FR3A_11

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# FR3A THRU FR3M 3 Amp Fast Recovery Silicon Rectifier 50 to 1000 Volts DO-214AB (SMC) (LEAD FRAME) G Features • • • • • • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Easy Pick And Place High Temp Soldering: 260 °C for 10 Seconds At Terminals Fast Recovery Times For High Effieciency Maximum Ratings • • • Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C Maximum Thermal Resistance; 10 °C/W Junction To Lead Device Marking Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V MCC Catalog Number FR3A FR3B FR3D FR3G FR3J FR3K FR3M H FR3A FR3B FR3D FR3G FR3J FR3K FR3M D A C E B F DIMENSIONS INCHES MIN .079 .108 .002 .006 .030 ..305 .260 .220 MM MIN 2.00 2.75 0.051 0.152 0.76 7.75 6.60 5.59 Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward IF(AV) 3.0A TJ = 120°C Current Peak Forward Surge IFSM 100A 8.3ms, half sine Current Maximum 1.30V IFM = 3.0A; Instantaneous VF Forward Voltage TJ = 25°C* Maximum DC Reverse Current At IR 10µA TJ = 25°C Rated DC Blocking 250µA TJ = 100°C Voltage Maximum Reverse Recovery Time 150ns IF=0.5A, IR=1.0A, FR3A-G Trr 250ns Irr=0.25A FR3J 500ns FR3K-M Typical Junction CJ 80pF Measured at Capacitance 1.0MHz, VR=4.0V *Pulse test: Pulse width 200 µsec, Duty cycle 2% Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. DIM A B C D E F G H MAX .103 .128 .008 .012 .050 .320 .280 .245 MAX 2.62 3.25 0.203 0.305 1.27 8.13 7.11 6.22 NOTE SUGGESTED SOLDER PAD LAYOUT 0.190 0.125” 0.070” www.mccsemi.com Revision: A 1 of 4 2011/01/01 FR3A thru FR3M Figure 1 Typical Forward Characteristics 100 60 40 3.0 20 2.5 10 6 4 25°C Amps 2 1 .6 .4 .2 .1 .06 .04 .02 .01 .4 .6 .8 1.0 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts 125 100 75 Amps 50 25 0 1 4 6 8 10 1.2 1.4 1.6 .5 1.5 Amps 1.0 2.0 Figure 2 Forward Derating Curve MCC TM Micro Commercial Components Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 40 60 80 100 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C 120 140 160 Figure 3 Peak Forward Surge Current 150 2 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles www.mccsemi.com Revision: A 2 of 4 2011/01/01 FR3A thru FR3M Figure 4 Typical Reverse Characteristics 1000 600 400 200 100 60 40 20 µ Amps 10 6 4 2 1 .6 .4 .2 .1 20 40 60 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes ersus v Percent Of Rated Peak Reverse Voltage - Volts Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 100 120 140 TA=25°C TA=75°C TA=100°C MCC TM Micro Commercial Components 0 25Vdc Pulse Generator Note 2 1Ω Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.mccsemi.com Revision: A 3 of 4 2011/01/01 MCC TM Micro Commercial Components Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01