FR3DB

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# FR3AB THRU FR3MB 3 Amp Fast Recovery Silicon Rectifier 50 to 1000 Volts DO-214AA (SMB) (LEAD FRAME) A Features • • • • • • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Easy Pick And Place High Temp Soldering: 260 °C for 10 Seconds At Terminals\ Fast Recovery Times For High Effieciency Maximum Ratings • • • Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C Maximum Thermal Resistance; 10 °C/W Junction To Lead MCC Catalog Number FR3AB FR3BB FR3DB FR3GB FR3JB FR3KB FR3MB Device Marking Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V B FR3AB FR3BB FR3DB FR3GB FR3JB FR3KB FR3MB C F H D G E Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward IF(AV) 3.0A TJ = 120°C Current Peak Forward Surge IFSM 100A 8.3ms, half sine Current Maximum VF 1.30V IFM = 3.0A; Instantaneous Forward Voltage TJ = 25°C* Maximum DC Reverse Current At IR 10µA TJ = 25°C Rated DC Blocking 250µA TJ = 100°C Voltage Maximum Reverse Recovery Time 150ns IF=0.5A, IR=1.0A, FR3AB-GB Trr 250ns Irr=0.25A FR3JB 500ns FR3KB-MB Typical Junction 80pF Measured at CJ 1.0MHz, VR=4.0V Capacitance *Pulse test: Pulse width 200 µsec, Duty cycle 2% Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. DIM A B C D E F G H INCHES MIN .160 .130 .006 .030 .200 .079 .075 .002 MAX .185 .155 .012 .060 .220 .103 .087 .008 DIMENSIONS MM MIN 4.06 3.30 0.15 0.76 5.08 2.01 1.91 0.05 MAX 4.70 3.94 0.31 1 ..52 5.59 2.62 2.21 0.203 NOTE SUGGESTED SOLDER PAD LAYOUT 0.106 0.083” 0.050” www.mccsemi.com Revision: A 1 of 4 2011/01/01 FR3AB thru FR3MB Figure 1 Typical Forward Characteristics 100 60 40 3.0 20 10 6 4 25°C Amps 2 1 .6 .4 .2 .1 .06 .04 .02 .01 .4 .6 .8 1.0 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts 125 100 75 Amps 50 25 0 1 2 4 6 8 10 1.2 1.4 1.6 .5 1.5 Amps 1.0 2.5 Figure 2 Forward Derating Curve MCC TM Micro Commercial Components 2.0 Single Phase, Half Wave 60Hz Resistive or Inductive Load 40 60 80 100 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C 120 140 160 0 Figure 3 Peak Forward Surge Current 150 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles www.mccsemi.com Revision: A 3 of 4 2011/01/01 FR3AB thru FR3MB Figure 4 Typical Reverse Characteristics 1000 600 400 200 100 60 40 20 µAmps 10 6 4 2 1 .6 .4 .2 .1 20 40 60 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes ersus v Percent Of Rated Peak Reverse Voltage - Volts Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 100 120 140 TA=25°C TA=75°C TA=100°C MCC Micro Commercial Components TM 0 25Vdc Pulse Generator Note 2 1Ω Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.mccsemi.com Revision: A 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel: 3Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01