2N4403-AP

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# 2N4403 Features • • Through Hole Package Capable of 600mWatts of Power Dissipation Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL rating 1 Marking:Type number Lead Free Finish/Rohs Compliant ("P"Suffix designates Compliant. See ordering information) PNP General Purpose Amplifier TO-92 A E • Electrical Characteristics @ 25°C Unless Otherwise Specified Symbol Parameter Collector-Emitter Breakdown Voltage* (I C=-1.0mAdc, IB=0) Collector-Base Breakdown Voltage (I C=-10µAdc, IE=0) Emitter-Base Breakdown Voltage (I E=-10µAdc, IC=0) Base Cutoff Current (VCE=-30Vdc, VBE=-3.0Vdc) Collector Cutoff Current (VCE=-30Vdc, VBE=-3.0Vdc) DC Current Gain* (I C=-0.1mAdc, VCE=-1.0Vdc) (I C=-1.0mAdc, VCE=-1.0Vdc) (I C=-10mAdc, VCE=-1.0Vdc) (I C=-150mAdc, VCE=-2.0Vdc) (I C=-500mAdc, VCE=-2.0Vdc) Collector-Emitter Saturation Voltage (I C=-150mAdc, IB=-15mAdc) (I C=-500mAdc, IB=-50mAdc) Base-Emitter Saturation Voltage (I C=-150mAdc, IB=-15mAdc) (I C=-500mAdc, IB=-50mAdc) Current Gain-Bandwidth Product (I C=-20mAdc, VCE=-10Vdc, f=100MHz) Output Capacitance (VCB=-10Vdc, IE=0, f=140kHz) Input Capacitance (VEB=-0.5Vdc, IC=0, f=140kHz) Delay Time (VCC=-3.0Vdc, VBE=-2.0Vdc Rise Time IC=-150mAdc, IB1=-15mAdc) Storage Time (VCC=-3.0Vdc, IC=-150mAdc Fall Time IB1=IB2=-15mAdc) ≤ 300µ s, Duty Cycle ≤ 2.0% Min -40 -40 -5.0 -0.1 -0.1 Max Units Vdc Vdc Vdc µ Adc µ Adc OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX B ON CHARACTERISTICS hFE 30 60 100 100 20 C 300 VCE(sat) -0.4 -0.75 -0.75 -0.95 -1.30 Vdc D VBE(sat) Vdc C B E SMALL-SIGNAL CHARACTERISTICS fT Ccb Ceb 200 8.5 30.0 15 20 225 30 MHz pF pF ns ns ns ns DIM A B C D E G INCHES MIN .170 .170 .550 .010 .130 .010 G DIMENSIONS MM MIN 4.33 4.30 13.97 0.36 3.30 2.44 SWITCHING CHARACTERISTICS td tr ts tf *Pulse Width MAX .190 .190 .590 .020 .160 .104 MAX 4.83 4.83 14.97 0.56 3.96 2.64 NOTE www.mccsemi.com Revision: 6 1 of 4 2008/02/01 2N4403 MCC Micro Commercial Components DC Current Gain vs Collector Current 300 VCE = 10V 250 200 1.2 1.0 0.8 VBE(ON) - (V) 150 100 50 0.6 0.4 T = 100°C A 0.2 0 0.1 Base-Emitter ON Voltage vs Collector Current VCE = 5.0V TM hFE TA = 25°C 0.1 1 IC (mA) 10 100 1.0 IC - (mA) 10 100 Pulsed Base Saturation Volatge vs Collector Current -1.5 IC/IB = 10 -1.3 -1.1 VBE(SAT) - (V) -0.9 VCE(SAT) - (V) -.1 -.5 Pulsed Collector Saturation Voltage vs Collector Current IC/IB = 10 -0.7 -.05 -0.5 0 -1.0 -.02 -1.0 -10 -100 IC - (mA) -1000 -10 IC - (mA) -100 -1000 Collector Reverse Current vs Reverse Bias Voltage 100 0 TA = 25°C 100 ICES - (µA) 10 pF Input and Output Capacitances vs Reverse Bias Voltage 20 TA = 25°C 16 CIBO 12 8 4 1.0 0 -10 -20 -30 VCE - (V) -40 -50 -60 0 -0.1 COBO -1.0 Volts - (V) -10 www.mccsemi.com Revision: 6 2 of 4 2008/02/01 2N4403 MCC TM Micro Commercial Components Maximum Power Dissipation vs Ambient Temperature 800 1000 Turn On and Turn Off Times vs Collector Current 600 TO-92 PD(MAX) - (mW) 400 T - (ns) 100 toff ton 10 200 SOT-23 0 0 50 100 TA - (°C) Contours of Constant Gain Bandwidth Product (fT) 1000 -10 -8 100 VCE - (V) -4 -1.0 -.8 -.4 0 -0.1 1.0 -1.0 -10 IC - (mA) *25MHz increments from 50 to 200MHz -100 10 td 100 IC - (mA) 1000 T - (ns) ts tf tr IB1 = IB2 = IC/10 150 200 1.0 10 IB1 = IB2 = IC/10 VCC(OFF) = 15V 100 IC - (mA) Switching Times vs Collector Current 1000 10 www.mccsemi.com Revision: 6 3 of 4 2008/02/01 MCC Device TM Micro Commercial Components Ordering Information Packing Ammo Packing;2Kpcs/AmmoBox Bulk;1Kpcs/Bag (Part Number)-AP (Part Number)-BP ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 6 4 of 4 2008/02/01