HER503GP-TP

HER501GP THRU HER508GP Features • • • • Halogen Free Available Upon Request By Adding Suffix "-HF" Low Forward Voltage Drop Glass Passivated Junction Lead Free Finish/RoHS Compliant(Note 1)("P" Suffix Designates Compliant. See Ordering Information) • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 5.0 Amp High Efficient Rectifier 50 to 1000 Volts Maximum Ratings • • • • • Operating Junction Temperature Range: -55⁰C to +150⁰C Storage Temperature Range: -55⁰C to +150⁰C Typical Thermal Resistance: 50⁰C/W Junction to Ambient Typical Thermal Resistance: 25⁰C/W Junction to Lead Typical Thermal Resistance: 5.0⁰C/W Junction to Case MCC Part Number Device Marking HER501GP HER502GP HER503GP HER504GP HER505GP HER506GP HER507GP HER508GP HER501GP HER502GP HER503GP HER504GP HER505GP HER506GP HER507GP HER508GP DO-201AD Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 50V 35V 50V 100V 70V 100V 200V 140V 200V 300V 210V 300V 400V 280V 400V 600V 420V 600V 800V 560V 800V 1000V 700V 1000V D A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) 5.0A TC=108⁰C Peak Forward Surge Current IFSM 160A 8.3ms,Half Sine 1.0V 1.3V 1.7V IFM=5.0A; TJ=25⁰C 5μA TJ=25⁰C 100pF 60pF Measured at 1.0MHz VR=4.0V 50ns 75ns IF=0.5A; IR=1.0A; Irr=0.25A Maximum Instantaneous Forward Voltage HER501GP-503GP HER504GP-505GP HER506GP-508GP Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance HER501GP-505GP HER506GP-508GP Maximum Reverse Recovery Time HER501GP-505GP HER506GP-508GP VF IR CJ trr B D C DIM A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.287 0.374 7.30 9.50 0.189 0.208 4.80 5.30 0.048 0.052 1.20 1.30 1.000 ----- 25.40 ----- NOTE Note :1. High Temperature Solder Exemption Applied,See EU Directive Annex 7a. Rev.3-3-12012020 1/3 MCCSEMI.COM HER501GP THRU HER508GP Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 200 6 Peak Forward Surge Current (A) Average Forward Current (A) 5 4 3 2 1 0 Resistive or Inductive Load 0 25 50 75 100 125 160 120 80 40 8.3 ms Single Half Sine-Wave 0 150 1 Fig. 4 - Typical Reverse Leakage Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics 100 HER501GP-HER503GP 10 HER506GP-HER508GP 1 HER504GP-HER505GP Rev.3-3-12012020 TJ=25°C 0.6 0.8 1.0 1.2 Instantaneous Forward Voltage (V) 1.4 1.6 2/3 Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) 100 0.1 0.4 100 10 Number of Cycles at 60 Hz Case Temperature (°C) TJ=125°C 10 TJ=75°C 1 TJ=25°C 0.1 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) 120 MCCSEMI.COM HER501GP THRU HER508GP Ordering Information Device Packing Part Number-TP Tape&Reel: 1.2Kpcs/Reel Part Number-AP Ammo Packing: 1.2Kpcs/Ammo Box Part Number-BP Bulk:500pcs/Box,12Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-3-12012020 3/3 MCCSEMI.COM