MBRB20200CTH-TP

MBRB20100CTH THRU MBRB20200CTH Features • Halogen Free Available Upon Request By Adding Suffix "-HF" 20 Amp Schottky Barrier Rectifier 100 to 200 Volts • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates Compliant. See Ordering Information) • High Junction Temperature Capability • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 Maximum Ratings • Operating Junction Temperature Range: -55⁰C to +175⁰C • Storage Temperature Range: -55⁰C to +175⁰C • Typical Thermal Resistance : 2.0°C/W Junction to Case MCC Part Number Device Marking D2-PAK Maximum Maximum Maximum DC Recurrent RMS Blocking Peak Reverse Voltage Voltage Voltage MBRB20100CTH MBRB20100CTH 100V 70V 100V MBRB20150CTH MBRB20150CTH 150V 105V 150V MBRB20200CTH MBRB20200CTH 200V 140V 200V S 1 G IF(AV) 20A TC=140°C Peak Forward Surge Current IFSM 150A 8.3ms,Half Sine MBRB20100CTH MBRB20150CTH MBRB20200CTH Maximum DC Reverse Current at Rated DC Blocking Voltage VF IR 0.80V 0.85V 0.90V IF=10A; TA=25⁰C 10μA 2mA TA=25⁰C TA=125⁰C Typical Junction Capacitance MBRB20100CTH MBRB20150CTH MBRB20200CTH CJ 270pF 210pF 160pF Measured at 1.0MHz, VR=4.0V Note :1. High Temperature Solder Exemption Applied, See EU Directive Annex 7a. C H w J A B C D E G H J K S V W 3 Rev.3-2-08272020 E K DIMENSIONS INCHES MM MIN MAX MIN MAX 0.331 0.370 8.40 9.40 0.378 0.417 9.60 10.60 0.165 0.189 4.20 4.80 0.027 0.037 0.68 0.94 0.045 0.055 1.14 1.40 0.010 2.54 0.096 0.134 2.43 3.40 0.011 0.025 0.28 0.64 0.071 0.131 1.80 3.32 0.575 0.625 14.60 15.87 0.042 0.058 1.07 1.47 0.000 0.010 0.00 0.25 NOTE TYP. Suggested Solder Pad Layout .638 16.20 .065 1.65 Inches mm .420 10.66 .070 1.78 Internal Structure: 1 B D DIM Maximum Instantaneous Forward Voltage 4 2 3 Electrical Characteristics @ 25°C Unless Otherwise Specified Average Rectified Forward Current V A .330 8.38 .138 3.50 2,4 HEATSINK 1/3 MCCSEMI.COM MBRB20100CTH THRU MBRB20200CTH Curve Characteristics Curve Characteristics Fig. 1 - Forward Current Derating Curve 30 200 Peak Forward Surge Current (A) Average Forward Current (A) 25 20 15 10 5 0 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 0 20 40 60 80 100 120 140 160 180 150 100 8.3 ms Single Half Sine-Wave 50 0 200 Case Temperature (°C) 1 Fig. 4 - Typical Instantaneous Forward Characteristics 50 50 20 20 Instantaneous Forward Current (A) Instantaneous Forward Current (A) Fig. 3 - Typical Instantaneous Forward Characteristics 10 Ta=25°C =75°C =125°C 5 2 1 0.5 0.2 0.1 0.2 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 10 2 1 0.5 0.1 0.2 1.2 Instantaneous Forward Voltage (V) Fig. 5 - Typical Instantaneous Forward Characteristics 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Fig. 6 - Typical Reverse Leakage Characteristics 100 Instantaneous Reverse Leakage Current (μA) Instantaneous Forward Current (A) MBRB20150CTH Instantaneous Forward Voltage (V) 50 20 10 Ta=25°C =75°C =125°C 5 2 1 0.5 0.2 0.1 0.2 Ta=25°C =75°C =125°C 5 0.2 MBRB20100CTH 0.3 100 10 Number of Cycles at 60 Hz MBRB20200CTH 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Instantaneous Forward Voltage (V) Rev.3-2-08272020 10 Ta=125°C Ta=75°C 1 Ta=25°C 0.1 0.01 0.001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM MBRB20100CTH THRU MBRB20200CTH Ordering Information Device Packing Part Number-TP Tape&Reel: 800pcs/Reel Part Number-BP Tube: 5Kpcs/Ctn Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-2-08272020 3/3 MCCSEMI.COM