100 95 90 82 76 68 60 55 50 47 43 39 36 32 29 27 24 MARKING CODE 2EZ5.1D5 2EZ5.6D5 2EZ6.2D5 2EZ6.8D5 2EZ7.5D5 2EZ8.2D5 2EZ9.1D5 2EZ10D5 2EZ11D5 2EZ12D5 2EZ13D5 2EZ14D5 2EZ15D5 2EZ16D5 2EZ17D5 2EZ18D5 2EZ19D5 2EZ20D5 2EZ22D5 2EZ24D5 2EZ27D5 2EZ30D5 2EZ33D5 2EZ36D5 2EZ39D5 2EZ43D5 2EZ47D5 2EZ51D5 2EZ56D5 2EZ62D5 2EZ68D5 2EZ75D5 Notes: TOLERANCES - Suffix indicates 5% tolerance any other tolerance will be considered as a special device. Rev.3-2-12012020 2/4 MCCSEMI.COM 2EZ5.1D5 THRU 2EZ75D5 Curve Characteristics Fig. 2 - Typical Zener Breakdown Characteristics Fig. 1 - Power Derating Curve 100 2.5 50 20 Zener Current (mA) Power Dissipation (W) 2.0 1.5 1.0 10 5 2 1 0.5 0.5 VZ − 5.1 thru 10 Volts 0.2 0.1 0.0 0 25 50 75 100 125 150 0 2 4 6 8 10 Zener Voltage (V) Lead Temperature (°C) Fig. 3 - Typical Zener Breakdown Characteristics 100 VZ − 12 thru 68 Volts 50 Zener Current (mA) 20 10 5 2 1 0.5 0.2 0.1 0 10 20 30 40 50 60 70 80 Zener Voltage (V) Rev.3-2-12012020 3/4 MCCSEMI.COM 2EZ5.1D5 THRU 2EZ75D5 Ordering Information Device Packing (Part Number)-TP Tape&Reel: 5Kpcs/Reel (Part Number)-AP Ammo Packing: 5Kpcs/Ammo Box (Part Number)-BP Bulk:1Kpcs/Box,50Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-12012020 4/4 MCCSEMI.COM