2N2219A

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# 2N2219A Features Features • • • • • Collector - Base Voltage 75 V Collector - Current 800 mA Medium Current, Bipolar Transistor Marking: Type number Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) SWITCHING TRANSISTOR SMALL SIGNAL BIPOLAR NPN SILICON TO-39 ABSOLUTE MAXIMUM RATINGS Collector - Emitter Voltage Collector - Base Voltage Emitter - Base Voltage Collector Current - Continuous Total Device Dissipation @ TA = 25 ° C Derate above 25 ° C Total Device Dissipation @ TC = 25 ° C Derate above 25 ° C Operating Junction&Storage Temperature Range VCEO VCBO VEBO IC PD PD T J, Tstg 50 75 6 800 0.8 4.6 1.0 17.0 - 55 to +200 Vdc Vdc Vdc mAdc WATTS mW/° C WATTS mW/° C °C Thermal Characteristics CHARACTERISTIC Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case SYMBOL Rθ JA Rθ JC MAX 217 59 UNIT ° C/W ° C/W Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: A 1 of 10 2011/01/01 2N2219A MCC TM Micro Commercial Components Electrical Characteristics (TA = 25°C unless otherwise noted) OFF CHARACTERISTIC Collector - Emitter Breakdown Voltage (1) ( IC = 10 mA dc, IB = 0 ) Collector - Base Breakdown Voltage ( IC = 10 µ Adc, IE = 0 ) Emitter - Base Breakdown Voltage ( IE = 10 µ Adc, IC = 0 ) Collector - Emitter Cutoff Current ( VCE = 50 Vdc ) Collector - Base Cutoff Current ( VCB = 60 Vdc, IE = 0 ) ( VCB = 60 Vdc, IE = 0, T A = 150 ° C ) Emitter - Base Cutoff Current ( VEB = 4 Vdc ) ( VEB = 6 Vdc ) ON CHARACTERISTIC DC Current Gain ( IC = 0.1 mA dc, VCE = 10 Vdc ) (1) ( IC = 1 mA dc, VCE = 10 Vdc ) (1) ( IC = 10 mA dc, VCE = 10 Vdc ) (1) ( IC = 150 mA dc, VCE = 10 Vdc ) (1) ( IC = 500 mA dc, VCE = 10 Vdc ) (1) ( IC = 10 mA dc, VCE = 10 Vdc, TJ = -55° C ) (1) Collector - Emitter Saturation Voltage ( IC = 150 mAdc, IB = 15 mAdc ) (1) ( IC = 500 mAdc, IB = 50 mAdc ) (1) Base - Emitter Saturation Voltage ( IC = 150 mAdc, IB = 15 mAdc ) (1) ( IC = 500 mAdc, IB = 50 mAdc ) (1) 1. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤.2% SYMBOL V(BR)CEO V(BR)CBO 75 V(BR)EBO 6 ICES 10 ICBO 10 10 IEBO 10 10 SYMBOL hFE MIN 50 75 100 100 30 35 VCE(sat) 0.3 1.0 VBE(sat) 0.6 1.2 2.0 Vdc Vdc Vdc Vdc MAX nAdc µ Adc UNIT nAdc µ Adc nAdc Vdc Vdc MIN 50 MAX UNIT Vdc 325 300 www.mccsemi.com Revision: A 2 of 10 2011/01/01 2N2219A MCC TM Micro Commercial Components Electrical Characteristics (TA = 25°C unless otherwise noted) SMALL - SIGNAL CHARACTERISTICS Output Capacitance ( VCB = 10 Vdc, IE = 0, 100kHz ≤ f ≤ 1 MHz ) Input Capacitance ( VEB = 0.5 Vdc, IC = 0, 100kHz ≤ f ≤ 1 MHz ) SWITCHING CHARACTERISTICS Turn - On Time ( VCC = 30 Vdc, IC = 150 mAdc, IB1 =15 mAdc) ( See FIGURE 1 ) Turn - Off Time ( VCC = 30 Vdc, IC = 150 mAdc, IB1 = - IB2 = 15 mAdc) ( See FIGURE 2 ) SYMBOL Cobo Cibo 25 SYMBOL ton MIN MAX pF UNIT MIN MAX 8.0 UNIT pF 35 toff 300 ns ns Small - Signal AC Characteristics (TA = 25°C) LOW FREQUENCY Common - Emitter Forward Current Transfer Ratio ( IC = 1 mA, VCE = 10 V, f = 1kHz ) HIGH FREQUENCY Common - Emitter Forward Current Transfer Ratio ( IC = 20 mA, VCE = 20 V, f = 100 MHz ) SYMBOL hfe MIN 75 |hfe| 2.5 12 MAX UNIT www.mccsemi.com Revision: A 3 of 10 2011/01/01 2N2219A MCC TM Micro Commercial Components TO-39 CASE OUTLINE www.mccsemi.com Revision: A 4 of 10 2011/01/01 2N2219A MCC TM Micro Commercial Components FIGURE 1 Saturated Turn-on Time Test Circuit t FIGURE 2 Saturated Turn-off Time Test Circuit www.mccsemi.com Revision: A 5 of 10 2011/01/01 2N2219A MCC TM Micro Commercial Components DC CURRENT GAIN VCE = 10 V 250 250 typ @ 25C 200 200 hFE CURRENT GAIN 150 150 100 typ @ -55C 100 50 50 0 .0001 .001 .01 .1 1 0 IC COLLECTOR CURRENT (A) FIGURE 3 VCE, COLLECTOR-EMITTER (V) COLLECTOR SATURATION vs BASE CURRENT TJ = 25 C 1.0 1.0 0.8 IC = 500 mA 0.6 IC = 150 mA 0.4 0.8 0.6 0.4 0.2 0.2 0.0 .0001 .001 .01 .1 1 0.0 IB, BASE CURRENT (A) FIGURE 4 www.mccsemi.com Revision: A 6 of 10 2011/01/01 2N2219A BASE SATURATION vs BASE CURRENT TJ = 25 C 1.25 1.25 MCC TM Micro Commercial Components VBE, BASE-EMITTER VOLTAGE (V) IC = 500 ma 1.00 IC = 150 ma 1.00 0.75 0.75 0.50 .001 .01 .1 1 0.50 IB, BASE CURRENT (A) FIGURE 5 JUNCTION CAPACITANCE TJ = 25 C 100 kHz < f < 1 MHz JUNCTION CAPACITANCE (pF) 30 30 25 CIBO 20 COBO 15 25 20 15 10 10 5 5 0 .01 .1 1 10 0 100 REVERSE JUNCTION VOLTAGE (V) FIGURE 6 www.mccsemi.com Revision: A 7 of 10 2011/01/01 2N2219A SWITCHING TURN - 0N TIME TJ = 25 C IC/IB = 10 100 100 MCC TM Micro Commercial Components ton TIME (ns) max. min. 10 10 100 10 1000 COLLECTOR CURRENT (mA) FIGURE 7 SWITCHING TURN - OFF TIME TJ = 25 C IC/IB = 10 1000 1000 (ns) max. toff TIME min. 100 10 100 100 500 COLLECTOR CURRENT (mA) FIGURE 8 www.mccsemi.com Revision: A 8 of 10 2011/01/01 2N2219A MCC TM Micro Commercial Components NORMALIZED GAIN VS FREQUENCY TJ = 25C IC = 20 mA VCE = 20 V 1 1 NORMALIZED GAIN .1 .1 .01 1 10 100 .01 1000 FREQUENCY MHz FIGURE 9 www.mccsemi.com Revision: A 9 of 10 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-BP Packing Bulk;50pcs/Box ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 10 of 10 2011/01/01