2N5401-BP

2N5401 Features • Halogen Free Available Upon Request By Adding Suffix "-HF" • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant ("P" Suffix Designates RoHS Compliant. See Ordering Information) PNP Silicon Amplifier Transistor Maximum Ratings @ 25°C Unless Otherwise Specified • Operating Junction Temperature Range: -55℃ to +150℃ • Storage Temperature Range: -55℃ to +150℃ • Thermal Resistance: 200℃/W Junction to Ambient • Thermal Resistance: 83.3℃/W Junction to Case Parameter Symbol Rating Unit Collector-Base Voltage VCBO -160 V Collector-Emitter Voltage VCEO -150 V Emitter-Base Voltage VEBO -5 V IC -600 mA 625 mW 5 mW/℃ 1.5 W 12 mW/℃ Continuous Collector Current TA=25℃,Derate Power Dissipation above 25℃ TC=25℃,Derate above 25℃ PD TO-92 A E B G 1 2 3 Marking:2N5401 C Internal Structure C B E D 1.EMITTER 2.BASE 3.COLLECTOR DIM A B C D E G Rev.3-1-01012019 1/4 DIMENSIONS INCHES MM NOTE MIN MAX MIN MAX 0.169 0.185 4.30 4.70 0.169 0.185 4.30 4.70 0.500 ----- 12.70 ----0.015 0.022 0.38 0.55 0.130 0.146 3.30 3.70 0.095 0.105 2.42 2.67 Straight Lead 0.173 0.220 4.40 5.60 Bent MCCSEMI.COM 2N5401 Electrical Characteristics @ TA=25°C Unless Otherwise Specified Parameter Symbol Min Collector-Base Breakdown Voltage V(BR)CBO -160 V IC=-100µA, IE=0 Collector-Emitter Breakdown Voltage* V(BR)CEO -150 V IC=-1mA, IB=0 Emitter-Base Breakdown Voltage V(BR)EBO -5 V IE=-10µA, IC=0 -0.05 µA VCB=-120V, IE=0 -50 µA -0.05 µA VCB=-120V, IE=0, TA=100℃ VEB=-3V, IC=0 Collector Cut-off Current ICBO Emitter Cut-off Current IEBO DC Current Gain* hFE(1) 50 hFE(2) 60 hFE(3) 50 Collector-Emitter Saturation Voltage VCE(sat) Base-Emitter Saturation Voltage VBE(sat) Transition Frequency fT Output Capacitance Cobo Small–Signal Current Gain hFE Noise Figure NF Typ Max Units Conditions VCE=-5V, IC=-1mA VCE=-5V, IC=-10mA 300 VCE=-5V, IC=-50mA 100 40 -0.2 V IC=-10mA, IB=-1mA -0.5 V IC=-50mA, IB=-5mA -1 V IC=-10mA, IB=-1mA -1 V IC=-50mA, IB=-5mA 300 MHz 6 pF VCB=-10V, IE=0,f=1MHz VCE=-10V, IC=-1mA, f = 1KHz 200 8 VCE=-10V, IC=-10mA, f=100MHz dB VCE=-5V,IC=-0.25mA,f=1KHz,RS=1KΩ *.Pulse test: Pulse Width≤300μs,Duty Cycle≤2.0%. Rev.3-1-01012019 2/4 MCCSEMI.COM 2N5401 Curve Characteristics Fig. 1 - Static Characteristics -35 Fig. 2 - DC Current Gain Characteristics 500 Common Emitter TA=25°C -30 Common Emitter VCE= - 5V TA=100°C -200μA -160μA DC Current Gain Collector Current (mA) -180μA -25 -140μA -20 -120μA -100μA -15 -80μA -10 -60μA 10 -40μA -5 -0 TA=25°C 100 IB=-20μA -0 -2 -4 -6 -8 -10 -12 -14 -16 4 -0.3 -18 -1 Collector-Emitter Voltage (V) -100 -500 Fig. 4 - Collector-Emitter Saturation Voltage Characteristics Fig. 3 - Base-Emitter Saturation Voltage Characteristics -1 Collector-Emitter Saturation Voltage (V) -1.0 Base-Emitter Saturation Voltage (V) -10 Collector Current (mA) -0.9 -0.8 -0.7 TA=25°C -0.6 TA=100°C -0.5 -0.4 TA=100°C -0.1 TA=25°C β=10 β=10 -0.3 -0.1 -1 -10 -0.01 -0.1 -100 -1 Collector Current (mA) -100 Collector Current (mA) Fig. 5 - Transition frequency Characteristics Fig. 6 - Collector Power Derating Curve 300 0.8 VCE= -10V TA=25°C Collector Power Dissipation (W) 250 Transition frequency (MHz) -10 200 150 100 50 0 -0 -5 -10 -15 -20 -25 0.4 0.2 0.0 -30 0 Collcetor Current (mA) Rev.3-1-01012019 0.6 25 50 75 100 125 150 Ambient Temperature (°C) 3/4 MCCSEMI.COM 2N5401 Ordering Information Device Packing Part Number-AP Ammo Packing: 20Kpcs/Carton Part Number-BP Bulk: 100Kpcs/Carton Note : Adding "-HF" Suffix for Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 4/4 MCCSEMI.COM