FR8J

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# FR8J Features • • • • Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) Fast Switching Speed For High Efficiency Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Marking : Cathode band and type number 8 Amp Fast Recovery Rectifier 600 Volts DO-214AB (HSMC) (Round Lead) H Maximum Ratings • • Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C MCC Part Number FR8J Maximum Recurrent Peak Reverse Voltage 600V Maximum RMS Voltage 420V Maximum DC Blocking Voltage 600V Cathode Band J A C E F G D B Electrical Characteristics @ 25° C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time FR8J IF(AV) 8A TA = 55°C DIMENSIONS IFSM 300A 8.3ms, half sine VF 1.30V IFM = 8.0A; TA = 25°C* DIM A B C D E F G H J INCHES MIN .200 .177 .002 --. 047 .168 .309 .239 .234 MAX .214 .203 .005 .02 .056 .179 . 322 .243 .240 MM MIN 5.08 4. 70 .05 --1. 20 4.27 7.85 6.08 5.95 MAX 5.43 5. 30 .13 .51 1. 42 4.55 8. 18 6.18 6.10 NOTE IR 10µA 50µA TA = 25°C TA = 100°C SUGGESTED SOLDER PAD LAYOUT 0.190 Trr 250ns IF=0.5A, IR=1.0A, Irr=0.25A 0.200” *Pulse Test: Pulse Width 300µsec, Duty Cycle 1% Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7. 0.070” Revision: A w w w.mccsemi.com 1 of 4 2011/01/01 MCC FR8J Figure 1 Typical Forward Characteristics 20 10 6 4 10 12 Figure 2 Forward Derating Curve TM Micro Commercial Components 2 25°C Amps 1 .6 .4 .2 .1 .06 .04 .02 .01 .6 .8 1.0 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Amps 8 6 4 2 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 0 50 75 100 125 150 175 Ambient Temperature °C 1.2 1.4 1.6 Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25°C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pF versus Reverse Voltage - Volts Revision: A www.mccsemi.com 2 of 4 2011/01/01 MCC FR8J Figure 4 Peak Forward Surge Current 300 250 200 150 Amps 100 50 0 1 4 6 8 10 20 40 60 80 100 TM Micro Commercial Components 2 Cycles Peak Forward Surge Current - Amperes versus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω trr +0.5A 0 25Vdc Pulse Generator Note 2 1Ω Oscilloscope Note 1 -0.25 -1.0 Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive 1cm Set Time Base for 20/100ns/cm Revision: A www.mccsemi.com 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel: 1.5Kpcs/Reel ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: A www.mccsemi.com 4 of 4 2011/01/01 3