LCE20A

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# LCE6.5A THRU LCE28A 1500Watts Low Capacitance Transient Voltage Suppressor 6.5 to 28 Volts DO-201AE Features Glass passivated junction and Excellent clamping capability Low incremental surge resistance 1500W Peak Pulse Power capability with a 10/1000us waveform Excellent clamping capability UL Recognized File # E331408 Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) • Mechanical Characteristics • • Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Weight: 0.045 ounce, 1.2 grams D Maximum Ratings Operating Temperature: -55 C to +175 C Storage Temperature: -55 C to +175 C For Parts without A , the VBR is + 20% D B o o A Cathode Mark o o Electrical Characteristics @ 25OC Unless Otherwise Specified C Peak Pulse Power Dissipation Peak Power Pules Surger Current Steady State Power Dissi p ation P PPM IPPM P M(AV) 1 500W See the Table 5.0W T A =25 C o DIMENSIONS INCHES MIN ----.038 1.000 MM MIN ----0.96 25.40 T L =75 C o Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. DIM A B C D MAX .370 .250 .042 --- MAX 9.50 6.40 1.06 --- NOTE www.mccsemi.com Version: A 1 of 4 2011/01/01 LCE6.5A thru LCE28A MCC Micro Commercial Components Fig.2-Power Derating Curve 100 Average Power 87.5 75 62.5 50 37.5 25 12.5 Lead Lengths 0.375" (9.5mm) Peak Power (single pulse) TM Fig. 1 - Peak Pulse Power Rating Curve 100 PPPM-Peak Pulse Power (kW) 10 1 0.1 Percentage of Rated Power(%) 0 1.0µs 10µs 100µs 1.0ms 10ms 0 25 50 75 100 125 150 175 0.1µs td - Pulse Width (sec.) TL Lead Temperature (°C) Fig.3 - Pulse Waveform 150 TJ = 25°C Pulse Width (td) is defined as the point where the peak current decays to 50% of IPPM Fig. 4 - AC Line Protection Application tr = 10µsec. IPPM - Peak Pulse Current,% IRSM Peak Value IPPM 100 Low Capacitance TVS Half Value- IPPM 2 50 10/1000µsec.Waveform as defined by R.E.A. td 0 0 1.0 3.0 t - Time(ms) 2.0 3.0 4.0 4.0 Application Note: Device must be used with two units in parallel,opposite in polarity as shown in circuit for AC signal line protection. www.mccsemi.com Version: A 2 of 4 2011/01/01 LCE6.5A thru LCE28A MCC Micro Commercial Components WORKING INVERSE BLOCKING VOLTAGE V WIB (VOLTS) TM STAND- BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM TEST WORKING LCE VOLTAGE CURRENT REVERSE OFF CLAMPING JUNCTION PEAK INVERSE PART CAPACITANCE BLOCKING LEAKAGE VOLTAGE AT AT PULSE NUMBER VOLTAGE V(BR) (VOLTS) AT VWM MIN-MAX VWM Ipp Vc IT(mA) CURRENT AT O VOLTS VOLTAGE (VOLTS) (pF) FIG.3 IPPM V WIB (VOLTS) IR ( µA) UNI-POLAR (AMPS) (VOLTS) PEAK INVERSE BLOCKING VOLTAGE VPIB (VOLTS) LCE6.5A LCE7.0A LCE7.5A LCE8.0A LCE8.5A LCE9.0A LCE10A LCE11A LCE12A LCE13A LCE14A LCE15A LCE16A LCE17A LCE18A LCE20A LCE22A LCE24A LCE26A LCE28A 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 7.22-7.98 7.78-8.60 8.33-9.21 8.89-9.83 9.44-10.40 10.00-11.10 11.10-12.30 12.20-13.50 13.30-14.70 14.40-15.90 15.60-17.20 16.70-18.50 17.80-19.70 18.90-20.90 20.00-22.10 22.20-24.50 24.40-26.90 26.70-29.50 28.90-31.90 31.10-34.40 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1000 500 250 100 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 100 100 100 100 100 97 88 82 75 70 65 61 57 54 51 46 42 39 36 33 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 www.mccsemi.com Version: A 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 1.2Kpcs/Reel Ammo Packing: 1.2Kpcs/Ammo Box Bulk: 12Kpcs/Carton ***IMPORTANT NOTICE* ** Micro Comme rcial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Comme rcial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Co mponents Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from A uthorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC' s quality standards for handling and storage. MCC will not pro vide any warranty coverage or o ther assistance for parts bought from Unau thorized Source s. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Version: A 4 of 4 2011/01/01 3