MMBT4403_11

MCC TM Micro Commercial Components
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# M MBT4403 Features • Operating and Storage Junction Temperatures: -55 to 150 Capable of 350mWatts of Power Dissipation Surface Mount SOT-23 Package Ic=-600mA Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 Marking:2T/M3A • • • • PNP General Purpose Amplifier SOT-23 A D Electrical Characteristics @ 25°C Unless Otherwise Specified Symbol Parameter Collector-Emitter Breakdown Voltage* (I C=1.0mAdc, IB=0) Collector-Base Breakdown Voltage (I C=100µ Adc, IE=0) Emitter-Base Breakdown Voltage (I E=100µ Adc, IC=0) Base Cutoff Current (VCE=30Vdc, VBE=3.0Vdc) Collector Cutoff Current (VCE=30Vdc, VBE=3.0Vdc) DC Current Gain* (I C=0.1mAdc, VCE=1.0Vdc) (I C=1.0mAdc, VCE=1.0Vdc) (I C=10mAdc, VCE=1.0Vdc) (I C=150mAdc, VCE=2.0Vdc) (I C=500mAdc, VCE=2.0Vdc) Collector-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Base-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Current Gain-Bandwidth Product (I C=20mAdc, VCE=10Vdc, f=100MHz) Output Capacitance (VCB=10Vdc, IE=0, f=1.0MHz) Input Capacitance (VEB=0.5Vdc, IC=0, f=1.0MHz) Delay Time (VCC=3.0Vdc, VBE=2.0Vdc Rise Time IC=150mAdc, IB1=15mAdc) Storage Time (VCC=3.0Vdc, IC=150mAdc Fall Time IB1=IB2=15mAdc) ≤ 300µ s, Duty Cycle ≤ 2.0% Min 40 40 5.0 0.1 0.1 Max Units C OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX Vdc Vdc Vdc µAdc µAdc G F E C B B E H J K DIMENSIONS INCHES MIN MAX .110 .120 .083 .098 .047 .055 .035 .041 .070 .081 .018 .024 .0005 .0039 .035 .044 .003 .007 .015 .020 MM MIN 2.80 2.10 1.20 .89 1.78 .45 .013 .89 .085 .37 MAX 3.04 2.64 1.40 1.03 2.05 .60 .100 1.12 .180 .51 NOTE ON CHARACTERISTICS hFE 30 60 100 100 20 DIM A B C D E F G H J K 300 VCE(sat) 0.4 0.75 0.75 0.95 1.30 Vdc VBE(sat) Vdc SMALL-SIGNAL CHARACTERISTICS fT Ccb Ceb 200 8.5 30.0 15 20 225 30 MHz pF pF ns ns ns ns .035 .900 Suggested Solder Pad Layout .031 .800 .079 2.000 inches mm SWITCHING CHARACTERISTICS td tr ts tf *Pulse Width .037 .950 .037 .950 www.mccsemi.com Revision: A 1 of 4 2011/01/01 MMBT4403 DC Current Gain vs Collector Current 300 VCE = 10V 250 200 hFE 150 100 50 VBE(ON) - (V) 0.6 0.4 T = 100°C A 0.2 0 0.1 1.2 1.0 0.8 TA = 25°C MCC Micro Commercial Components Base-Emitter ON Voltage vs Collector Current VCE = 5.0V TM 0.1 1 IC (mA) 10 100 1.0 IC - (mA) 10 100 Pulsed Base Saturation Volatge vs Collector Current -1.5 -1.3 -1.1 VBE(SAT) - (V) -0.9 VCE(SAT) - (V) -.1 IC/IB = 10 -.5 Pulsed Collector Saturation Voltage vs Collector Current IC/IB = 10 -0.7 -.05 -0.5 0 -1.0 -.02 -1.0 -10 -100 IC - (mA) -1000 -10 IC - (mA) -100 -1000 Collector Reverse Current vs Reverse Bias Voltage 100 0 TA = 25°C 100 ICES - (µA) 10 pF Input and Output Capacitances vs Reverse Bias Voltage 20 TA = 25°C 16 CIBO 12 8 4 1.0 0 -10 -20 -30 VCE - (V) -40 -50 -60 0 -0.1 COBO -1.0 Volts - (V) -10 www.mccsemi.com Revision: A 2 of 4 2011/01/01 MMBT4403 MCC TM Micro Commercial Components Maximum Power Dissipation vs Ambient Temperature 800 1000 Turn On and Turn Off Times vs Collector Current 600 TO-92 PD(MAX) - (mW) 400 T - (ns) 100 toff ton 10 200 SOT-23 0 0 1.0 10 IB1 = IB2 = IC/10 VCC(OFF) = 15V 100 IC - (mA) Switching Times vs Collector Current 1000 -10 -8 100 VCE - (V) -4 -1.0 -.8 -.4 0 -0.1 1.0 -1.0 -10 IC - (mA) *25MHz increments from 50 to 200MHz -100 td 10 100 IC - (mA) 1000 T - (ns) ts tf tr IB1 = IB2 = IC/10 1000 50 100 TA - (°C) 150 200 Contours of Constant Gain Bandwidth Product (fT) 10 www.mccsemi.com Revision: A 3 of 4 2011/01/01 MCC Micro Commercial Components TM Ordering Information : Device Part Number-TP Packing Tape&Reel;3Kpcs/Reel ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2011/01/01 3