ER1VG

MCC Features
  omponents 21201 Itasca Street Chatsworth    !"# $ %    !"# ER1VG • • • • • • • • • For Surface Mount Applications Extremely Low Thermal Resistance High Temp Soldering: 250°C for 10 Seconds At Terminals Super Fast Recovery Times For High Efficiency Gull Wing Lead Bend To Prevent Arcing Perfect For Ballast, Television And Monitor Applications 1 Amp Super Fast Recovery Silicon Rectifier 1400 Volts DO-215AA (SMBG) (Round Lead) H Cathode Band Maximum Ratings Operating Temperature: -50°C to +150 °C Storage Temperature: -50°C to +150 °C Maximum Thermal Resistance; 15°C/W Junction To Lead Maximum Recurrent Peak Reverse Voltage 1400V Maximum RMS Voltage 980V Maximum DC Blocking Voltage 1400V MCC Part Number ER1VG Device Marking ER1V J A C Electrical Characteristics @ 25° C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage IF(AV) IFSM 1.0A 30A TJ = 55°C 8.3ms, half sine DIM A B C D E F G H J E F G DIMENSIONS INCHES MIN .075 .078 .002 --.015 .065 .245 .160 .130 MAX .116 .087 .008 .02 .03 .084 .276 .180 .151 D B VF Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time 2.2V 5µA 30µA IFM = 1.0A; TJ = 25°C* TJ = 25°C TJ = 125°C MM MIN 1.90 1.98 .05 --.38 1.65 6.22 4.06 3.30 MAX 2.95 2.21 .20 .51 .76 2.13 7.00 4.57 3.83 NOTE IR SUGGESTED SOLDER PAD LAYOUT 0.190” Trr Typical Junction Capacitance CJ 100ns 45pF IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V 0.125” *Pulse test: Pulse width 200 µsec, Duty cycle 2% 0.070” www.mccsemi.com