HER303G-AP

HER301G THRU HER308G Features Halogen Free Available Upon Request By Adding Suffix "-HF" Low Forward Voltage Drop Glass Passivated Junction Lead Free Finish/RoHS Compliant(Note 1)("P" Suffix Designates Compliant. See Ordering Information) • • • • 3.0 Amp High Efficient Rectifier 50 to 1000 Volts • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 Maximum Ratings • • • • Operating Junction Temperature Range: -55⁰C to +150⁰C Storage Temperature Range: -55⁰C to +150⁰C Typical Thermal Resistance: 20⁰C/W Junction to Ambiennt Typical Thermal Resistance: 5.6⁰C/W Junction to Lead MCC Part Number Device Marking HER301G HER302G HER303G HER304G HER305G HER306G HER307G HER308G HER301G HER302G HER303G HER304G HER305G HER306G HER307G HER308G DO-201AD Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 50V 35V 50V 100V 70V 100V 200V 140V 200V 300V 210V 300V 400V 280V 400V 600V 420V 600V 800V 560V 800V 1000V 700V 1000V D A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 3.0A TA=55⁰C Peak Forward Surge Current IFSM 125A 8.3ms,Half Sine Maximum Instantaneous Forward Voltage HER301G-304G HER305G HER306G-308G Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance HER301G-305G HER306G-308G Maximum Reverse Recovery Time HER301G-305G HER306G-308G B D VF IR CJ 0.95V 1.3V 1.7V IFM=3.0A; TJ=25⁰C 10μA 200μA TJ=25⁰C; 80pF 50pF Measured at 1.0MHz VR=4.0V 50ns 75ns IF=0.5A; IR=1.0A; Irr=0.25A trr C TJ=100⁰C DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.287 0.374 7.30 9.50 0.189 0.208 4.80 5.30 0.048 0.052 1.20 1.30 1.000 ----- 25.40 ----- NOTE Note :1. High Temperature Solder Exemption Applied,See EU Directive Annex 7a. Rev.3-2-12012020 1/3 MCCSEMI.COM HER301G THRU HER308G Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 25 50 125 100 75 50 25 Resistive or Inductive Load 0 150 8.3 ms Single Half Sine-Wave 75 100 125 0 150 10 1 1000 Number of Cycles at 60 Hz Ambient Temperature (°C) Fig. 4 - Typical Reverse Leakage Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics 100 Instantaneous Reverse Leakage Current (μA) 100 Instantaneous Forward Current (A) 100 HER301G-HER304G 10 HER306G-HER308G 1 HER305G 0.1 0.01 0.4 TJ=25°C 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Instantaneous Forward Voltage (V) Rev.3-2-12012020 TJ=125°C 10 TJ=75°C 1 TJ=25°C 0.1 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM HER301G THRU HER308G Ordering Information Device Packing Part Number-TP Tape&Reel: 1.2Kpcs/Reel Part Number-AP Ammo Packing: 1.2Kpcs/Ammo Box Part Number-BP Bulk:500pcs/Box,12Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-12012020 3/3 MCCSEMI.COM