MBR30150FCT-BP

MBR30150FCT Features • • • • • • • • Low Power Loss, High Efficiency Guardring For Overvoltage Protection Low Forward Voltage Drop And High Frequency Operation For Use in High Frequency Inverters,Free Wheeling And Polarity Protection Applications Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates RoHS Compliant. See Ordering Information) Halogen Free Available Upon Request By Adding Suffix "-HF" Epoxy Meets UL 94 V-0 Flammability Rating Moisture Sensitivity Level 1 30 Amp Schottky Barrier Rectifier 150 Volts Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance Per Leg: 4.0⁰C/W Junction to Case MCC Part Number Device Marking Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage 150V 105V MBR30150FCT MBR30150FCT ITO-220AB Maximum DC Blocking Voltage 150V L M B C D Electrical Characteristics @ 25°C Unless Otherwise Specified Maximum Average Forward Rectified Current Peak Forward Surge Current IF(AV) 30A A (See Fig.1)  IFSM 260A   8.3ms,Half Sine E F Peak Repetitive Reverse Current Per Leg Voltage Rate of Change (Rated VR) IRRM dv/dt VF Maximum Reverse Current Per Leg at Working Peak Reverse Voltage IR VISOL G tp = 2.0us, 1KHz H O I J H Maximum Instantaneous Forward Voltage Per Leg (Note 5) RMS Isolation Voltage (MBRF type only) From Terminals to Heatsink With t = 1.0 Second, RH ≤30% 1.0A K N 10,000V/us 0.90V IF=15A,TC=25⁰C 0.75V IF=15A,TC=125⁰C 0.99V IF=30A,TC=25⁰C 0.86V IF=30A,TC=125⁰C 5.0µA TJ=25⁰C 1.0mA TJ=125⁰C 4500V ( Note 2) 3500V ( Note 3) 1500V ( Note 4) Note :1. High Temperature Solder Exemption Applied, see EU Directive Annex 7a. 2. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset 3. Clip mounting (on case), where leads do overlap heatsink 4. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19") 5. Pulse test: 300us pulse width, 1% duty cycle DIM A B C D E F G H I J K L M N O DIMENSIONS INCHES MM MIN MAX MIN MAX 0.567 0.642 14.40 16.30 ----- 0.421 ----- 10.70 0.085 0.128 2.15 3.25 0.248 0.272 6.30 6.90 ----- 0.177 ----- 4.50 ----- 0.071 ----- 1.80 0.500 0.539 12.70 14.20 0.100 2.55 ----- 0.035 ----- 0.90 ----- 0.032 ----- 0.80 0.102 0.150 2.60 3.80 ----- 0.201 ----- 5.10 ----- 0.140 ----- 3.56 0.083 0.126 2.10 3.20 ----- 0.071 ----- 1.80 NOTE Φ Internal Structure PIN 1 PIN 3 Rev.3-2-12012020 PIN 2 Case 1/3 MCCSEMI.COM MBR30150FCT Curve Characteristics Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 35 300 Peak Forward Surge Current (A) Average Forward Current (A) 30 25 20 15 10 5 250 200 150 100 50 8.3 ms Single Half Sine-Wave 0 0 25 50 75 100 125 150 0 175 10 1 Case Temperature (°C) Fig. 4 - Typical Reverse Leakage Characteristics Fig. 3 - Typical Instantaneous Forward Characteristics 1000 Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) 50 TJ=125°C 20 10 5 2 TJ=75°C 1 0.5 TJ=25°C 0.2 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 TJ=125°C 100 TJ=75°C 10 1 TJ=25°C 0.1 0.01 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) Rev.3-2-12012020 100 Number of Cycles at 60 Hz 2/3 MCCSEMI.COM MBR30150FCT Ordering Information Device Packing Part Number-BP Bulk:50pcs/Tube,1Kpcs/Box,5Kpcs/Carton Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-BP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-12012020 3/3 MCCSEMI.COM