MLESD08A-2510

MCC Micro Commercial Components TM
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# MLESD08A-2510 Features • ESD protection for high speed data lines to IEC61000-4-2 ESD contact discharge typical 8KV, max 15KV IEC61000-4-2 ESD air discharge typical 15KV, max 25KV Multilayer structure Surface mount Extremely low capacitance Very low leakage current Fast response time Bi-directional ESD protection Lead free solder termination The best ESD protection for high frequency, low voltage applications Multilayer Polymer ESD Suppressor 2510 • • • • • • • • Application • • • • • • • High Definition Multi-Media Interface (HDMI) Digital Visual Interface (DVI) Display Port Interface Unified Display Interface (UDI) MDDI Ports Gigabit Ethernet USB2.0 and IEEE1394 interface Suggested Solder Pad Layout E G * Caution: This component is designed for signal line protection only, not intended to be used under bias, not for application with a power line. Environmental Specifications • • • • • • Operation temperature: -40~90 Moisture Resistance, Steady state: MIL-STD-833,Method 1004.7, 85% RH,85 ,1000hrs Thermal Shock: MIL-STD-202,Method 107G,-55 to150 ,30 min cycle,10 cycles. Vibration: MIL-STD-202F, Method 201A, (10 to 55 to 10HZ, 1 min. cycle, 2hrs each in X-Y-Z) Chemical Resistance: ASTM D-543, 4hrs @40 , 3 solutions(H2O, detergent solution, deluxer ) F K J H I DIMENSIONS Solder leach resistance and terminal adhesion: Per EIA-576 test DIM A B C D E F G H I J K INCHES MIN MAX .096 .100 .035 .043 . 013 . 017 .010 .018 .00 8 . 0 12 .022 .026 .014 .018 .018 .022 .018 .022 .014 .010 .055 .063 MM MIN 2.45 0.90 0.33 0.25 0.2 0 0.55 0.35 0.45 0.45 0.25 1.40 MAX 2.55 1.10 0.43 0.45 0.3 0 0.65 0.45 0.55 0.55 0.35 1.60 NOTE Revision: 1 www.mccsemi.com 1 of 6 2009/01/01 MLESD08A-2510 Electrical Characteristics Electrical Characteristics MCC Micro Commercial Components TM Parameter Symbol Conditions Min Typ Max Units Continuous operating voltage VDC --- --- --- 8 V Trigger voltage VT IEC61000-4-2 8KV contact discharge --- 300 --- V Clamping voltage VC IEC61000-4-2 8KV contact discharge --- 15 --- V Leakage current IL 8V VDC --- 0.10 10 nA Capacitance CP VR = 0V, f = 1MHz --- 0.15 0.3 pF Operating Temperature --- --- -40 --- 90 Storage Temperature --- --- -55 --- 150 ESD pulse withstand Pulses IEC61000-4-2 8KV contact discharge 2000 --- --- --- Notes: 1, Trigger and clamping voltage measure per IEC 61000-4-2, 8KV contact discharge method Typical MLESD clamping for +8KV pulse per IEC61000-4-2 Revision: 1 www.mccsemi.com 2 of 6 2009/01/01 MLESD08A-2510 MC C Micro Commercial Components TM Design Recommendations for HDMI For HDMI Source Device MLESD08A-2510 For HDMI Sink Device MLESD08A-2510 Revision: 1 www.mccsemi.com 3 of 6 2009/01/01 MLESD08A-2510 Design Recommendations for Display Port For Display Port Source Device MC C Micro Commercial Components MLESD08A-2510 TM For Display Port Sink Device MLESD08A-2510 Revision: 1 www.mccsemi.com 4 of 6 2009/01/01 MLESD08A-2510 Eye Pattern Test MC C Micro Commercial Components TM HDMI Port lane was protected with MLESD08A-2510, tested for 2.25G bps HDMI Port without MLESD08A-2510 HDMI Port with MLESD08A-2510 Circuit diagram Pin configuration Pin 1, 2, 4, 5 6, 7, 9,10 3, 8 Identification Input lines Output lines Ground Revision: 1 www.mccsemi.com 5 of 6 2009/01/01 MCC Micro Commercial Components TM Ordering Information Device (Part Number)-TP Packing Tape&Reel;3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. Revision: 1 www.mccsemi.com 6 of 6 2009/01/01 3