GP02-40

MCC Features • • • •
  omponents 21201 Itasca Street Chatsworth    !"# $ %    !"# GP02-35 THRU GP02-60 0.2 Amp High Voltage Silicon Rectifier 3500 - 6000 Volts DO-15 AVALANCHE OPERATION UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOND BEVELED ROUND CHIP LOW COST • • • Maximum Ratings Operating J unct ion Temperature -55 °C to +125 °C Storage Temperature: - 55°C to +150°C Maximum Thermal Resistance : 50°C/W Junction To Ambinet (NOTE1) Microsemi Catalog Number Device Marking Maximum Recurrent Peak Reverse Voltage 3500V 4000V 5000V 6000V Maximum RMS Voltage Maximum DC Blocking Voltage 3500V 4000V 5000V 6000V D GP02-35 GP02-40 GP02-50 GP02-60 GP02-35 GP02-40 GP02-50 GP02-60 2450V 2800V 3500V 4200V A Cathode Mark B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current GP02-35~40 GP02-50~60 D IF(AV) 0.2A TA = 55 °C C IFSM 25 A 20 A 8.3ms, half sine Maximum Instantaneous Forward Voltage GP02-35~40 GP02-50~60 DIMENSIONS VF 5.0 V 7.0 V 5.0 µA 50 µA IFM = 0.2A; TJ = 25°C TA = 25°C TA = 100°C Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance GP02-35~40 GP02-50~60 IR DIM A B C D INCHES MIN .230 .104 .026 1.000 MAX .300 .140 .034 --- MM MIN 5.80 2.60 .70 25.40 MAX 7.60 3.60 .90 --- NOTE CJ 7 pF 5 pF Measured at 1.0MHz, VR=4.0V NOTE: 1. BOTH LEADS ATTATCHED TO HEATSINK 20* 20* 1t(mm) COPPER PLATE AT LEAD LENTH 5mm www.mccsemi.com GP02-35 THRU GP02-60 RATINGS AND CHARACTERISTICS CURVES MCC IO-PERCENT OF AVERAGE RECTIFIED CURRENT (%) FIG. 1 MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD A=20□mm 100 80 60 40 20 0 0 COPPER AREA 5.5!mm PC BOARD 10mm 10mm A=10 mm A=5.5 mm □ □ 20 40 60 80 100 120 140 TA-AMBIENT TENMPERATURE (℃) FIG. 4TYPICAL REVERSE CHARCTERISTICS AT TJ=25℃ 10 100 80 60 40 20 0 10mm PK AV RESISTIVE/INDUCTIVE LOADS 5 10 20 CAPACTIVE LOADS INSTANTANEOUS REVERSE CURRENT MICROAMPERES FIG. 2 MAXIMUM CURRENT RATING CAPACITIVE LOAD, 10mm LEAD LENGTHS IO-PERCENT OF AVERAGE RECTIFIED CURRENT (%) 1.0 0.1 10mm COPPER AREA 5.5!mm PC BOARD .01 0 20 40 60 80 100 120 140 0 20 40 60 80 100 120 140 160 PERCENT OF RATED PEAK REVERSE VOLTAGE FIG. 3 MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE LOAD L=5mm 100 80 60 10mm 10mm L=10mm L=20mm 40 20 0 0 COPPER AREA 5.5!mm PC BOARD 20 40 60 80 100 120 140 160 TA-AMBIENT TENMPERATURE (℃) www.mccsemi.com GP02-35 THRU GP02-60 RATINGS AND CHARACTERISTICS CURVES MCC FORWARD SURGE CURRENT, AMPERES PK (HALF SINE-WAVE) FIG. 5 MAXIMUM FORWARD SURGE VS NUMBER OF CYCLES 30 24 18 12 6 GP02-50~60 GP02-35~40 0 1 10 NO. OF CYCLES AT 60HZ 100 FIG. 6 TYPICAL JUNCTION CAPACITANCE CJ-JUNCTION CAPACITANCE (PF) 10 0 GP02-35~40 1 0 GP02-50~60 1 10 100 1000 VR-REVERSE VOLAGE (V) FIG. 7 TYPICAL FORWARD CHARACTERISTICS IF-FORWARD CURRENT (A) 1 0.1 GP02-35~40 0.01 GP02-45~60 0.001 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 VF-FORWARD VOLAGE (V) www.mccsemi.com