MCC
TM
Micro Commercial Components
omponents 20736 Marilla Street Chatsworth !"# $
% !"#
FR301GP THRU FR307GP
3 Amp Fast Recovery Rectifier 50 to 1000 Volts
DO-201AD
Features
• • •
•
• • • •
Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information)
Low Forward Voltage Drop and High Current Capability Fast Switching Speed For High Efficiency Glass Passivated Junction
Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1
Maximum Ratings
MCC Catalog Number FR301GP FR302GP FR303GP FR304GP FR305GP FR306GP FR307GP Device Marking
Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Maximum Reccurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V IF(AV) IFSM 3A 150A Maximum RMS Voltage 35V 70V 40V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V
D
FR301GP FR302GP FR303GP FR304GP FR305GP FR306GP FR307GP
A Cathode Mark B
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time FR301GP-304GP FR305GP FR306GP-307GP Typical Junction Capacitance TA = 55°C 8.3ms, half sine IFM = 3.0A; TA = 25°C
D
C
VF
1.3V 5µA 100µA
DIMENSIONS
IR
TA = 25°C TA = 55°C
DIM A B C D
INCHES MIN .287 .189 .048 1.000
MAX .374 .208 .052 ---
MM MIN 7.30 4.80 1.20 25.40
MAX 9.50 5.30 1.30 ---
NOTE
Trr
CJ
150ns 250ns 500ns 50pF
IF=0.5A, IR=1.0A, Irr=0.25A Measured at 1.0MHz, VR=4.0V
Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7.
www.mccsemi.com
Revision: A
1 of 4
2011/01/01
FR301GP thru FR307GP
Figure 1 Typical Forward Characteristics 20 10 6 4 2.5 2 Amps 1 .6 .4 .2 .1 .06 .04 .02 .01 .4 .6 .8 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts 1.0 1.2 1.4 0 .5 Amps 1.0 25°C 3.0 Figure 2 Forward Derating Curve
MCC
TM
Micro Commercial Components
2.0
1.5
Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 50 75 100 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C 125 150 175
Figure 3 Junction Capacitance
100 60 40 20 pF 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 TJ=25°C
Junction Capacitance - pFversus Reverse Voltage - Volts
www.mccsemi.com
Revision: A
2 of 4
2011/01/01
FR301GP thru FR307GP
Figure 4 Peak Forward Surge Current 150 125 100 75 Amps 50 25 0 1 4 6 8 10 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles 20 40 60 80 100
MCC
Micro Commercial Components
TM
2
Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A
0 25Vdc Pulse Generator Note 2 1Ω Oscilloscope Note 1 -0.25
-1.0 1cm Set Time Base for 20/100ns/cm
Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive
www.mccsemi.com
Revision: A
3 of 4
2011/01/01
MCC
Micro Commercial Components
TM
Ordering Information :
Device
Part Number-TP Part Number-AP Part Number-BP
Packing
Tape&Reel: 1.2Kpcs/Reel Ammo Packing: 1.2Kpcs/Ammo Box Bulk: 12Kpcs/Carton
***IMPORTANT NOTICE* **
Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
www.mccsemi.com
Revision: A
4 of 4
2011/01/01
很抱歉,暂时无法提供与“FR301GP_11”相匹配的价格&库存,您可以联系我们找货
免费人工找货