3SMAJ5913B-TP

MCC 3SMBJ5913B THRU 3SMBJ5917B R Micro Commercial Components Micro Commercial Components 20736 Marilla Street Chatsworth CA 91311 Phone:(818) 701-4933 Fax: (818) 701-4939 Features • • • • • • • • 3.0 Watt Surface Mount Silicon Zener Diodes Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) 3.3 thru 4.7 Volt Voltage Range Low Inductance, Low Profile Mounting Glasss Passivated Junction Available On Tape and Reel Halogen free available upon request by adding suffix "-HF" Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 DO-214AA (SMB) (LEAD FRAME) Mechanical Data
Terminals solderable per MIL-STD-750, Method 2026
Polarity is indicated by cathode band.
Packaging: Standard 12mm Tape (see EIA 481)
Maximum temperature for soldering: 260 C for 10 seconds. A 0 B Maximum Ratings @ 25oC Unless Otherwise Specified Maximum Forward Voltage Steady State Power Dissipation Operation and Storage Temperature VF 1.5V (Note: 2) Pd 3.0W (Note: 3) F H D G E TJ , TSTG -65oCoto +150 C DIMENSIONS DIM A B C D E F G H 42o C /W Thermal Resistance RthJA Junction to Ambient Note: C INCHES MIN .160 .130 .006 .030 .200 .079 .075 .002 MM MIN 4.06 3.30 0.15 0.76 5.08 2.00 1.91 0.05 MAX .185 .155 .012 .060 .220 .096 .087 .008 MAX 4.70 3.94 0.31 1..52 5.59 2.44 2.21 0.203 NOTE 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. 2. Forward Current @ 200mA. 3. Mounted on 5.0mm (1oz thick) Iand areas. SUGGESTED SOLDER PAD LAYOUT 0.106" 2 o Lead temperature at TL=75 C 0.083” 0.050” www.mccsemi.com Revision: A 1 of 4 2018/01/01 MCC Micro Commercial Components ELECTRICAL CHARACTERISTICS(TL=30 centigrade unless otherwise noted) (VF=1.5Volts Max @IF=200mAdc for all types. MCC PART NUMBER 3SMBJ5913B 3SMBJ5914B 3SMBJ5915B 3SMBJ5916B 3SMBJ5917B ZENER VOLTAGE VZ (*) TEST CURRENT IZT MAXIMUM DYNAMIC IMPEDANCE ZZT @IZT VOLTS 3.3 3.6 3.9 4.3 4.7 mA 113.6 104.2 96.1 87.2 79.8 OHMS 10 9 7.5 6 5 KNEE KNEE CURRENT IMPEDANCE IZK ZZK mA 1 1 1 1 1 OHMS 500 500 500 500 500 MAXIMUM REVERSE CURRENT IR REVERSE VOLTAGE VR DEVICE MARKING µA 100 75 25 5 5 VOLTS 1 1 1 1 1.5 H13B H14B H15B H16B H17B * TOLERANCE AND VOLTAGE DESIGNATION Tolerance designation - The type numbers listed indicate a tolerance of +/-5% Revision: A www.mccsemi.com 2 of 4 2018/01/01 R MCC R Micro Commercial Components RATING AND CHARACTERISTICS CURVES 8 VZ, TEMPERATURE COEFFICIENT(mV/C) PD, MAXIMUM POWER DISSIPATION (WATTS) 3 2.5 2 1.5 1 0.5 0 VZ@IZT 6 4 2 0 -2 -4 20 40 60 80 100 120 120 150 150 3 4 6 TL, LEAD TEMPERATURE (C ) 10 12 VZ, ZENER VOLTAGE (VOLTS) Fig. 2-ZENER VOLTAGE-3.3 TO 4.7 VOLTS Fig. 1-STEADY STATE POWER DERATING POWER 1K 200 IZ (dc) = 1mA 100 70 50 PPK, PEAK SURGE (WATTS) ZZ, DYNAMIC IMPEDANCE (OHMS) 8 30 20 10mA 10 7 5 3 2 5 20mA 7 10 IZ (ms) = 0.1 IZ (dc) 20 30 50 70 500 300 100 50 30 20 10 .1 100 RECTANGULAR NONREPETITIVE WAVEFORM TJ = 25 C PRIOR TO INITIAL PULSE 200 .2 .3 5 1 2 3 5 10 20 50 100 PW, PULSE WIDTH(ms) VZ, ZENER VOLTAGE (VOLTS) Fig. 4-PULSE RATING CURVE Fig. 3-EFFECT OF ZENER VOLTAGE www.mccsemi.com Revision: A 3 of 4 2018/01/01 MCC R Micro Commercial Components Ordering Information Device Packing (Part Number)-TP Tape&Reel;3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: A www.mccsemi.com 4 of 4 2018/01/01 1