FSM15PL-TP

FSM11PL THRU FSM17PL Features • For Surface Mount Application • Fast Recovery Time For High Efficiency • Glass Passivated Junction • Epoxy Meets UL 94 V-0 Flammability Rating • Halogen Free Available Upon Request By Adding Suffix "-HF" • Moisture Sensitivity Level 1 • Lead Free Finish/RoHS Compliant(Note 1)("P" Suffix Designates Compliant. See Ordering Information) 1.0 Amp Fast Recovery Rectifier 50 to 1000 Volts Maximum Ratings • Operating Junction Temperature Range: -65°C to +150°C • Storage Temperature Range: -65°C to +150°C • Maximum Thermal Resistance: 75°C/W Junction to Ambient(Note 2) MCC Part Number Device Marking FSM11PL FSM12PL FSM13PL FSM14PL FSM15PL FSM16PL FSM17PL F1 F2 F3 F4 F5 F6 F7 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 140V 280V 420V 560V 700V 50V 100V 200V 400V 600V 800V 1000V SOD-123FL A B C E Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 1.0A TL=110⁰C Peak Forward Surge Current IFSM 30A 8.3ms,Half Sine Maximum Instantaneous Forward Voltage VF Maximum DC Reverse Current At Rated DC Blocking Voltage IR 1.30V TJ=25⁰C 1.0μA TJ=25⁰C; 100μA TJ=125⁰C Maximum Reverse Recovery Time FSM11PL~FSM14PL FSM15PL FSM16PL~FSM17PL IFM=1.0A; DIM A B C D E G H DIMENSIONS INCHES MM MIN MAX MIN MAX 0.130 0.152 3.30 3.85 0.100 0.122 2.55 3.10 0.055 0.075 1.40 1.90 0.035 0.053 0.90 1.35 0.020 0.041 0.50 1.05 0.010 ---0.25 ------- 0.010 ---0.25 NOTE Suggested Solder Pad Layout trr 150ns 250ns IF=0.5A; IR=1.0A; Irr=0.25A 2.36mm 500ns 1.22mm Typical Junction Capacitance CJ 15pF Measured at 1.0MHz VR=4.0V 0.91mm Note:1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a. 2. 6.0mm2 Copper Pads To Each Terminal Rev.3-2-11012019 1/3 MCCSEMI.COM FSM11PL THRU FSM17PL Curve Characteristics 1.2 35 1.0 30 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 0.8 0.6 0.4 0.2 0.0 Resistive or Inductive Load 0 25 50 75 100 125 25 20 15 10 8.3 ms Single Half Sine-Wave 5 0 150 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 10 1 Lead Temperature (°C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Characteristics 100 Instantaneous Reverse Current (μA) Instantaneous Forward Current (A) 10 1 0.1 TJ=25°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Rev.3-2-11012019 100 10 TJ=125°C TJ=75°C 1 TJ=25°C 0.1 0.01 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM FSM11PL THRU FSM17PL Ordering Information Device Packing Part Number-TP Tape&Reel: 2.5Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-11012019 3/3 MCCSEMI.COM