BC857B-TP

BC857A,BC857B,BC857C Features • • • • For Switching and AF Amplifier Applications Halogen Free Available Upon Request By Adding Suffix "-HF" Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant ("P" Suffix Designates RoHS Compliant. See Ordering Information) PNP Small Signal Transistor Maximum Ratings • • • • SOT-23 Operating Junction Temperature Range: -55℃ to +150℃ Storage Temperature Range: -55℃ to +150℃ A Thermal Resistance: 320℃/W Junction to Solder-point (Note1) Thermal Resistance: 403℃/W Junction to Ambient (Note1) D C Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Peak Collector Current Peak Emitter Current Power Dissipation TS=50℃ (Note1) Symbol VCBO VCEO VEBO IC ICM IEM PD Rating -50 -45 -5 -100 -200 -200 310 Unit V V V mA mA mA mW Note: 1. Package Mounted 1.0*1.0mm Pad Layout 1oz Copper That is On a Single-sided FR4 PCB. Part Number Marking BC857A 3E BC857B 3F BC857C 3G Internal Structure F B E H G J L K DIMENSIONS INCHES MM DIM MIN MAX MIN MAX A 0.110 0.120 2.80 3.04 B 0.083 0.104 2.10 2.64 C 0.047 0.055 1.20 1.40 0.034 0.041 0.85 1.05 D E 0.067 0.083 1.70 2.10 F 0.018 0.024 0.45 0.60 G 0.0004 0.006 0.01 0.15 H 0.035 0.043 0.90 1.10 J 0.003 0.007 0.08 0.18 K 0.014 0.020 0.35 0.51 L 0.007 0.020 0.20 0.50 NOTE Suggested Solder Pad Layout C 0.031 0.800 B 0.035 0.900 E 0.079 2.000 0.037 0.950 Rev.3-1-01012019 1/4 inches mm 0.037 0.950 MCCSEMI.COM BC857A,BC857B,BC857C Electrical Characteristics @ 25°C Unless Otherwise Specified Parameter Collector-Base Breakdown Voltage(Note2) Collector-Emitter Breakdown Voltage(Note2) Emitter-Base Breakdown Voltage (Note2) Collector-Cutoff Current DC Current Gain (Note2) (Note2) Small Signal Current Gain Input Impedance Output Admittance Reverse Voltage Transfer Ratio Symbol V(BR)CBO V(BR)CEO V(BR)EBO ICES BC857 A BC857 B BC857 C BC857 A BC857 B BC857 C BC857 A BC857 B BC857 C BC857 A BC857 B BC857 C BC857 A BC857 B BC857 C hFE hie hoe hre Base-Emitter Saturation Voltage (Note2) VBE(sat) Noise Figure 125 220 420 hfe VCE(sat) Current Gain-Bandwidth Product Collector-Base Capacitance Typ ICBO Collector-Emitter Saturation Voltage (Note2) Base-Emitter Voltage (Note2) Min -50 -45 -5 VBE fT -600 100 180 290 520 200 330 600 2.7 4.5 8.7 18 30 60 1.5x10-4 2x10-4 3x10-4 -75 -250 -700 -850 -650 CCBO 200 3 NF 2 Max -15 -15 -4 250 475 800 Units V V V nA nA µA µS -750 -820 10 VCE=-50V VCB=-30V VCB=-30V, TA=150℃ VCE=-5Vdc, IC=-2mA KΩ -300 -650 Conditions IC=-10µA, IE=0 IC=-10mA, IB=0 IE=-1µA, IC=0 mV mV mV mV mV mV MHz pF dB VCE=-5V IC=-2mA f=1KHz IC=-10mA, IB=-0.5mA IC=-100mA, IB=-5mA IC=-10mA, IB=-0.5mA IC=-100mA, IB=-5mA VCE=-5V, IC=-2mA VCE=-5V, IC=-10mA VCE=-5V, IC=-10mA, f=100MHz VCB=-10V, f=1MHz VCE=-5V, IC=-200µA RS=2KΩ, f=1KHz, Δf=200Hz Note: 2. Short Duration Pulse Test to Minimize Self-heating Effect. Rev.3-1-01012019 2/4 MCCSEMI.COM BC857A,BC857B,BC857C Curve Characteristics Fig. 2 - DC Current Gain Characteristics Fig. 1 - Static Characteristics -8 Common Emitter TA=25°C -30μA -24μA -21μA -18μA -4 Common Emitter VCE= - 5V TA=100°C -27μA -6 DC Current Gain Collector Current (mA) 1000 -15μA -12μA TA=25°C 100 -9μA -2 -6μA IB=-3μA -0 -0 -2 -4 -6 10 -0.1 -8 -1 Collector-Emitter Voltage (V) -2000 Base-Emitter Saturation Voltage (mV) Collector-Emitter Saturation Voltage (mV) -100 Fig. 4 - Base-Emitter Saturation Voltage Characteristics Fig. 3 - Collector-Emitter Saturation Voltage Characteristics -1000 -100 TA=100°C TA=25°C -1000 TA=25°C TA=100°C β=20 -10 -0.1 -1 -10 β=20 -100 -0.1 -100 -1 Collector Current (mA) Fig. 5 - Base-Emitter Voltage Characteristics -0.1 -0.0 Collector Power Dissipation (mW) TA=100°C TA=25°C -1 -0.3 -0.6 -0.9 -1.2 Base-Emitter Voltage (V) Rev.3-1-01012019 -100 Fig. 6 - Collector Power Derating Curve 400 Common Emitter VCE= - 5V -10 -10 Collector Current (mA) -100 Collcetor Current (mA) -10 Collector Current (mA) 300 200 100 0 0 25 50 75 100 125 150 Ambient Temperature (°C) 3/4 MCCSEMI.COM BC857A,BC857B,BC857C Ordering Information Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 4/4 MCCSEMI.COM