MMBT2907A_11

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# M MBT2907A Features • • Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Capable of 350mWatts of Pd, 600mA continuous collector current. Operating and Storage Junction Temperatures: -55 to 150 C • • Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 Pin Configuration Marking : 2F Top View Thermal Tesistance,Junction to Ambient:500oC/W Symbol Parameter Collector-Emitter Breakdown Voltage* (I C=10mAdc, IB=0) Collector-Base Breakdown Voltage (I C=10µ Adc, IE=0) Emitter-Base Breakdown Voltage (I E=10µ Adc, IC=0) Base Cutoff Current (VCE=30Vdc, VBE=0.5Vdc) Collector Cutoff Current (VCE=30Vdc, VBE=0.5Vdc) Collector Cutoff Current (VCB=50Vdc, IE=0) (VCB=50Vdc, IE=0, TA=150°C) DC Current Gain* (I C=0.1mAdc, VCE=10Vdc) (I C=1.0mAdc, VCE=10Vdc) (I C=10mAdc, VCE=10Vdc) (I C=150mAdc, VCE=10Vdc) (I C=500mAdc, VCE=10Vdc) Collector-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Base-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Current Gain-Bandwidth Product (I C=50mAdc, VCE=20Vdc, f=100MHz) Output Capacitance (VCB=10Vdc, IE=0, f=1.0MHz) Input Capacitance (VEB=2.0Vdc, IC=0, f=1.0MHz) Delay Time (VCC=3.0Vdc, IC=150mAdc, Rise Time IB1=15mAdc) Storage Time (VCC=3.0Vdc, IC=150mAdc Fall Time IB1=IB2=15mAdc) ≤ 300µ s, Duty Cycle ≤ 2.0% Min 60 60 5.0 50 50 B PNP General Purpose Amplifier SOT-23 A D • E Electrical Characteristics @ 25°C Unless Otherwise Specified Max Units Vdc OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX ICBO C B Vdc Vdc nAdc nAdc µAdc G H J F E 0.1 10.0 K DIMENSIONS INCHES MIN .110 .083 .047 .035 .070 .018 .0005 .035 .003 .015 MM MAX .120 .098 .055 .041 .081 .024 .0039 .044 .007 .020 MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE ON CHARACTERISTICS hFE 75 100 100 100 50 DIM A B C D E F G H J K 300 VCE(sat) 0.4 1.6 1.3 2.6 Vdc VBE(sat) Vdc Suggested Solder Pad Layout .031 .800 SMALL-SIGNAL CHARACTERISTICS fT Ccbo Cibo 200 8.0 30.0 10 40 80 30 MHz pF pF ns ns ns ns .035 .900 .079 2.000 inches mm SWITCHING CHARACTERISTICS td tr ts tf *Pulse Width .037 .950 .037 .950 www.mccsemi.com Revision: A 1 of 4 2011/01/01 MMBT2907A DC Current Gain vs Collector Current 300 250 200 hFE 150 100 50 VBE(ON) - (V) 0.6 0.4 T = 100°C A 0.2 0 0.1 VCE = 10V 1.2 1.0 0.8 TA = 25°C MCC Micro Commercial Components Base-Emitter ON Voltage vs Collector Current VCE = 5.0V TM 0.1 1 IC (mA) 10 100 1.0 IC - (mA) 10 100 Pulsed Base Saturation Volatge vs Collector Current -1.5 -1.3 -1.1 VBE(SAT) - (V) -0.9 VCE(SAT) - (V) -.1 IC/IB = 10 -.5 Pulsed Collector Saturation Voltage vs Collector Current IC/IB = 10 -0.7 -.05 -0.5 0 -1.0 -.02 -1.0 -10 -100 IC - (mA) -1000 -10 IC - (mA) -100 -1000 Collector Reverse Current vs Reverse Bias Voltage 100 0 TA = 25°C 100 ICES - (µA) 10 pF Input and Output Capacitances vs Reverse Bias Voltage 20 TA = 25°C 16 CIBO 12 8 4 1.0 0 -10 -20 -30 VCE - (V) -40 -50 -60 0 -0.1 COBO -1.0 Volts - (V) -10 www.mccsemi.com Revision: A 2 of 4 2011/01/01 MMBT2907A MCC Micro Commercial Components Turn On and Turn Off Times vs Collector Current 1000 TM Maximum Power Dissipation vs Ambient Temperature 800 600 PD(MAX) - (mW) 400 TO-92 T - (ns) toff 100 ton 10 200 SOT-23 0 0 1.0 10 IB1 = IB2 = IC/10 VCC(OFF) = 15V 100 IC - (mA) Switching Times vs Collector Current 1000 IB1 = IB2 = IC/10 100 VCE - (V) -4 -1.0 -.8 -.4 0 -0.1 1.0 -1.0 -10 IC - (mA) *25MHz increments from 50 to 200MHz -100 td 10 100 IC - (mA) 1000 T - (ns) ts tf tr 1000 50 100 TA - (°C) 150 200 Contours of Constant Gain Bandwidth Product (fT) -10 -8 10 www.mccsemi.com Revision: A 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel;3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01 3