MMST3904-TP

MMST3904 Features • Epitaxial Planar Die Construction • Complementary PNP Type Available MMST3906 • • • • Ultra-Small Surface Mount Package Halogen Free Available Upon Request By Adding Suffix "-HF" Moisture Sensitivity Level 1 Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant ("P" Suffix Designates RoHS Compliant. See Ordering Information) NPN Small Signal Transistors Maximum Ratings @ 25°C Unless Otherwise Specified • • SOT-323 Operating Junction Temperature Range: -55℃ to +150℃ Storage Temperature Range: -55℃ to +150℃ Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Collector Power Dissipation (1) Symbol VCBO VCEO VEBO IC PC Rating 60 40 6 200 200 Note: 1. Valid provided that terminals are kept at ambient temperature. A Unit V V V mA mW D B C F B A B C D E F G H J K E J K DIM C H G Marking: K2N Internal Structure E DIMENSIONS INCHES MM MIN MAX MIN MAX 0.071 0.087 1.80 2.20 0.045 0.053 1.15 1.35 0.083 0.096 2.10 2.45 0.026 0.65 0.047 0.055 1.20 1.40 0.012 0.016 0.30 0.40 0.000 0.004 0.00 0.10 0.035 0.044 0.90 1.10 0.002 0.010 0.05 0.25 0.006 0.016 0.15 0.40 NOTE TYP. Suggested Solder Pad Layout 0.70 (mm) 0.90 1.90 0.65 0.65 Rev.3-1-01012019 1/4 MCCSEMI.COM MMST3904 Electrical Characteristics @ 25°C Unless Otherwise Specified Parameter (2) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage(2) Emitter-Base Breakdown Voltage(2) Base Cutoff Current (2) Collector Cutoff Current (2) DC Current Gain(2) Symbol V(BR)CBO V(BR)CEO V(BR)EBO IBL ICEX hFE(1) hFE(2) hFE(3) hFE(4) hFE(5) Collector-Emitter Saturation Voltage(2) VCE(sat) Base-Emitter Saturation Voltage(2) VBE(sat) Min 60 40 5 Typ Max 50 50 40 70 100 60 30 300 0.25 0.3 0.85 0.95 4.0 8.0 10 8 400 40 0.65 Output Capacitance Input Capacitance Input Impedance Voltage Feedback Ratio Small Signal Current Gain Output Admittance Transition Frequency Ccbo Cibo hie hre hfe hoe fT Noise Figure NF 5 td tr 35 35 Delay Time Rise Time Units V V V nA nA 1 0.5 100 1 300 V V V V pF pF KΩ x104 Conditions IC=10µA, IE=0 IC=1mA, IB=0 IE=10µA, IC=0 VCE=30V, VEB(OFF)=3V VCE=30V, VEB(OFF)=3V VCE=1V, IC=0.1mA VCE=1V, IC=1mA VCE=1V, IC=-10mA VCE=1V, IC=50mA VCE=1V, IC=500mA IC=10mA, IB=1mA IC=50mA, IB=5mA IC=10mA, IB=1mA IC=50mA, IB=5mA VCB=5V, IE=0, f=1MHz, VBE=0.5V, IC=0, f=1MHz, VCE=10V, IC=1mA, f=1KHz uS MHz VCE=20V, IC=10mA, f=100MHz VCE=5V, IC=0.1mA dB RS=1KΩ, f=1KHz ns ns VCC=3V, IC=0.1mA VBE(OFF)=-0.5V, IB1=1mA Note: 2.Pulse Width ≤ 300μs, Duty Cycle≤2.0% Rev.3-1-01012019 2/4 MCCSEMI.COM MMST3904 Curve Characteristics Fig. 2 - DC Current Gain Characteristics Fig. 1 - Static Characteristics 300 20 COMMON EMITTER TA=25°C 100μA 250 80μA 15 70μA DC Current Gain Collector Current (mA) 90μA Common Emitter VCE= 1V TA=100°C 60μA 10 50μA 40μA 30μA 5 20μA 200 TA=25°C 150 100 50 IB= 10μA 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 0.1 4.0 1 Collector-Emitter Voltage (V) Fig. 3 - Collector-Emitter Saturation Voltage Characteristics Base-Emitter Saturation Voltage (V) Collector-Emitter Saturation Voltage (mV) 200 1.0 300 200 TA=100°C 100 TA=25°C β=10 1 10 100 0.8 TA=25°C 0.6 TA=100°C 0.4 β=10 0.2 0.1 200 1 Collector Current (mA) Fig. 5 - Base-Emitter Voltage Characteristics Common Emitter VCE=1V TA=100°C 10 TA=25°C 1 0.1 0.3 0.4 0.5 0.6 0.7 0.8 0.9 200 200 150 100 50 0 1.0 Base-Emitter Voltage (V) Rev.3-1-01012019 100 Fig. 6 - Collector Power Derating Curve 250 Collector Power Dissipation (mW) 100 10 Collector Current (mA) 200 Collcetor Current (mA) 100 Fig. 4 - Base-Emitter Saturation Voltage Characteristics 400 0 10 Collector Current (mA) 0 25 50 75 100 125 150 Ambient Temperature (°C) 3/4 MCCSEMI.COM MMST3904 Ordering Information Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 4/4 MCCSEMI.COM