FRA802G

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# FRA801G THRU FRA807G  )HDWXUHV • • • • • High Reliability High Surge Current Capability Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1 Marking : Type number 8 Amp Glass Passivated Fast Recovery Rectifier 50 to 1000 Volts 0D[LPXP5DWLQJV • • • Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Typical Thermal Resistance: 3.0 oC/W junction to case Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V TO-220AC B C K PIN 1 2 L M D A MCC Part Number FRA801G FRA802G FRA803G FRA804G FRA805G FRA806G FRA807G F G I H J N Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time FRA801G-804G FRA805G FRA806G-807G Typical Junction Capacitance IF(AV) IFSM VF 8A 150A 1.3V 5.0µA 100µA TC = 100°C 8.3ms, half sine IFM = 8.0A TA = 25°C TA = 125°C
 A B C D F G H I J K L M N  PIN 1 PIN 2 CASE
 MM  14.22 9.65 2.54 5.84 -----12.70 4.83 0.51 0.30 3.53 3.56 1.14 2.03  15.88 10.67 3.43 6.86 6.35 14.73 5.33 1.14 0.64 4.09 4.83 1.40 2.92   IR Trr 150ns 250ns 500ns 60pF CJ IF=0.5A, IR=1.0A, IRR=0.25A Measured at 1.0MHz, VR=4.0V INCHES   .560 .625 .380 .420 .100 .135 .230 .270 -----.250 .500 .580 .190 .210 .020 .045 .012 .025 .139 .161 .140 .190 .045 .055 .080 .115 Notes: 1. High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com 1 of 3 Revision: 3 2008/01/01 FRA801G thru FRA807G MCC Micro Commercial Components trr +0.5A (-) TM FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT. (A) 10 8 6 4 2 0 400 200 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT. (A) 100 40 20 10 Tj=25oC Pulse Width=300 s 1% Duty Cycle 4 2 1 0 50 CASE TEMPERATURE. ( C) o 100 150 PEAK FORWARD SURGE CURRENT. (A) 150 125 FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 0.4 0.2 TJ=125 C 0 100 8.3ms Single Half Sine Wave JEDEC Method 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE. (V) 75 FIG.6- TYPICAL REVERSE CHARACTERISTICS 50 100 25 0 40 INSTANTANEOUS REVERSE CURRENT. ( A) 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz Tj=125 0C FIG.4- TYPICAL JUNCTION CAPACITANCE 120 10 4 2 1 Tj=75 0C CAPACITANCE.(pF) 100 80 60 40 20 0 0.1 0.5 1 5 10 50 100 500 1000 REVERSE VOLTAGE. (V) Tj=25 0C f=1.0MHz Vsig=50mVp-p 0.4 0.2 0.1 Tj=25 0C 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) www.mccsemi.com 2 of 3 Revision: 3 2008/01/01 MCC Device TM Micro Commercial Components Ordering Information Packing Bulk;1Kpcs/Box (Part Number)-BP ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 3 3 of 3 2008/01/01